Distribution Agreement - CTI PET Systems Inc. and Siemens Medical Solutions USA Inc.
DISTRIBUTION AGREEMENT
FOR CPS PET PRODUCTS
This DISTRIBUTION AGREEMENT is effective as of the 1st day of March,
2002 (the "Effective Date"), by and between CTI PET SYSTEMS, INC., a corporation
organized and existing under the laws of the State of Tennessee (hereinafter
"CPS"), and SIEMENS MEDICAL SOLUTIONS USA, INC., a corporation organized and
existing under the laws of Delaware (hereinafter "DISTRIBUTOR").
RECITALS:
CPS is engaged in the development, manufacture, assembly, selling, and
licensing of hardware, software, systems and equipment, and parts and components
thereof, used in the Positron Emission Tomography ("PET") business.
Distributor is engaged in the development, manufacture, assembly,
selling and licensing of hardware, software, systems and equipment, and parts
and components thereof, used in the provision of healthcare services,
individually and in conjunction with certain CPS products and is in the business
of selling various types of medical equipment and desires to distribute, market
and service such CPS products.
CPS desires to have Distributor distribute, market and service certain
of its products for use or application in the PET market.
NOW, THEREFORE, in consideration of the terms and conditions contained
herein, the parties mutually agree to be bound as follows:
1. DISTRIBUTION RIGHTS AND LICENSE.
a. DISTRIBUTION RIGHTS. Subject to the terms and conditions of
this Agreement, CPS hereby grants to Distributor, and
Distributor hereby accepts, rights to distribute the CPS
products, including any Software (as defined below) imbedded
therein or otherwise distributed therewith and spare and
replacement parts and accessories, described on EXHIBIT A
attached hereto (the "Products") for use or application in the
PET market to end-users and customers ("Customers") throughout
the world (the "Territory").
b. LICENSE. Subject to all of the terms and conditions of this
Agreement, CPS hereby grants to Distributor, and Distributor
hereby accepts, a non-exclusive, nontransferable (except as
transfer
<PAGE>
is permitted in Section 18(d) hereof), royalty-free (subject
to payment of all fees set forth in this Agreement) license in
the Territory, with the right to sublicense to Customers
located within the Territory, in and to certain of the
technology, know-how and intellectual property rights related
to the Products (the "Technology") and to any and all software
(including tool sets and object code), operation and service
manuals and other documentation that are generally provided by
CPS to its Customers and similarly-situated distributors
("Software") necessary to, and solely for the purpose of,
marketing, selling, configuring, modifying, distributing,
installing and servicing of the Products in accordance with
this Agreement. Subject to the limitations set forth in this
Agreement, this license shall permit Distributor to configure,
to modify, to repair, to install, to service, to develop new
applications and features and to maintain the Products as
further described in this Agreement.
c. REQUIREMENTS. Except for those entities listed on EXHIBIT B
hereto which list shall be amended from time to time by the
mutual agreement of the parties, Distributor is permitted to
appoint any other person, firm, or entity as a sub-distributor
or agent for the Products without the prior written consent of
CPS. Distributor and any sub-distributors or agents of
Distributor appointed pursuant to the terms of this Agreement
shall be permitted to distribute the Products, including the
sublicense of the Software, only pursuant to and in accordance
with one or more written sales/license agreements entered into
between the Customer and Distributor and having at a minimum
the mandatory minimum terms and conditions as set forth in
Distributor's standard customer sales agreement attached
hereto as EXHIBIT C (hereinafter "Customer Sales Agreement").
Subject to the terms in the Customer Sales Agreement, the
licenses granted to Customers may be perpetual and, if so,
shall be deemed to survive any termination or expiration of
this Agreement. Distributor acknowledges that certain of the
Software has been or will be developed by CPS ("CPS Software")
and certain of the Software has been or will be developed by
CPS's suppliers and licensors ("Third Party Software"), and
some of the software has been or will be developed by
Distributor ("Distributor Software") and therefore, such Third
Party Software may be subject to certain limitations set forth
in the license agreements between CPS and its licensors and
suppliers relating to Third Party Software (excluding the
Distributor Software). CPS will identify to Distributor any
such restrictions to the extent they differ from the terms in
this Agreement, and Distributor agrees to comply with such
restrictions. CPS hereby warrants that the restrictions
relating to Third Party Software (excluding the Distributor
Software) shall not limit Distributor's rights under this
Agreement and, should Distributor's rights be limited in
conflict with the purposes of this Agreement, CPS shall use
commercially reasonable efforts to obtain all necessary rights
from any such licensor and supplier, other than
2
<PAGE>
the Distributor, for Distributor to permit Distributor to
fully exercise its benefits and purposes under this Agreement.
d. SYNGO(TM) LICENSE. Distributor acknowledges that syngo(TM)
software ("syngo") is incorporated into the software system of
certain Products and that CPS has entered into a License
Agreement (the "Siemens License Agreement") with Siemens AG
("Siemens") pursuant to which CPS obtained the right to
sublicense and distribute syngo(TM) to its distributors and
end-users. Accordingly, CPS hereby grants to Distributor a
non-exclusive, non-transferable license in the Territory to
distribute and sublicense to its subdistributors and Customers
syngo(TM) in object code format as an integrated part of the
Products. Distributor shall also be entitled to receive such
documentation regarding syngo(TM) as is provided by CPS to its
other similarly situated distributors. Distributor's right to
distribute and sublicense syngo(TM) and the documentation
relating to syngo(TM) is subject to Distributor's compliance
with the following obligations and restrictions:
i. Distributor shall not be entitled to receive
the source code for syngo(TM) and under no
circumstances shall Distributor
reverse-compile or reverse assemble
syngo(TM);
ii. Distributor shall not be permitted to modify
the configurations files of syngo(TM) or to
develop add-ons or extensions to syngo(TM)
without the prior written approval of CPS;
iii. Unless Distributor receives the prior
written approval of CPS, all copies of
syngo(TM) licensed by Distributor and all
documentation provided therewith must
contain those trademark and copyright
notices in the format and location set forth
on Exhibit J hereto (the "IP Notices")
together with such additional IP notices as
shall be added to Exhibit J from time to
time in the sole discretion of CPS and such
IP Notices must not be removed or altered;
iv. Distributor shall, at Distributor's expense,
reasonably assist CPS to investigate and
terminate any alleged or actual misuse or
misappropriation of syngo(TM), which
assistance shall include, but shall not be
limited to, providing all available
information requested by CPS;
v. Neither Distributor, nor its subdistributors
or Customers shall at anytime have title to
syngo(TM) ;
vi. Distributor agrees to maintain all
confidential information related to
syngo(TM) or to Siemens in accordance with
the confidentiality provisions set forth in
Section 15 hereof; and
3
<PAGE>
vii. Distributor shall enter into an agreement
with its subdistributors and Customers
requiring them to comply with the terms and
conditions set forth in this Section 1(d)
and with any other provisions of this
Agreement that relate to Distributor's
rights and obligations with respect to
syngo(TM).
e. NON-EXCLUSIVE ARRANGEMENT. Distributor acknowledges that this
is a non-exclusive arrangement. Nothing contained herein shall
prohibit CPS from distributing the Products itself, from
authorizing others to distribute the Products, from using the
Technology and the Software for its own purposes, or from
licensing the Technology and Software to other parties.
2. PRODUCTS.
a. ADDITIONAL PRODUCTS. The Products covered by this Agreement
are those listed on EXHIBIT A, as well as those Products that
shall be added to EXHIBIT A from time to time in the sole
discretion of CPS. Notwithstanding the foregoing, CPS agrees
that Distributor shall have access to new Products developed
by CPS on the same terms and conditions that CPS grants
distribution rights to CTI throughout the term of this
Agreement. In the event CPS proposes to implement a product
differentiation approach to new Product development, CPS
shall either (i) make those Products available to CTI
available to Distributor on the same terms and conditions; or
(ii) work with both Distributor and CTI to develop mutually
acceptable unique lines of Products. EXHIBIT A shall include
all relevant technical and performance specifications for all
Products listed.
b. UPGRADES AND UPDATES. CPS shall provide to Distributor at no
additional cost any and all updates to the CPS Software
developed to correct or work around software design errors.
CPS shall also provide Distributor all updates received by CPS
from the developer of any Third Party Software, excluding the
Distributor Software, developed to correct or work around
design errors impacting CPS's Products. All new Software
developed by CPS and all upgrades (which for purposes of this
Agreement, shall mean a change in the initial functionality of
such Software) to the CPS Software or Third Party Software,
excluding the Distributor Software, shall be licensed to
Distributor at the price established by CPS, which shall not
exceed the prices paid for such upgrades by CPS's other
distributors based on comparable volumes. The licenses granted
to Distributor under this Agreement shall apply to any and all
such upgrades or updates.
c. PRODUCT DISCONTINUANCE. If, during the Term of this Agreement,
CPS intends to discontinue the production of any of the
Products, or to withdraw any of the Products from distribution
under this Agreement, CPS shall notify Distributor as soon as
reasonably practicable, but in no event less than one hundred
and eighty (180) days prior to discontinuing the Product;
provided, however, such 180 day notice period shall not apply
if the discontinuance is due to (i) the discontinuance by a
CPS supplier of any essential component used in the
manufacture of the Product; (ii) the inability of CPS to
obtain any essential raw materials on commercially reasonable
terms, or (iii) any other circumstances that are outside the
reasonable control of CPS.
4
<PAGE>
Upon receiving notice of a discontinuance, Distributor and CPS
shall negotiate in good faith a reasonable arrangement for the
purchase of additional Product units, continuation of spare
parts supply and other matters related to the cessation of
Product sales under this Agreement. If CPS elects to
discontinue any of the ECAT HR+, the ECAT ART, the ECAT EXACT,
the ECAT ACCEL, the ECAT EMERGE, the PET/CT or their
replacements or any other Products mutually agreed to in
writing by the parties following the effective date (the
"Primary Products") without providing a suitable substitute
with, similar cost and substantially similar or improved
functionality, Distributor may, in its sole discretion,
terminate this Agreement.
d. DEVELOPMENT OF ADDITIONAL PRODUCTS. If during the term of this
Agreement, the parties determine that they wish to develop
certain additional components, products, configurations,
scanners, technologies, options or other intellectual property
which is to be used in the manufacture or assembly of the
Products, then the parties agree to negotiate in good faith
the terms of a co-development agreement ("Co-Development
Agreement"), with the understanding that such Co-Development
Agreement will establish the ownership of rights in and to the
co-developed products, including without limitation, any
components, parts, software, hardware or intellectual property
relating thereto, and the terms of such Co-Development
Agreement will not be restricted or amended by the terms
contained herein.
e. ALPHA AND BETA TESTING. In connection with the development of
the worldwide market for the Products, the parties understand
and agree that certain sites should be designated as Alpha
Testing Sites or Beta Testing Sites. For the purposes of this
Agreement, an Alpha Testing Site will be used for research
only purposes, and generally relate to Products which are not
yet approved for commercialization. The choice of the Alpha
Testing Site will be the responsibility of CPS, with the
understanding that the input of the Distributor may be sought,
should CPS so decide. For the purposes of this Agreement, Beta
Testing Sites will be used to obtain clinical feedback on
Products after 510(k) clearance or other commercialization
approvals have been attained. The parties agree that Beta
Testing Sites may be used for product evaluation purposes and
that commercially available Products may be used by a Beta
Testing Site on patients, all in accordance with mutually
agreed standards and terms and in accordance with applicable
laws and regulations.
In addition to the Alpha Testing Site, CPS shall determine the
total number of available Beta Testing Sites and shall
determine the location of the first Beta Testing Sit.
Additional Beta Testing Sites shall be determined by each of
CPS's respective distributors based on their proportional
contribution to CPS's overall sales volume. For the fiscal
year ending September 30, 2002,
5
<PAGE>
Siemens Medical Systems, Inc., and CPS will mutually select
75% of the Beta Testing Sites and CPS's and its other
distributors,, will mutually select 25% of the Beta Testing
Sites. In each fiscal year following September 30, 2002, the
number of Beta Testing Sites selected by each of CPS's
distributors will be based on each distributor's respective
share of shipments for the prior fiscal year. In cases where a
joint decision on a Beta Testing Site is deadlocked, the fifth
member of the Board of Directors of CPS, who is not designated
by CTI or Distributor, shall break the deadlock by selecting
the location of the Beta Testing Site. The Beta Testing Site
selected by the fifth director must be one of the Beta Testing
Sites proposed by either Distributor or CPS.
3. TERRITORY. The Territory for sales of Products by Distributor, itself
or through subdistributors or agents, shall be worldwide.
4. SALES RESPONSIBILITIES. Distributor will be responsible for Product
sales to customers in the Territory. Pursuant to its appointment by CPS
as a distributor for the Products, Distributor shall use commercially
reasonable efforts to:
a. Develop the market for, and promote the sale of, the Products
including marketing, distribution, installation and service of
the Products ;
b. Maintain a marketing, sales and service organization in the
Territory properly trained to support the distribution of the
Products and to provide proper installation and servicing
thereof according to training provided by CPS;
c. Issue to CPS on or before the first day of each month a
rolling twelve (12) month non-binding forecast with
non-binding anticipated delivery dates in a form substantially
similar to EXHIBIT E hereto which format may be amended from
time to time by the mutual agreement of the Parties.
5. TERMS AND CONDITIONS OF SALES.
a. PRICING. List prices of Products (excluding spare and
replacement parts which are set forth on EXHIBIT H) are as set
forth on EXHIBIT A (the "List Prices"). The List Prices set
forth on EXHIBIT A may be changed by CPS in its sole
discretion from time to time, but in no event more frequently
than once every * . Any change in the List Prices shall not
impact the price set forth in a firm purchase order accepted
by CPS prior to the price change. Distributor acknowledges
that the manufacturing cycle for the Products may be as long
as two hundred and forty (240) days.
* Omitted information is the subject of a request for confidential
treatment pursuant to Rule 406 under the Securities Act of 1933 and has been
filed separately with the Securities and Exchange Commission.
6
<PAGE>
For CPS's own business purposes, the manufacturing cycle may
be accelerated ("CPS Accelerated Product") or the number of
Products as work in progress may exceed the number of firm
purchase orders then active with CPS from all distributors
("CPS Excess Product"). Should Distributor request delivery of
any Product in less than 240 days, Distributor may contact CPS
regarding the availability of such CPS Accelerated or Excess
Products. CPS shall inform Distributor as to the availability
and anticipated delivery date for such Products. If available,
Distributor shall have a one time right for each prospective
purchase requiring a delivery date of less than one hundred
and eighty (180) days to require CPS to reserve a CPS
Accelerated or Excess Product for Distributor for fifteen (15)
days *. If Distributor does not provide a proper purchase
order for such unit within the fifteen (15) day period, the
Product reservation shall expire. Should no CPS Accelerated or
Excess Products be available from CPS and Distributor requests
accelerated delivery of a Product, Distributor agrees to pay
additional costs associated with the acceleration of the
manufacturing cycle, which costs shall be mutually agreed upon
by the parties in the applicable purchase order.
b. TRANSFER PRICES. The transfer price percentages for Products
purchased by Distributor from CPS are set forth on EXHIBIT D
hereto. The actual transfer price to be paid by Distributor
for the Products (the "Transfer Price") shall equal the List
Price times the transfer price percentage minus the Warranty
Discount (as defined in Section 7). The initial measurement
term for shipments and transfer price percentages under this
Agreement shall be twelve (12) months, commencing as of
October 1, 2001 and terminating as of September 30, 2002.
Shipments that are priced under the Distribution Rights
Agreement, dated June 30, 1997, between CPS and Distributor
(the "OEM Agreement") and which are related to sales orders
received by CPS after October 1, 2001, shall be included in
the shipments made between October 1, 2001 and September 30,
2002 for purposes of determining the transfer price
percentages.
(i) The remaining measurement terms for the life
of this Agreement shall be the twelve (12)
month periods commencing October 1 and
terminating September 30 thereafter. If the
term of the Agreement extends beyond any
September 30, the parties may agree to
extend the final measurement period or
pro-rate requirements for such period.
(ii) Distributor's initial transfer pricing
percentages will be based on the initial
twelve (12) month booking forecast provided
by Distributor pursuant to Section 4(c)
hereof, with the understanding that
shipments during the period commencing as of
the Effective Date of this Agreement and
ending September 30, 2002,
* Omitted information is the subject of a request for confidential
treatment pursuant to Rule 406 under the Securities Act of 1933 and has been
filed separately with the Securities and Exchange Commission.
7
<PAGE>
will be pro-rated and/or adjusted in order
to conform with actual shipments, if needed.
(iii) In the remaining measurement periods,
transfer price percentage levels will be set
based on the actual number of units shipped
in the prior measurement period, subject to
reconciliation and adjustment at the end of
such measurement period.
(iv) Units shipped, not units purchased, shall be
the number used to determine the number of
units "sold" for the purposes of determining
transfer price percentage levels; provided,
that if CPS fails, through no fault of the
Distributor, to ship a unit on the shipment
date set forth in a purchase order accepted
by CPS, the unit that is the subject of the
purchase order shall be deemed to be shipped
on the shipment date set forth in the
purchase order for purposes of calculating
the units "sold".
Transfer price percentages are based upon the actual number of
units shipped in the previous measurement period. Accordingly,
if actual units shipped in the relevant discount period would
result in Distributor receiving a higher discount then the
higher discount shall be retroactively applied to the units
shipped during the relevant discount period and the
Distributor shall receive a refund for all payments made in
excess of the highest achieved discount. For example, if
Distributor is receiving a discount based on the 51-100 level
then upon receipt of payment in connection with the sale of
the 101st unit, an additional *% per unit for the first 100
units shall be refunded to Distributor at the end of the
current discount period. If the actual units shipped during
the relevant discount period would result in Distributor
receiving a lower discount, then the lower discount would be
retroactively applied to the units shipped during the relevant
discount period and CPS shall receive an additional payment
from Distributor in the amount of the underpayments made as a
result of applying the higher discount. For example, if
Distributor is receiving a discount based on the 51-100 level
and in the relevant discount period Distributor only sells 40
units, then Distributor shall pay CPS an additional * % for
the first 40 units purchased by Distributor. All adjustments
payable to CPS or Distributor, as applicable, shall be paid
within ten (10) working days from the end of the defined
discount period, and in any event, no later than October 15th
of any given calendar year. The transfer price percentages set
forth on EXHIBIT D are based on Distributor providing the
installation and one-year warranty service referenced in
Section 8(a). If Distributor contracts with CPS for CPS to
provide such installation and one year warranty service,
Distributor shall pay CPS the amounts set forth on EXHIBIT G
hereto in accordance with the payment terms set forth in
Section 8(a) hereof. The prices for the installation and
warranty service set forth on EXHIBIT G are exclusive of any
* Omitted information is the subject of a request for confidential
treatment pursuant to Rule 406 under the Securities Act of 1933 and has been
filed separately with the Securities and Exchange Commission.
8
<PAGE>
discounts or allowances and may be changed from time to time
by CPS in its sole discretion, but no more than *.
c. TRANSFER PRICING ADJUSTMENTS. CPS and Distributor will review
market conditions on a semi-annual basis to determine whether
transfer pricing is representative and competitive with market
conditions; provided, that the first semi-annual review will
occur not later than April 1, 2002. CPS will make appropriate
adjustments to transfer pricing if required to meet market
conditions, and adjust pricing retroactive to March 1, 2002.
Adjustments will be based upon reports from industry analysts
(e.g., Frost and Sullivan). This analysis will be based on the
United States market only for CPS PET systems of similar
configuration and comparable performance. Any such adjustments
will be effective thirty (30) days after each semi-annual
review. Distributor shall have sole authority to establish its
own pricing for Products without regard to any adjustment,
assessment or analysis referred to herein.
d. PAYMENT TERMS. Payment terms for orders received by CPS from
Distributor will be * percent (*%) upon acceptance of the
purchase order by CPS and receipt of an invoice by
Distributor, * percent (* %) upon shipment from the factory
and receipt of an invoice by Distributor (net 30 days), and
the balance sixty (60) days after shipment and receipt of an
invoice by Distributor (net 30 days).
e. LATE PAYMENT CHARGES. If Distributor fails to make timely
payment, then in addition to any other right that CPS may
have, Distributor shall pay to CPS a late payment charge of *
% per month on the amount outstanding. The late payment charge
shall be calculated from the date that the unpaid charges
become due and shall be compounded monthly for the period the
charges remain unpaid. The parties agree that if non-payment
of any amount due by Distributor to CPS is a result of
non-payment by Distributor's Customer due to the (a) failure
of the Products to meet specifications; (b) non-acceptance of
the Products due to defects in workmanship or materials unless
such defects are due to the actions of Distributor or its
agents or sub-distributors; or (c) failure of CPS to provide
all components or parts of Products, then Distributor shall
not be liable for any late payment charges until such time as
CPS has corrected the Product defects or failures or delivered
the missing components or parts, and such corrected Product
has been accepted by Distributor's Customer.
f. MINIMUM PURCHASES. Distributor agrees to take delivery of at
least ten (10) Primary Products during each one-year term of
this Agreement. In the event that shipments from CPS to
Distributor fall below * Primary Products in the aggregate in
any one year term, then CPS shall
* Omitted information is the subject of a request for confidential
treatment pursuant to Rule 406 under the Securities Act of 1933 and has been
filed separately with the Securities and Exchange Commission.
9
<PAGE>
have the right, in its sole discretion, to terminate this
Agreement for cause, as provided in SECTION 16 hereof without
the necessity of giving the ninety (90) days from notice cure
period provided for in SECTION 16(d). During any year
following the second anniversary of the Effective Date, CPS
shall have the right to remove any Primary Product from the
list of Products distributed by Distributor if Distributor
fails to take delivery of * or more of any such Primary
Product during any one year term of this Agreement.
Termination of this Agreement is CPS's sole and exclusive
remedy for Distributor's failure to order the minimum number
of units required by this paragraph. Notwithstanding CPS's
rights under this paragraph , in the event CPS terminates this
Agreement or removes a Product from the list of Products
authorized to be distributed by Distributor, CPS shall be
obligated to satisfy its obligations under any purchase order
approved by CPS prior to the date of termination of this
Agreement or such removal of a Product. Notwithstanding the
foregoing, if during the initial twelve (12) month term of
this Agreement Distributor fails to accept delivery of at
least * ECAT ART units, Distributor shall have the right to
remove the ECAT Art from the list of Products made available
to Distributor for distribution.
g. SHIPPING TERMS AND PACKAGING. Sales shall be f.o.b. point of
shipment at CPS's manufacturing facility. CPS shall be
responsible at its expense for the proper packaging of the
Products for safe shipment and Distributor shall pay freight
charges from the point of shipment to the point of delivery.
Attached hereto as EXHIBIT F, and incorporated herein by
reference, are the requirements for packaging and labeling
data as established by Distributor and/or Distributor's
parent, and CPS shall incorporate such requirements into any
packaging or labeling provided by CPS. Title and risk of loss
shall pass to Distributor as soon as the goods have been
placed on board the carrier at the point of shipment.
Distributor assumes responsibility for effecting the export of
the Products including obtaining any required export licenses,
for proper use of the export licenses and for due performance
for all terms and conditions of such export licenses. CPS will
provide all necessary paperwork under its control for such
export licenses and administration.
h. NON-REFUNDABLE SALES. Excluding warranty returns, no orders
allowing cancellation rights or right of return will be
accepted unless Distributor and CPS have agreed in writing to
accept the risk prior to accepting the order. Returns and
cancellations for warranty reasons are expressly permitted
without such additional written agreement.
i. TAXES. It is understood that, as of the day of this Agreement,
the Parties believe that there are no sales or other similar
taxes applicable to the sale of Products by CPS to
Distributor.
* Omitted information is the subject of a request for confidential
treatment pursuant to Rule 406 under the Securities Act of 1933 and has been
filed separately with the Securities and Exchange Commission.
10
<PAGE>
Accordingly, the list prices set for on EXHIBIT A are
exclusive of any applicable sales or other taxes. In the event
any governmental entity imposes any tax on the sale of
Products to Distributor, Distributor shall pay the amount of
such tax directly to such governmental entity or, if required
by law, remit pay the amount of the applicable taxes to CPS
upon receipt of the Products and CPS shall pay the tax
directly to the appropriate governmental entity.
j. EXCLUSIVE TERMS AND CONDITIONS. It is understood and agreed by
the parties that all purchase orders issued by Distributor and
all quotations and order acceptance or acknowledgements issued
by CPS shall be subject to the terms and conditions of this
Agreement exclusively. Neither the standard terms and
conditions of Distributor's purchase orders or the standard
terms and conditions of CPS's quotations, acceptance or
acknowledgments shall have effect.
k. COMPARABLE PRICING. CPS represents and warrants that the net
Transfer Prices for the Products as established by Section
5(b) shall not exceed the net Transfer Prices provided by CPS
to any other distributor of its Products based upon comparable
volumes.
l. TRANSITION PERIOD. All sales of Products that are made to
Customers or subdistributors of Distributor based on or
arising out of an unexpired quote that was initially issued on
or before September 30, 2001 or a quote where a Customer
submitted a purchase order prior to September 30, 2001 shall
be priced under the terms of the OEM Agreement. All sales of
Products made to Customers or subdistributors of Distributor
based on or arising out of quotes initially issued after
September 30, 2001 shall be sold and distributed pursuant to
the terms of this Agreement.
6. SHIPMENT, DELIVERY AND ACCEPTANCE.
a. PRODUCT TESTING. CPS shall test each Product prior to shipment
to determine that it functions properly and meets the
technical and performance specifications set forth on EXHIBIT
A hereto (the "Certification Test"). In the event CPS makes
any material change to the specifications set forth on EXHIBIT
A which materially impacts the form, fit or function of the
Products, CPS shall provide Distributor one hundred and eighty
(180) days notice prior to implementing the change; provided
however, such 180 day notice period shall not apply if the
change in specifications is due to (i) the discontinuance by a
CPS supplier of any essential component used in the
manufacture of the Product; (ii) the inability of CPS to
obtain any essential raw materials on commercially reasonable
terms, or (iii) any other circumstances that are outside the
reasonable control of CPS. A copy of the Certification Test
report shall be included with the set of installation,
operation and service manuals shipped with the Products. CPS
grants Distributor
11
<PAGE>
the right to observe CPS's Certification Test, but
Distributors failure to do so does not relieve in any way CPS
of its obligation to perform such Certification Test. All
Certification Tests and documentation methodology shall
conform to current Quality System Regulation ("QSR")
standards.
b. TESTING RESULTS. CPS shall notify Distributor in writing of
completion of each CPS's Certification Test performed per the
terms of paragraph 6(a), including noncompliance with all
relevant details. If Product fails any part of CPS's
Certification Test, Distributor reserves the option, in its
sole discretion, to accept the deviation by written
notification to CPS or to have the Product replaced. CPS may
not ship any Product that has failed in whole or in part CPS's
Certification test unless authorized by Distributor in a
written notification to CPS. Notwithstanding deviations
approved by Distributor in writing, Distributor's
Authorization for Shipment of such Product does not constitute
final Product acceptance which shall take place at the
Installation Site and upon commissioning. Distributor does not
waive any rights whatsoever upon accepting any deviation under
this Section 6(b).
c. DELIVERY DATES. The delivery date for each Product shipment
shall be established in a binding purchase order between CPS
and Distributor. CPS shall have the right in its sole
discretion to accept or reject any requested delivery date of
less than two hundred and forty (240) days. If requested by
Distributor, CPS shall provide to Distributor non-binding
anticipated lead times for the delivery of Products. These
anticipated lead times shall be used by Distributor as a guide
only.
d. LIQUIDATED DAMAGES FOR DELAY IN DELIVERY. CPS acknowledges
that its failure to deliver any Product according to the
shipment date specified in the applicable purchase order will
result in expense and damage to Distributor. CPS shall use all
reasonable efforts to deliver the Products on schedule. CPS
shall inform Distributor as soon as reasonably practicable of
any anticipated delay in the delivery schedule and of the
actions being taken to assure completion or delivery of within
a time period acceptable to Distributor. The parties
acknowledge and agree that damages to Distributor for delay in
delivery according to with the shipment date and under this
Agreement would be difficult to ascertain or estimate. After a
30 day grace period, CPS shall pay, for each delayed Product,
liquidated damages to Distributor in the amount of one and one
half percent (1.5%) of Distributor's net Transfer Price each
additional month after the missed shipment date until the
delayed Product is delivered according to Distributor's
instruction; provided that, liquidated damages shall not
exceed five (5%) of Distributor's net Transfer Price. The
parties agree that (i) such amounts are a reasonable estimate
of the damages that Distributor
12
<PAGE>
would sustain for any such delay in delivery, and (ii) such
amounts are not a penalty. If CPS has not delivered the
Product within ninety days (90) after the shipment date agreed
upon in the applicable purchase order, then Distributor may
terminate the purchase order without penalty. Notwithstanding
the foregoing, none of the remedies in this Section 6(d) shall
apply in the event CPS is unable to deliver a Product on the
required delivery date as a result of a Force Majeure Event,
as that term is defined in Section 18(a).
e. LIQUIDATED DAMAGES FOR DELAY IN ACCEPTANCE. Distributor
acknowledges that its failure to accept h delivery of a
Product will result in expense and damage to CPS. Accordingly,
Distributor must notify CPS thirty (30) days in advance if
Distributor will be unable to accept the Product on the
shipment date set forth in the purchase order. Upon receipt of
notice, CPS shall use its reasonable efforts to find another
buyer for the Products. If CPS is unable to find another buyer
for the Products within sixty (60) days following the
scheduled delivery date, Distributor will be required to
accept delivery of and pay for the Products in accordance with
the payment terms set forth in Section 5. If Distributor fails
to provide thirty (30) days prior notice of its inability to
accept shipment of a Product on the shipment date set forth in
the applicable purchase order, Distributor will be required to
accept delivery of and pay for the Products on the shipment
date set forth in the applicable purchase order.
Notwithstanding the foregoing, none of the remedies, including
any remedy which may be imposed should Distributor fail to
provide thirty (30) days prior notice of its inability to
accept delivery of a product, in this Section 6(e) shall apply
in the event Distributor is unable to accept delivery of a
Product on the required delivery date as a result of a Force
Majeure Event impacting Distributor, as that term is defined
in Section 18(a).
7. WARRANTY.
a. HARDWARE.
(i) Except as provided in Section 7(a)(ii), Section 7(a)(iii) and
Section 8 hereof, Distributor shall be responsible for the
cost of replacement parts, replacement components, consumables
and service labor for the Products. In order to assist
Distributor with the cost of these items, Distributor will
receive a one time warranty discount on the purchase of the
Products in the following amounts (the "Warranty Discount"):
Product Warranty Discount
-------------------------
ECAT ART $ *
PET/CT (BGO and LSO) $ *
ECAT HR+ $ *
ECAT EXACT $ *
ECAT ACCEL $ *
ECAT EMERGE $ *
* Omitted information is the subject of a request for confidential
treatment pursuant to Rule 406 under the Securities Act of 1933 and has been
filed separately with the Securities and Exchange Commission.
13
<PAGE>
On the each anniversary of the Effective Date, CPS
and Distributor shall review the actual costs for
warranty parts for the Products during the preceding
year and based on such review CPS, in its sole
discretion, may increase or decrease the Warranty
Discount for the sales of future Products. In
addition, when a new Product is added to EXHIBIT A
CPS, in its sole discretion, shall set an appropriate
Warranty Discount for such new Product.
Notwithstanding the foregoing, if Distributor elects
to have CPS provide the installation and warranty
service provided for in Section 8(a) with respect to
a Product, Distributor shall not receive a Warranty
Discount on the purchase of such Product.
(ii) Notwithstanding anything to the contrary set forth in
this Agreement, CPS makes no warranty with respect to
the computer tomograph (the "CT") incorporated into
the PET/CT. The only warranty with respect to the CT
is the warranty provided by Siemens A.G. in that
certain Business Partner Agreement, dated March 20,
2002, between Siemens A.G. and CPS (the "Business
Partner Agreement"). Distributor or its Customers
shall be solely responsible for obtaining warranty
services on the CT from Siemens A.G.
(iii) If a Product suffers a Functionality Error (as
defined below) during a period equal to (i) the
earlier of twelve (12) months from the date of
acceptance by Distributor's customer or eighteen (18)
months from the date of shipment from CPS to
Distributor, with respect to the Products other than
the repair and replacement parts (the "Warranty
Term"), then CPS, at its sole cost and expense, will
either repair or replace such Product. For purposes
of this Agreement, a Functionality Error means an
error or defect that substantially impairs the use,
value or safety of a Product and which error or
defect is unable to be remedied by Distributor
through ordinary and routine service or maintenance
procedures.
(iv) For purposes of establishing the Warranty Term,
Distributor shall be obligated to provide CPS with
written notice within ten (10) days following the
acceptance of a Product by Distributor's customers.
(v) Distributor shall grant CPS such adequate time as
Distributor and CPS deem reasonable to remedy any
Functionality Error; provided, however, that in
determining such "reasonable" period of time, CPS
agrees to use its commercially reasonable efforts to
comply with Distributor's request.
14
<PAGE>
(vi) If the adequate time period described in subsection
7a(v) above has expired, and the Functionality Error
has not been remedied, Distributor shall have the
right to claim from CPS an appropriate and reasonable
reduction of the Transfer Price paid for such
Product.
(vii) Liability for Functionality Errors does not include
failures caused by normal wear and tear, nor damage
arising after transfer of risk due to faulty or
negligent handling, excessive strain, unsuitable
methods of operation, improper storage, service
provided by Distributor and any other inappropriate
or negligent care, to the extent such excluded
actions are the proximate cause of the Functionality
Error.
(viii) CPS's total liability shall be limited to the level
described in subsection 7a(iii) above. In order to
minimize any damage to the Product, Distributor will
(A) comply with CPS's written instructions in respect
of permitted combinations of Products, components or
parts, with any other products manufactured, sold or
utilized by Distributor, particularly in regard to
any safety issues which may arise therefrom, (B) not
authorize the combination of Products with any other
products which are not included within the
instructions of permitted products provided by CPS,
(C) obtain replacement, spare or inventory parts for
the Products either from CPS directly or from sources
authorized by CPS. CPS shall not be liable for the
results of inexpert or unauthorized alterations,
modifications, or repairs carried out on the Product
by any "unauthorized personnel." For purposes of the
preceding sentence, "unauthorized personnel" means
any person other than a CPS certified employee, an
employee of Distributor trained by a certified CPS
employee or a person trained through a Distributor
training program that has been certified by CPS.
Until such time as a certified training program has
been established by CPS, personnel trained in a
program organized by Distributor and which is taught
by a CPS certified employee or a person trained by a
CPS certified employee shall be considered a training
program certified by CPS.
(ix) CPS shall not be liable to Distributor for any claims
other than those expressly stated herein, and in
particular shall not be liable for any consequential
damages. Except for the exclusion on consequential
damages which shall apply in all instances, the
exclusions set forth in the previous sentence shall
not apply in cases of personal injury or property
damage arising as a result of defect or
non-conformity of the Product.
15
<PAGE>
b. SOFTWARE.
(i) CPS hereby warrants that it has the right to grant
licenses of the Software required for the sale,
distribution and use of the Products. CPS also
warrants that during the Warranty Term, all the CPS
Software shall, using commercially reasonable efforts
to follow industry standard practices: (i) be free
from defects in design/workmanship; (ii) be
reasonably error free and (ii) conform to the written
specifications provided with the Software delivered
to Distributor. With respect to Software that is
provided by CPS to Distributor independently from the
Products for use with or in connection with the
Products, such Software will be warranted for a
period of twelve (12) months from the delivery of
such Software in connection with the sale of
Products. In the event that during the Warranty Term,
a defect or bug is detected in such Software provided
by CPS, CPS will use its best efforts to correct same
and shall provide, free of charge, revised, repaired
or replacement Software to Distributor. CPS and
Distributor acknowledge the requirement for ongoing
maintenance and support for the CPS Software is an
integral part of this Agreement. CPS makes no
warranty with respect to Third Party Software, and
Distributors' sole warranty therefor, if any, is the
original warranty provided by the developer of such
Third Party Software, which CPS agrees to pass on to
Distributor. To the extent applicable to this
Agreement, the software licensed by Distributor to
CPS shall be governed by the term of a separate
license agreement.
(ii) CPS expressly warrants that to its knowledge no
portion of the CPS Software contains or will contain
any protection features designed to prevent its use.
This includes, without limitation, any computer
virus, worm, software lock, drop dead device,
trojan-horse routine, trap door, time bomb or any
other codes or instructions that may be used to
access, modify, delete, damage or disable the
software on the products, workstations or computer
systems or those of Distributor's customers.
c. DOCUMENTATION. If documentation or other information provided
by CPS pursuant to the terms of this Agreement are incorrect
or incomplete, CPS shall correct or make complete such
documentation or information, and shall provide Distributor,
free of charge, with the necessary copies of the corrected or
completed versions of such documentation or information for
distribution by Distributor to its customers. If Distributor
discovers that any documentation or information provided by it
is incorrect or incomplete, Distributor shall remedy such
situation, at Distributor's cost.
d. CUSTOMER WARRANTIES. Distributor shall be solely responsible
for any representations or warranty made by Distributor to any
of its customers that conflict with the provisions of this
Agreement, including, without limitation, the disclaimers of
warranty set forth in Section 7(e).
16
<PAGE>
e. DISCLAIMER. CPS makes no warranty with respect to the Products
other than the ones set forth in this Section 7 OR THAT WHICH
MAY BE PROVIDED IN A SEPARATE WARRANTY COVERING THE APPLICABLE
PRODUCT. The Warranty provided in this Section 7 OR THAT WHICH
MAY BE PROVIDED IN A SEPARATE WARRANTY COVERING THE APPLICABLE
PRODUCT is in lieu of all other warranties, express or
implied, including but not limited to any express or implied
warranties of merchantability or fitness for a particular
purpose, and constitutes the only warranty made with respect
to the Products.
f. LIMITATIONS. The warranty provided in this Section 7 shall be
void for any Product, which is misused, abused, neglected,
tampered with, damaged by accident, fire, or other peril or
serviced by unauthorized personnel. For purposes of this
Section 7(f), "unauthorized personnel" shall mean persons
other than a CPS certified employee, an employee of
Distributor trained by a certified CPS employee or a person
trained through a Distributor training program that has been
certified by CPS. If a Product is repackaged by Distributor or
any of its agents (other than CPS) and the Product is damaged
in transit as a result of such repackaging, the warranty in
this Section 7 shall be void. If a Product is used with
calibration sources that are not approved by CPS and which do
not meet the specifications set forth on EXHIBIT I, the
warranty provided in this Section 7 shall be void.
8. INSTALLATION, SERVICE AND TRAINING.
a. EXTENDED SERVICE OPTION. Distributor shall have the option of
contracting with CPS for CPS to provide installation and
one-year warranty service. If Distributor desires that CPS
provides such installation and one-year warranty service to
Distributor's customers in CPS's existing service coverage
area, which shall be established from time to time by CPS,
Distributor shall pay CPS the amounts set forth on EXHIBIT G
hereto, which are exclusive of and will not be reduced by any
discounts or allowances. The service warranty amounts set
forth on EXHIBIT G shall be paid by Distributor fifteen (15)
days following the date the applicable Product is delivered to
Distributor; provided, that if Distributor does not contract
with CPS to provide the installation and warranty service
until after the applicable Product is delivered, Distributor
shall pay CPS the service warranty amounts set forth on
EXHIBIT G fifteen (15) days following the execution of an
agreement by CPS to provide the installation and warranty
service. The payments for installation services shall be made
fifteen (15) days following the date the installation services
17
<PAGE>
are completed. The scope and specifications of the
installation and one year warranty labor, which CPS would
provide to Distributor, are set forth on EXHIBIT G hereto. If
Distributor elects to purchase the installation and one year
warranty service provided for in this paragraph, then
Distributor shall not receive a Warranty Discount on the
purchase of such Product.
b. SPARE AND REPLACEMENT PARTS. CPS shall, based on its
experience, provide Distributor with a recommended list of
spare and replacement parts, such parts to be listed in
EXHIBIT H. For a period of ten (10) years from the date of the
last delivery of Products under this Agreement, CPS shall make
available a source of supply of spare and replacement parts
and accessories (excluding items consumed through normal daily
use such as magnetic media) to permit repair and maintenance
of the Products sold by Distributor. CPS shall fill
Distributor's orders for spare and replacement parts and shall
ship the same to Distributor within the later of thirty (30)
days of receiving Distributor's order or the noted lead time
on EXHIBIT H. In the event Distributor specifies that any
order, or any part thereof, is a "rush" order, CPS shall
exercise its commercially reasonable efforts to fill such
order within 24 hours of receiving the same. CPS service
personnel shall be available to assist Distributor in the
field at Distributor's customer's facility at CPS's usual and
customary charge which shall be established from time to time
by CPS in its sole discretion. The actual spare parts list for
CPS is shown as EXHIBIT H to this Agreement. The List Prices
for the spare parts which are set forth on EXHIBIT H may be
changed by CPS, either up or down, in its sole discretion, but
no more frequently than once every *. The Transfer Price for
spare parts shall be the List Price for such spare parts on
the date it is ordered times * -percent ( * %). The * percent
( * %) transfer price discount on spare parts may be adjusted
by CPS in accordance with Section 5(c) hereof. Also, included
in EXHIBIT H is a list of repairable parts that CPS is willing
to buy back from Distributor, at the prices set forth on such
EXHIBIT H. Payment terms for spare parts and repairable parts
are net thirty (30) days with shipment.
c. INSTALLATION TRAINING. CPS shall train Distributor's
technicians at CPS's location in the installation and
servicing of the Products. CPS shall provide training for nine
(9) of Distributor's technicians at no charge for existing,
new or substantially modified Products. Any installation and
servicing training beyond that shall be paid for by
Distributor at the then prevailing rate charged by CPS for
similar training, plus CPS's reasonable travel and related
expenses. CPS agrees to provide, all necessary technical
documentation, software, know-how, installation tools or other
information necessary to enable Distributor to install,
service and maintain the Products. The cost for such
additional installation and services shall be established by
CPS in its sole discretion from time to time.
* Omitted information is the subject of a request for confidential
treatment pursuant to Rule 406 under the Securities Act of 1933 and has been
filed separately with the Securities and Exchange Commission.
18
<PAGE>
d. TECHNICAL SUPPORT. In the event Distributor is unable to
resolve Product performance issues by using the internal
resources of Distributor, CPS will accept and respond to
technical support calls from Distributor, to the extent same
are related to the resolution of Product performance issues.
Response time and/or call back time from CPS to Distributor
shall not exceed four (4) hours from the time the call for
assistance is received, provided such call is received prior
to the close of CPS' technical support department; if the call
is received after the close of business of CPS' technical
support department, the call shall be returned within two (2)
hours of the commencement of the next regular business day.
For the purposes of this Agreement, CPS's normal business
hours are defined as Monday through Friday, 8 A.M. to 5 P.M
eastern time. There shall be no charge by CPS to Distributor
for telephone assistance. In the event telephone response is
not successful, CPS will send a representative to the customer
site where the Product is located to resolve the performance
issue. Response time for on-site assistance shall not exceed
seven (7) calendar days per incident. CPS shall charge its
then prevailing rates for providing on site services. A copy
of CPS's current prevailing service rates, which may be
increased by CPS in its sole discretion, are set forth on
EXHIBIT G hereto.
e. APPLICATIONS TRAINING. Distributor shall provide applications
training to end users for all the customer sites during
installation. CPS will provide the necessary training, free of
charge (except Distributor will be responsible for its
employees travel and related expenses), at CPS's location for
four of Distributor's applications specialists to enable
Distributor to comply with this responsibility. CPS agrees to
provide, all necessary technical documentation, software,
know-how or other information necessary to enable Distributor
to train its application specialists. CPS shall provide
additional update training at no cost for four of
Distributor's Applications Specialists for major Product
changes or new product applications (except Distributor will
be responsible for its employees travel and related expenses).
Except as set forth above, all additional applications
training for Distributor's applications specialists shall be
paid for by Distributor at CPS's then prevailing rate, plus
reasonable travel and related expenses incurred by CPS's
employees.
f. APPLICATION SUPPORT. In the event Distributor is unable to
resolve Product performance issues through its own resources,
CPS will accept Applications Support calls from Distributor,
with the goal of resolving any Product performance issue.
Response time or call back time from CPS shall not exceed four
(4) hours from Distributor's call to CPS requesting
assistance, provided such call is received prior to the close
of CPS's technical support department; if the call is received
after the close of business of CPS's technical support
department, the call shall be
19
<PAGE>
returned within two (2) of the commencement of the next
regular business day. For the purposes of this Agreement, CPS'
normal business hours shall be defined as Monday through
Friday, 8 A.M. to 5 P.M eastern time. There shall be no charge
by CPS to Distributor for telephone assistance. In the event
telephone assistance is not adequate to resolve the Product
performance issues, CPS will arrange to have a representative
travel to the customer's site to resolve the performance
issue. Response time by CPS for on-site assistance will not
exceed seven (7) calendar days per incident. CPS will charge
its then prevailing rates for providing on site services.
CPS's current prevailing service rates, which may me increased
by CPS in its sole discretion, are set forth on EXHIBIT G
hereto.
g. TECHNICAL AND SALES LITERATURE. CPS shall provide Distributor,
* , in the English, Spanish and German languages, quantities
not to exceed 200 of each per calendar year, of CPS designed
and labeled technical sales literature, catalogs, and
brochures in hard copy format and CD's containing the
electronic file of each document which Distributor will
utilize for the purposes of developing its own commercial
custom marketing and sales materials. Distributor is
authorized to have such materials translated into other
languages at its expense and to include Distributor's
trademarks, trade dress and other attributable intellectual
property notices; provided, however, that the overall quality
and design of such material shall be generally consistent with
the design and quality of the original English version and
Distributor will indemnify CPS for losses resulting from any
inaccurate translation of such materials. Distributor agrees
to affix CPS's copyright notice on each such translation and
production costs for such translations shall be borne by
Distributor. CPS hereby grants Distributor the right to copy,
modify, display and distribute all such materials for purposes
of supporting Distributors marketing and sales efforts. All
brochures, technical sales literature or other written work
created or used by Distributor in connection with the sale or
distribution of the Products must contain the following
reference to CPS as the manufacturer of the Products:
"The PET products described herein are developed and
manufactured by CPS Innovations, a market leader in
PET products, systems and solutions. CPS is
headquartered in Knoxville, Tennessee and is a joint
venture between Siemens Medical Solutions USA, Inc.
and CTI, Inc."
Any change to such reference to CPS must be pre-approved by
the President or Chief Financial Officer of CPS.
* Omitted information is the subject of a request for confidential treatment
pursuant to Rule 406 under the Securities Act of 1933 and has been filed
separately with the Securities and Exchange Commission.
20
<PAGE>
h. PRESS RELEASES, ADVERTISEMENTS AND TRADE SHOW PANELS.
Distributor agrees to include a reference to CPS as the
developer and manufacturer of the Products in any press
release, advertisement, trade show panel or other marketing
material that it creates or uses in connection with any
promotions, marketing or public dissemination of information
related to the Products or the clinical outcomes or medical
advances attributed to the Products. Any such press release or
advertisement will also include the description of CPS
referenced in paragraph (g) above. Distributor agrees that any
change to such reference must be pre-approved by the President
or Chief Financial Officer of CPS.
i. MODEL UNITS. CPS agrees to provide Distributor one fully
operative ECAT demonstration unit for training, reference,
research, development, demonstration and other purposes at a
price equal to * percent ( * %) of the List Price for such
unit. Should new generations of existing Products or
additional Products be added to this Agreement, then
Distributor shall have the right to request an additional
model unit from the new generation of existing Products or
from the additional Products under the same terms and
conditions set forth in this subsection (h).
* Omitted information is the subject of a request for confidential treatment
pursuant to Rule 406 under the Securities Act of 1933 and has been filed
separately with the Securities and Exchange Commission.
21
<PAGE>
9. GOVERNMENT REGULATIONS, PRODUCT COMPLAINTS, RECALLS.
a. COMPLIANCE WITH LAWS. CPS shall comply with all laws and
regulations of all applicable jurisdictions relating to the
manufacture of the Products. The responsibilities of CPS shall
include, but shall not be limited to, compliance with U. S.
Food and Drug Administration ("FDA") regulations and, as
appropriate, the European Medical Device Directive ("EMDD"),
together referred to as the "Regulations." Distributor shall
comply with the Regulations that relate to its marketing,
distribution, sale and service of the Products including,
without limitation, all import and export laws. In addition,
CPS agrees that if any Product is found to be in violation of
any applicable law or regulation, requiring either a recall or
retrofit to such Product, CPS shall be solely responsible for
the necessary repair, replacement or other remedy, at CPS'
sole cost, including, without limitation, any fines or charges
imposed upon Distributor arising therefrom. Distributor will
cooperate with CPS in the performance of CPS's
responsibilities hereunder, to the extent applicable or
appropriate, and Distributor will be reimbursed for all
extraordinary costs incurred should its cooperation require
outlay of funds or personnel, or occur outside the scope of
Distributor's next scheduled service call at the site
affected.
b. PRODUCT COMPLAINT PROCEDURES. CPS, through its Quality and
Regulatory Affairs shall act as the Complaint Handling Unit
for all complaints pertaining to CPS Products. Complaints
shall be defined in accordance with the FDA definition
contained within the Quality Systems Regulation or its
successors. Distributor agrees to provide all complaints, in
written English, to CPS in a timely manner. Submitted
complaints shall provide sufficient detail to permit CPS to
adequately investigate the reported problem. Complaints
pertaining to injury or death shall be reported to CPS in five
(5) working days or less of Distributor's receipt of such
complaint so that FDA Medical Device Reporting requirements
can be fulfilled. CPS agrees to acknowledge receipt of
complaints in a timely manner, to provide status updates upon
request, and to provide notification to the submitter upon
closure. When requested, Distributor shall provide evaluation
and investigation support to the Complaint Handling Unit. The
servicing party is responsible for analysis of service
reports, service repair data, service trends, and telephone
support for potential complaints or corrective action
requirements, in accordance with Regulations. Distributor
agrees to return parts involved in a complaint in less than
sixty (60) days, upon request from CPS and at CPS's sole
expense.
22
<PAGE>
c. MANDATORY MODIFICATION OR RECALL.
(i) In the event a modification of any Product is
mandated by applicable regulatory agencies or by law,
or if CPS reasonably believes recall of or
modification or change to any Product is required or
advisable due to (i) safety or performance issues
relating to the Product, or (ii) recurring failure in
or high incidence of repairs to or replacements of, a
Product, or any part or component thereof, CPS shall
promptly notify Distributor thereof in writing.
(ii) In the event Distributor reasonably believes recall
of or modification or change to any Product is
required or advisable due to (i) safety or
performance issues relating to the Product or (ii)
recurring failure in or high incidence of repairs to
or replacements of a Product, or any part or
component thereof, Distributor shall promptly notify
CPS thereof in writing.
(iii) In the case described in section c(i) above, CPS
shall, at no charge to Distributor, promptly provide
Distributor with all available information for the
necessary or required modification or change to the
Product, including, but not limited to, the reasons
for the necessary or required change or modification,
and the serial number of the Product(s) affected. CPS
shall, at its option either (i) modify or change the
affected Product(s) or (ii) supply to Distributors
(or to customers of Distributor) modified or changed
Products or the parts or components required to make
such change or modification, together with all
necessary field modification instructions. If the
nature of the necessary change or modification does
not require immediate implementation, and can wait
until the next normally scheduled service call, then
Distributor shall undertake the modification of or
change to the Products with the parts or components,
and in accordance with the field modification
instructions, provided by CPS to Distributor. CPS
shall reimburse Distributor for labor costs of $ *
for the factory recommended total hours for each such
change or modification reported as complete by the
factory. If after the time limits set forth in the
field modification instruction, the change or
modification is not complete, CPS can, at its option,
contact end customers directly to inform them of the
required changes. Notwithstanding the foregoing, a
mandatory modification or recall with respect to a CT
incorporated into a PET/CT shall be governed and
controlled by Section 7.3.2 of the Business Partner
Agreement and Distributor agrees to comply with the
obligations set forth therein.
* Omitted information is the subject of a request for confidential treatment
pursuant to Rule 406 under the Securities Act of 1933 and has been filed
separately with the Securities and Exchange Commission.
23
<PAGE>
(iv) In the case described in section c(ii) above, CPS and
Distributor shall exchange relevant information and
determine, in good faith, whether a mandatory
modification or recall is warranted. If as a result
of such discussion, CPS concludes that a mandatory
modification or recall is advisable, CPS shall
proceed in accordance with, and have the obligations
set forth in, section c(iii) above.
(v) For the purposes of this Agreement, the terms
"recurring failure" and "high incidence" shall mean
that at least five (5) times during any consecutive
thirty (30) day period the same failure or deficiency
is detected with respect to any individual Product
delivered to Distributor by CPS, with the
understanding and agreement of the parties that this
definition is for initial consideration only, and not
an absolute standard. The parties agree that they
will, in good faith, evaluate each such incidence of
alleged recurring failure or high incidence on a
case-by-case basis, and all aspects of the alleged
failure or deficiency, including, without limitation,
the impact such incidence has at the customer's
facility. Distributor agrees to provide written
copies of all complaints alleging recurring failure
or high incidence to CPS as set forth in section 9(b)
above.
d. DISTRIBUTOR'S AUDIT RIGHTS. CPS warrants and represents that
each of the Products has received all requisite clearances
from the U.S. Food and Drug Administration, such as that
prescribed in 21 CFR Part 807, Subpart E - Premarket
Notification Procedures, and have been designed, manufactured
and distributed in accordance with 21 CFR Part 820-Quality
System Regulation and ISO-9001. CPS grants Distributor the
right, upon reasonable prior notice, to audit Seller's quality
system against the Quality System Regulations and ISO-9001.
Distributor shall have the right to conduct this audit not
more than once per year unless the results of a prior audit
indicate significant non-conformances, the correction of which
may be verified by re-audit. Significant non-conformances must
be identified by Distributor as soon as reasonably practicable
following the completion of an audit and must be mutually
agreed to by the parties prior to the performance of a
re-audit.
10. INTELLECTUAL PROPERTY RIGHTS.
a. DISTRIBUTOR'S RIGHTS AND OBLIGATIONS. Distributor agrees that
it neither owns nor hereby acquires any claim or right of
ownership to the Products, Technology and Software or to any
related patents, copyrights, trademarks or other intellectual
property belonging to CPS. CPS and its suppliers and licensors
reserve all rights not expressly granted to Distributor. CPS's
suppliers and licensors are the intended third party
beneficiaries of this Agreement and have the express right to
24
<PAGE>
rely upon and directly enforce the terms set forth herein, but
only to the extent of their rights with respect to CPS.
Distributor further agrees it will not copy or modify the
Software except as permitted in Section 10(c) or elsewhere in
this Agreement and it will not in any way reverse engineer,
disassemble or decompile the Software or any portion thereof.
Distributor shall inform CPS promptly if Distributor becomes
aware (i) that any Customer is using any Product in violation
of the applicable Customer Sales Agreement; and (ii) that any
third party is infringing or violating CPS's proprietary
rights related to the Product. In the event any Customer is in
violation of the terms of the applicable Customer Sales
Agreement set forth in EXHIBIT C hereto, Distributor agrees,
at the request of CPS, to use commercially reasonable efforts
to enforce Distributor's rights under the Customer Sales
Agreement on behalf of CPS. Upon termination of this
Agreement, Distributor shall cease and desist from making
further use of any and all materials, including signs,
advertising matter and catalogues, containing trademarks or
trade names of CPS.
b. REBADGING. CPS shall provide Distributor the Products to
market and distribute under Distributor's trademarks, service
marks, logos, trade names, labels and/or other marks
(hereinafter referred to as "Rebadging"). In addition to those
provisions elsewhere in this Agreement, Rebadging shall be
subject to all of the following terms and conditions:
(i) To the extent not included in the net Transfer Price,
Distributor shall reimburse CPS for the cost of
Rebadging; and
(ii) Distributor shall indemnify and hold CPS harmless
from and against any and all infringement claims of
third parties arising directly or indirectly from, as
a result of, in connection with, or relating to the
Rebadging of the Products at the request of
Distributor, as well as the costs, including
attorneys' fees, of defending against them.
Distributor shall not knowingly take any action, which would,
or knowingly fail to take any action where such failure would,
directly or indirectly, have a known adverse effect upon the
trademarks or goodwill of CPS. Unless authorized, Distributor
will not use any trademark or trade name of CPS, nor use any
word, mark, symbol, or name which may lead to confusion in the
marketplace with goods marketed by CPS under its distinct
words, mark, symbols, trademarks and trade names. Unless
authorized, CPS will not use any trademark or trade name of
Distributor, nor use any word, mark, symbol, or name that may
lead to confusion in the marketplace with goods marketed by
Distributor under its distinct words, mark, symbols,
trademarks and trade names. Each party agrees that the
trademarks adopted by the other party for use on the Products
shall be owned by such other party and shall not be used
except as provided above. During the term of this Agreement,
Distributor shall have the right to indicate
25
<PAGE>
to the public that it is an authorized distributor of the
Products in the Territory, but shall not make any other use of
CPS's trademarks and trade names except as expressly
authorized by CPS. Distributor shall not make any
representations or statements regarding the Products, other
than those contained in the marketing literature and
promotional materials provided to Distributor by CPS, without
the prior written approval of CPS; provided, that Distributor
may include additional representations or statements regarding
any modifications, enhancements or add-ons created by
Distributor. Upon notice from CPS of reasonable objections
regarding marketing literature and promotional materials,
Distributor shall discontinue use of any marketing literature
or promotional materials that the parties mutually agree are
no longer acceptable.
c. ADDITIONAL SOFTWARE APPLICATIONS. The parties recognize and
agree that CPS or Distributor may desire to independently
develop or co-develop additional software applications to be
used with the Products. The parties acknowledge that these
additional software applications are intended to be
stand-alone applications that do not require modifications of
the source code or software used in connection with the
operation of the Products (the "Applications"). In order to
create these Applications, CPS shall provide Distributor with
its Clinical Applications Program Platform and shall
reasonably train up to two (2) of Distributor's employees on
the use thereof. In addition, CPS acknowledges and agrees that
circumstances may arise where, in order to create these
Applications, Distributor may need the source code for the
Clinical Applications Program Platform or for CPS's other
proprietary software (the "Source Code"). In such event, the
parties shall mutually agree on the terms under which the
Source Code shall be provided to Distributor. Any Applications
independently developed by Distributor or by CPS in a work for
hire arrangement for the benefit of Distributor, shall be
owned by Distributor. The ownership of any Applications,
co-developed by the parties shall be agreed upon by the
parties. The Applications developed by CPS, other than through
a work-for hire arrangement for the benefit of Distributor,
shall be owned by CPS.
d. GOVERNMENT AGENCIES. In the event Distributor distributes any
of the Products to a governmental agency or to any Customer
that may acquire them pursuant to a government contract or
with government funds, Distributor will use commercially
reasonable efforts to ensure that CPS's rights in and to the
Products are protected to the maximum extent possible, and
take all actions reasonably necessary to protect CPS's rights
and interest in the Products in accordance with applicable
laws and regulations, including, but not limited to, the
placement of appropriate legends or restrictions.
26
<PAGE>
11. INTELLECTUAL PROPERTY INDEMNITY.
a. INDEMNIFICATION OBLIGATIONS. CPS shall defend any claim, suit,
action or proceeding threatened, brought, or asserted against
Distributor or any of Distributor's parents, subsidiaries,
affiliates, shareholders, directors, officers, employees,
agents, authorized sub-distributors, representatives,
customers, end users, licensees, permitted assignees, and
attorneys (hereinafter "Indemnitee(s)") insofar as any claim,
suit, action, or proceeding is based on a claim that any
Product, or any component or part thereof, provided by CPS
under this Agreement (excluding the Distributor Software),
constitutes infringement of any patent, copyright or trade
secret of a third party based on the laws of any country
within the Territory, and CPS shall indemnify the
Indemnitee(s) for any and all royalties, damages, judgments,
losses, liabilities, claims, expenses (including attorney
fees), and costs finally awarded against any such Indemnitee,
including any settlement approved by CPS, but only if: (a)
Distributor or any Indemnitee complies with Section 11(b)
hereof; (b) CPS has sole control over the defense of the
claim, suit, action or proceeding and any negotiation for its
settlement or compromise; and (c) Indemnitee takes no action
that, prejudices CPS's defense of the claim, suit, action or
proceeding. CPS shall have no obligation to indemnify or
defend any claim based upon the misuse of the Product, a
modification of the Product not approved by or for CPS, or the
unauthorized combination of the Product with other products,
services or items not approved by CPS to the extent such claim
would not have been made absent such combination. Distributor
shall defend and indemnify CPS from any claims that result
from Distributor's modification or combination of the Product.
CPS hereby represents and warrants that, to the best of its
knowledge, there are with respect to Products, no infringement
actions, suits, investigations, claims or proceedings pending
or threatened against CPS as of the date of this Agreement.
b. NOTICE AND ASSISTANCE. Distributor (or any Indemnitee) shall
notify CPS in writing within a reasonable time after
initiation or threat of any claim, suit, action or legal
proceeding described in Section 11(a). To the extent
Distributor is not legally prohibited, Distributor shall
provide CPS with information and assistance reasonably
necessary to defend or settle any claim, suit, or proceeding,
with allocation of expense incurred by Distributor in
providing such assistance to be negotiated in good faith and
mutually agreed to by Distributor and CPS on a case by case
basis. Upon receipt of any notice given hereunder, CPS shall
assume promptly the full responsibility for any defense of any
claim, suit, action, or proceeding, threatened, brought, or
asserted against any Indemnitee as described in Section 11(a).
27
<PAGE>
c. SELECTION OF COUNSEL. CPS agrees to consult with each
Indemnitee prior to selecting counsel for the purpose of
discharging CPS's duties under this Section 11. CPS agrees to
engage in such consultation in good faith, to give due
consideration in good faith to the comments of each
Indemnitee, and to refrain from engaging any counsel (either
law firm or individual attorney) who has or may have any
conflict with any Indemnitee as identified by the Indemnitee.
Each Indemnitee hereunder reserves and shall have the right to
be represented by and to participate actively through his or
her own counsel as co-counsel in any suit, action, or
proceeding identified in this Section 11, all at his or her
own cost, provided that CPS retains sole control of the
defense.
d. SETTLEMENT. Distributor (and every Indemnitee hereunder) shall
receive timely notification of any settlement agreement
relating to claims of infringement prior to the execution
thereof. No such settlement agreement shall include any term
or condition which would restrict, delimit, impair, or
otherwise affect any rights which Distributor (or any
Indemnitee) otherwise may enjoy without first receiving the
prior written consent of Distributor (or such Indemnitee)
specifically agreeing to such restriction, limitation,
impairment, or other effect. CPS shall not be responsible for
any compromise executed by Distributor or any of Distributor's
agents without CPS's consent.
e. DETERMINATION OF INFRINGEMENT. In the event the sale or use of
any Products shall be found to constitute infringement of any
letters patent, copyright, trademark or trade secret of a
third party, and such sale or use is enjoined, or if CPS
wishes to minimize its liability hereunder, CPS, at its
option, shall pursue one or more of the following courses of
action within a reasonable time:
(i) secure a termination or stay of any such
injunction; or
(ii) secure a license from the party claiming
infringement; or
(iii) modify the Products at CPS's cost so such
Products become non-infringing; or
(iv) secure for the benefit of Distributor and
Distributor's customers and end users such goods,
processes, or services as shall not infringe any
patent, copyright, trademark or trade secret; or
(v) if none of the foregoing is reasonably feasible,
accept a return of the Products which are subject to
the injunction and refund to Distributor the net
Transfer Price paid by Distributor to CPS for those
Products which are returned, less reasonable
depreciation, or such greater amount as is imposed by
a court.
28
<PAGE>
If CPS elects to modify any Product so it becomes
non-infringing, such modification(s) shall not have any
material or adverse effect on the performance capabilities of
such Product without such modification(s). In the event CPS
fails to achieve at least one of the foregoing objectives
within a reasonable time, Distributor may terminate this
Agreement and all payment obligations relating to infringing
Products that are returned to CPS shall thereupon abate.
f. LIABILITY LIMITS. THIS SECTION 11 STATES CPS'S SOLE AND
EXCLUSIVE OBLIGATION TO DISTRIBUTOR REGARDING ANY ACTUAL OR
ALLEGED INFRINGEMENT, VIOLATION OR MISAPPROPRIATION OF ANY
THIRD PARTY'S PATENT, COPYRIGHT, TRADE SECRET OR OTHER
PROPRIETARY RIGHTS RELATING TO THE PRODUCT, AND ANY WARRANTIES
OF NONINFRINGEMENT ARE HEREBY DISCLAIMED.
12. INDEMNIFICATION.
a. INDEMNIFICATION BY DISTRIBUTORS. Distributor agrees to
indemnify, to defend and to hold harmless CPS from and against
all claims, damages, demands and expenses (including court
costs, reasonable attorney's fees and any amounts paid in
settlement or pursuant to a final judgment) arising out of any
third party claims, but only to the extent to which such
claims, damages, demands and expenses (i) are proximately
caused by the fault or negligence of Distributor, its
officers, employees or agents; (ii) relate to any customer
disputes or claims relating to the marketing, sale,
distribution, installation, training or service of any Product
by Distributor, whether arising out of express or implied
warranty, but only to the extent that such claim does not
arise from the unauthorized act or representation by CPS or
its officers, employees or agents, unless such representation
was made by Distributor to CPS; (iii) relate to any other
failure by Distributor to comply with any express or implied
terms of any contract of sale by Distributor for the Products;
(iv) relate to any failure by Distributor to comply with
applicable laws and/or regulations in accordance with this
Agreement; or (v) relate to any and all violations of export
laws and or regulations of any country or region in the
Territory.
b. INDEMNIFICATION BY CPS. CPS agrees to indemnify, to defend and
to hold harmless Distributor from and against all claims,
damages, demands and expenses (including court costs,
reasonable attorney's fees and any amounts paid in settlement
or pursuant to a final judgment) arising out of any third
party claims, but only to the extent to which such claims,
damages, demands and expenses (i) are proximately caused by
the fault or negligence of CPS, its officers, employees or
29
<PAGE>
agents; (ii) relate to any customer disputes or claims
relating to the manufacture, workmanship, or design of any
Product, or the installation, or service of any Product
performed by CPS, but only to the extent that such claim does
not arise from an unauthorized act or representation by
Distributor or its officers, employees or agents, unless such
representation was first made by CPS to Distributor; (iii)
relate to any other failure by CPS to comply with any the
terms of any contract of sale by CPS of Products relating to
this Agreement, or (iv) relate to any failure by CPS to comply
with applicable laws and/or regulations in accordance with
this Agreement. Notwithstanding the foregoing, CPS shall have
no obligation to indemnify, defend or hold harmless
Distributor with respect to any claims, damages, demands or
expenses arising out of or related to the CT incorporated into
the PET/CT.
c. INDEMNIFICATION PROCEDURES.
i. Any party entitled to indemnification in this Section
12 (the "Indemnitee") must provide written notice
(the "Claim Notice") to the party obligated to
provide indemnification (the "Indemnitor") with
respect to any claim, suit or proceeding initiated
against the Indemnitee by a party other than the
Indemnitor ("Third Party Claim"). All Claim Notices
must be delivered promptly, but in no event more than
thirty days (the "Notice Period") following (i) the
receipt of actual notice of the Third party Claim by
any officer, director or employee of Indemnitee, or
(ii) the happening of circumstances that any officer,
director or employee of Indemnitee believes or should
reasonably believes could give rise to the Third
Party Claim. The failure of Indemnitee to notify
Indemnitor within the Notice Period shall not relieve
Indemnitor of any liability with respect to the Third
Party Claim, except to the extent the Indemnitor
demonstrates that the defense of the Third Party
Claim is prejudiced by such failure. The Claim Notice
should state in reasonable detail the facts giving
rise to the Third Party Claim and Indemnitee's
intention to seek indemnification for the Third Party
Claim.
ii. Upon receipt of a Claim Notice from the Indemnitee
with respect to any Third Party Claim, the
Indemnitor, may assume the defense of the claim with
counsel reasonably satisfactory to the Indemnitee,
and the Indemnitee shall cooperate with the
Indemnitor (including, without limitation, allowing
and directing its employees to serve as witnesses and
otherwise render such assistance as the Indemnitor
may reasonably request) in such defense and related
negotiations (including settlement negotiations). If
the Indemnitor elects to control the defense of a
Third Party Claim, the Indemnitee
30
<PAGE>
shall have the right to employ separate counsel in
any action or claim and to participate in its
defense, provided that the fees and expenses of
counsel employed by Indemnitee shall be at the
expense of Indemnitee. If Indemnitor assumes the
defense of a Third Party Claim no compromise or
settlement may be effected by the Indemnitor without
the Indemnitee's consent unless (i) there is no
finding or admission of any violation of law or any
violation of the rights of any person by Indemnitee,
(ii) there is no effect on any other claim that may
be made against Indemnitee, (iii) the sole relief
provided is monetary damages that are paid in full by
Indemnitor, and (iv) the compromise or settlement
contains, as an unconditional term thereof, the
giving by the claimant or the plaintiff of the
Indemnitee a release from all liability in respect of
such Third Party Claim. The Indemnitee shall have no
liability with respect to any compromise or
settlement thereof effected without its consent.
iii. If the Indemnitor does not notify the Indemnitee
within fifteen (15) days after receipt of the Claim
Notice that it elects to undertake the defense of a
Third Party Claim, the Indemnitee shall have the
right to defend the claim, at the expense of
Indemnitor, with counsel of Indemnitee's choosing. No
settlement of a claim defended by Indemnitee pursuant
to this Section shall be made without the prior
written consent of Indemnitor, which consent shall
not be unreasonably withheld. Failure of Indemnitor
to reject a settlement within ten (10) days of
receipt thereof shall be deemed an acceptance of such
settlement.
iv. If an Indemnitee has a claim against an Indemnitor
that does not involve a Third Party Claim, the
Indemnitee shall notify the Indemnitor with
reasonable promptness of its claim, specifying the
nature of and specific basis for such claim and the
estimated amount of such claim. If Indemnitor elects
to satisfy the claim the Indemnitor shall remit
payment for the amount of the claim to the Indemnitee
upon receipt of an invoice therefore. If the
Indemnitor elects to dispute either the basis of the
claim or the amount of the claim, Indemnitor shall
promptly provide written notice to Indemnitee setting
forth the basis for its dispute. In the event of a
dispute, the Indemnitor and Indemnitee shall proceed
in good faith to negotiate a resolution of such
dispute, and if not resolved through good faith
negotiation, the dispute shall be resolved in
accordance with the arbitration procedures set forth
in Section 17 hereof unless the claim results from a
breach of Section 15 or the infringement by
Distributor of CPS's Technology or Software.
31
<PAGE>
d. LIMITATION OF DAMAGES. NEITHER PARTY SHALL BE LIABLE TO THE
OTHER PARTY FOR LOSS OF ANTICIPATED PROFITS, OR FOR ANY
INDIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL OR PUNITIVE
DAMAGES ARISING OUT OF THIS AGREEMENT OR THE SALE OR USE OF
THE PRODUCTS.
e. LIMITATIONS OF LIABILITY. Notwithstanding any other provision
set forth in this Agreement, CPS's total liability to the
Indemnitees for any claim, suit, action, or proceeding arising
out of or related to this Agreement shall be limited to the
following amounts:
i. For any claim alleging that the Products,
including, without limitation, any
Technology or Software incorporated therein,
infringes on any patent, copyright
trademark, trade secret or other
intellectual property of a third party
("Infringement Claims"), CPS's total
liability to the Indemnitees shall be
limited to $1,000,000 per Infringement
Claim, but subject to a maximum amount for
all Infringement Claims combined equal to
$2,000,000; and
ii. For all other claims, CPS's total liability
to the Indemnitees shall be limited to
$1,000,000 per claim, but subject to a
maximum amount for all claims combined equal
to $2,000,000.
f. SOLE AND EXCLUSIVE REMEDIES. Except for (i) claims resulting
from alleged breaches of the confidentiality obligations set
forth herein or the infringement of CPS's Software or
Technology or Distributor's intellectual property; (ii) any
act of fraud or intentional misrepresentation, or (iii) any
claims resulting from the matters set forth in Section 11, the
indemnification obligations set forth in this Section 12
hereof shall be the exclusive remedy of the parties with
respect to any third party claim or controversy arising out of
or related to this Agreement. All claims for indemnification
shall be made within twenty-four (24) months from the date
that the subject liability arises or such claims shall be
irrevocably waived. The limitations on liability in Section 12
hereof shall not apply to any claims resulting from the
infringement of CPS's Software or Technology or Distributor's
intellectual property rights.
13. INSURANCE. Distributor and CPS each agrees to maintain during the term
hereof liability insurance for personal injury and property damage,
including products liability and contractual coverage, as set forth
herein. Coverage for personal injury shall be not less than One Million
Dollars ($1,000,000) aggregate annual liability. Coverage for property
damage shall be not less than Two Million Dollars ($2,000,000) per
occurrence. Distributor and CPS agree that all liability insurance
obtained by Distributor and CPS shall include CPS and Distributor as
named insured reasonably acceptable to Distributor and CPS. CPS
32
<PAGE>
and Distributor further agree, as a continuing obligation after the
term hereof, to maintain such insurance with no less than the coverage
specified above in full force and effect for the full life of the
Products sold hereunder. CPS and Distributor shall supply each other
with a Certificate of Insurance upon written request by Distributor or
CPS.
14. SCOPE OF AUTHORITY. Each party hereto is an independent contractor
solely responsible for its own business and neither shall have any
power or authority to act for, to bind or to commit the other. CPS or
any third party with whom CPS has contracted, remains the exclusive
owner of all presently existing CPS proprietary rights including rights
based upon trade secret, trademark, patent and copyright laws with
respect to the Products, the Technology and the Software described
herein other than the Distributor Software. Neither party shall apply
for, or use or authorize the use of, in any way, the trademarks of the
other or any of its subsidiary or affiliated companies without written
permission of the other party. CPS and Distributor each represent and
warrant that they have full right and authority to enter into this
Agreement and grant the required licenses hereunder. CPS and
Distributor each represent and warrant that this Agreement does not
conflict with or violate any existing agreement entered into by CPS or
Distributor, as applicable. Neither party shall enter into any
agreement that will materially conflict with this Agreement or
materially and adversely impact the rights and interests of the other
party provided herein.
15. CONFIDENTIALITY. Each party hereto agrees not to disclose to others the
technical and business information of the other party hereto
("Confidential Information"), and agrees to use the other party's
Confidential Information only for the implementation of this Agreement
and to hold the other party's Confidential Information confidential
using at a minimum the same care it would exercise to protect its own
Confidential Information. The receiving party further agrees to
disclose the Confidential Information of the disclosing party only to
the receiving party's employees who have a need to know and only to
those employees who have agreed in writing to confidentiality
obligations substantially similar to those in this Section 15. The
receiving party shall not permit any of its personnel to remove any
proprietary or other legend or restrictive notice contained or included
in any Confidential Information provided by the disclosing party, and
the receiving party shall not permit any of its personnel to reproduce
or copy any such Confidential Information except as expressly
authorized under this Agreement. Provided, however, that such
confidentiality obligation shall not apply to any information which (a)
is now or hereafter becomes a part of the public domain, other than by
act or omission of the receiving party, (b) was independently developed
by the receiving party or its affiliates; (c) information that was in
such party's possession prior to disclosure by the other party, (d) is
hereafter furnished to the receiving party by a third party, as a
matter of right and without restriction on use or disclosure, who
lawfully possesses such information and did not acquire it directly or
indirectly from the other party, (e) is disclosed in any
33
<PAGE>
U.S. or foreign patent, or published patent application, whether owned
by the other party or any third party, or (f) is required to be
disclosed to a government agency or pursuant to a judicial proceeding,
but only to the extent so required and provided that the receiving
party gives the disclosing party advance notice of such disclosure and
reasonably cooperates with the disclosing party (at the disclosing
party's expense) to contest such disclosure.
34
<PAGE>
16. TERM AND TERMINATION.
a. TERM. The initial term of this Agreement shall be five (5)
years from the Effective Date (the "Initial Term") and shall
automatically be extended for additional one year (1) periods
unless terminated for cause. Either party may terminate this
Agreement without cause upon three (3) years prior written
notice delivered within ninety days (90) days of the
expiration of the then current term.
b. POST-TERMINATION OBLIGATIONS. In the event of termination of
this Agreement, CPS shall provide Distributor with software
and hardware upgrades and parts and components necessary for
Distributor to continue service to its customers for a period
of ten (10) years following the date of such termination. The
upgrades, parts and components shall be provided by CPS at
CPS's then prevailing prices, which prices will not exceed the
prices paid by CPS's other distributors based on comparable
volumes.
c. EXISTING PURCHASE ORDERS AND PAYMENT OBLIGATIONS. Termination
of this Agreement does not affect the requirement that CPS
ship and that Distributor accept and pay for any Product, that
was previously ordered prior to the termination date pursuant
to a binding purchase order between CPS and Distributor.
d. TERMINATION UPON BREACH. If either party hereto shall breach
this Agreement, the other party may give the defaulting party
written notice of such default. If the defaulting party shall
fail or refuse to remedy such default within ninety (90) days
from the date of said notice, this Agreement may be terminated
by a second written notice and said termination shall be
effective as of the date stated in the second notice of
default. Such termination shall be without prejudice to any
other rights or claims the aggrieved party may have against
the defaulting party. Defaults under this Agreement shall be
deemed to include, but shall not be limited to:
(i) material failure by either party to fulfill any of
its obligations under this Agreement;
(ii) an adjudication of bankruptcy of either party under
any bankruptcy or insolvency law; or
(iii) the commission by either party of a receiver for
business or property, or the making of any general
assignment for the benefit of creditors.
35
<PAGE>
e. TERMINATION FOR FAILURE TO PAY. If Distributor is in breach or
default of any of its payment obligations set forth in this
Agreement and such breach or default continues for ninety (90)
days or more after receipt of written notice thereof; CPS may,
by written notice to Distributor, terminate this Agreement
with such termination to be effective on the date of receipt
by Distributor of such termination notice; provided, however,
that any failure to pay on the part of Distributor caused by
the failure of Distributor to be paid by its customers due to
defective Products shall not be a breach or default of
Distributor's payments obligations unless (i) such breach or
default continues for a period of thirty (30) days after CPS
has rectified such defect and the Product(s) is accepted as
meeting the written specifications set forth in on EXHIBIT A
hereto by Distributor's customers, or (ii) the defect is the
result of actions taken by Distributor or its agents or
sub-distributors.
f. TERMINATION UPON A FORCE MAJEURE EVENT. If a Force Majeure
Event continues for a period of ninety (90) days, the parties
whose performance is not affected by the Force Majeure Event
may terminate that portion of this Agreement affected hereby
or, if such Force Majeure Event affects the critical
performance obligations hereunder, then the entirety of this
Agreement may be terminated by the party not so affected
immediately thereafter.
17. ARBITRATION. Except for claims resulting from alleged breaches of the
confidentiality obligations hereunder or the infringement of CPS's
Technology or Software, any controversy or claim arising out of or
relating to this Agreement, or the breach thereof, which can not be
settled by mutual agreement of the parties, in lieu of the institution
of legal proceedings by either party, shall be submitted to binding
arbitration as follows: Any party who is aggrieved shall deliver
written notice to the other party or parties setting forth the specific
points in dispute. Any points remaining in dispute twenty (20) days
after the giving of such notice shall be submitted to binding
arbitration in Atlanta, Georgia, to the American Arbitration
Association, before an arbitrator appointed from the members of the
National Panel of Arbitrators in accordance with the Expedited
Procedures of the Commercial Arbitration Rules of the American
Arbitration Association modified only as expressly provided herein.
After such twenty (20) day period, any party, upon ten (10) days
written notice to the other party may so submit the points in dispute
to arbitration. The arbitrator may submit a default judgement against
any party that fails to participate in the arbitration proceedings. The
arbitration decision shall be final, conclusive and binding and
judgment on such decision may be entered in any federal or state court
of competent jurisdiction. The arbitrator will be authorized to
apportion its fees and expenses and the reasonable attorney fees and
expenses of the parties as the arbitrator deems appropriate. In the
absence of any such apportionment, the fees and expenses of the
arbitrator shall be borne equally by each party, and each party shall
bear the
36
<PAGE>
fees and expenses of its own attorney. The parties agree that this
paragraph has been included to rapidly and inexpensively resolve any
disputes between them with respect to this Agreement (other than
breaches of the confidentiality provisions herein or infringement on
the intellectual property rights), that it contains the sole and
exclusive remedy (other than equitable remedies) of the parties with
respect to any disputes arising under this Agreement, and this
paragraph shall be grounds for dismissal of any court action commenced
by either party with respect to this Agreement, other than
post-arbitration actions seeking to enforce an arbitration award or any
court action seeking equitable relief. The parties shall keep
confidential, and shall not disclose to any person except as may be
required by law, the existence of any controversy hereunder, and
referral of any such controversy to arbitration or the status or
resolution thereof.
18. MISCELLANEOUS.
a. FORCE MAJEURE. Neither party hereto shall be liable for any
delay arising from circumstances beyond its control including
(but not limited to) acts of God, war, riot or civil
commotion, industrial dispute, fire, flood, drought, shortage
of material or labor or act of government ("Force Majeure
Events"), provided that the party seeking to be excused shall
make every reasonable effort to minimize the delay resulting
therefrom. Each party shall keep the other fully informed of
any such circumstances. The parties agree to resume their
performance under this Agreement as soon as possible upon the
passing of the Force Majeure condition.
b. AMENDMENTS; WAIVERS. Any amendment, supplement or modification
of or to any provision of this Agreement shall be effective
only if made in writing and signed by each of the parties to
this Agreement. Any waiver of any provision of this Agreement,
and any consent to any departure from the terms of any
provision of this Agreement, shall be effective (a) only if it
is made or given in writing and signed by each of the parties
to this Agreement, and (b) only in the specific instance and
for the specific purpose for which made or given.
c. SEVERABILITY. If any one or more of the provisions contained
herein, or the application thereof in any circumstance, is
held invalid, illegal or unenforceable in any respect for any
reason, the validity, legality and enforceability of any such
provision in every other respect and of the remaining
provisions hereof shall not be in any way impaired, unless the
provisions held invalid, illegal or unenforceable shall
substantially impair the benefits of the remaining provisions
hereof. In such event the parties hereto shall use their best
efforts to agree upon a replacement for such invalid or
unenforceable provision in terms which correspond as closely
as possible to the original provision.
37
<PAGE>
d. SUCCESSORS AND ASSIGNS. This Agreement shall inure to the
benefit of and be binding upon the successors and permitted
assigns of the parties hereto. No party to this Agreement may
assign any of its rights under this Agreement without the
prior written consent of the other parties; provided, that,
Distributor, subject to the terms of this Agreement, may
appoint subdistributors to distribute the Products upon ten
(10) days written notice to CPS. No person other than the
parties hereto and their successors and permitted assigns is
intended to be a beneficiary of this Agreement. CPS shall be
permitted to delegate its obligations hereunder to any agent
or subcontractor provided that CPS shall remain primarily
responsible to Distributor for CPS's obligations hereunder.
e. NOTICES. Any notice required to be given hereunder shall be
deemed sufficient and delivery shall be deemed complete if
sent by registered or certified mail, return receipt
requested, overnight courier, personal delivery, or confirmed
facsimile to the following addresses:
To CPS: CTI PET Systems, Inc.
810 Innovation Drive
Knoxville, TN 37932
Attn.: Chief Executive Officer
Facsimile: (865) 218-3001
To Distributor: Siemens Medical Solutions USA, Inc.
Nuclear Medicine Group
3501 North Barrington Road
Hoffman Estates, Illinois 60195
Attn: President, Siemen's Nuclear Medicine
Facsimile: (847) 304-7080
With a copy to: Associate General Counsel
186 Wood Avenue South
Iselin, New Jersey 98830
f. GOVERNING LAW. The interpretation and construction of this
Agreement shall be governed by and be construed in accordance
with the substantive law of the State of Tennessee, United
States of America, without regard to the conflict of laws
principles thereof.
g. REMEDIES CUMULATIVE. No failure or delay on the part of any
party to this Agreement in exercising any right, power or
remedy hereunder shall operate as a waiver thereof, nor shall
any single or partial exercise of any such right, power or
remedy preclude any other or further exercise thereof or the
exercise of any other right, power or remedy. The remedies
provided for
38
<PAGE>
herein are cumulative and are not exclusive of any remedies
that may be available to any party to this Agreement at law,
in equity or otherwise.
h. ENTIRE AGREEMENT. This Agreement (together with all Exhibits
hereto and any license or other agreements referenced herein)
represents the entire agreement and understanding of the
parties hereto with respect to the subject matter hereof and
supersedes all other prior agreements, understandings and
communications, whether oral or written. Unless expressly
agreed in writing by the parties hereto referencing this
Agreement, the terms hereof shall govern the sale of all
Products by CPS to Distributor, and all conflicting terms and
conditions in individual orders, purchase orders, and other
similar documents, shall be of no force and effect.
i. SURVIVAL. The provisions in Sections 1(b), 1(c), 1(d), 1(e),
1(f), 7, 8, 9, 11, 12, 13, 15, 16, 17 and 18 shall survive the
expiration or termination of this Agreement indefinitely.
IN WITNESS WHEREOF, the parties hereto have executed this Agreement as
of the day and year first herein written.
CTI PET SYSTEMS, INC. SIEMENS MEDICAL SOLUTIONS USA, INC.
By: Ronald Nutt By /s/ Thomas McCausland
------------------------------ ---------------------------------
Title: President Title: President and Chief Executive
--------------------------- Officer
------------------------------
39
<PAGE>
EXHIBIT A
Products/Specifications
PART NUMBER ITEM US LIST PRICE
----------- ---- -------------
800002 ECAT ACCEL *
*
REQUIRED EXTENSIONS
800004 Gantry Mounting Plate / EXACT Series *
800009 Gantry Cool Water/Water Chiller *
800006 Isolation Transformer (US+Japan) *
800005 Isolation Transformer (Europe) *
800007 Gantry air/water chiller(50Hz) *
800008 Gantry air/water chiller (60Hz) *
*
OPTIONAL EXTENSIONS
800014 Erasable Optical Disk *
800016 Cardiac Gating *
800018 Educational Software LPP *
800015 256MB RTS Memory Expansion *
800012 Ultra SPARC Remote Workstation *
800020 Sublimal Dye & Film Imager *
800019 Remote Diagnostics Modem - ISDN *
800021 Uninterruptible Power Supply *
800022 ECAT Mobile Option *
800037 Remote Start Footswitch *
800013 UltraSPARC Display Workstation *
800039 Surge Supressor - US Only *
800025 ACCEL Mobile Sources Kit (1st Filling) nondiscountable *
800024 ACCEL Sources Kit (1st Filling) nondiscountable *
800053 ACCEL Sources Kit (replacement) nondiscountable *
800045 Performance Testing nondiscountable *
800048 PET Applications Training (per day) nondiscountable *
800041 ACCEL Documentation
DICOM currently under review and in the event that DICOM is required CPS Product
Management should be contacted.
* Omitted information is the subject of a request for confidential treatment
pursuant to Rule 406 under the Securities Act of 1933 and has been filed
separately with the Securities and Exchange Commission.
40
<PAGE>
PART NUMBER ITEM & DESCRIPTION US LIST PRICE
----------- ------------------ -------------
800002 ECAT ACCEL POSITRON EMISSION *
TOMOGRAPHY (PET) SYSTEM
The ECAT ACCEL is a
high-resolution positron emission
tomography system for imaging
biochemical processes and
metabolism for whole body
applications. The multi-detector
ring system provides 2D or 3D
acquisition and reconstruction in
static and dynamic modes.
The ECAT ACCEL consists of a 47
image plane system with a 16.2 cm
axial field of view.
High spatial slice resolution in
transaxial and axial dimensions.
Three-dimensional display of
organs with a large axial view.
Excellent volume sensitivity
Fast acquisition and
reconstruction of 128x128,
256x256, and 512x512 matrices
High-resolution, flicker free,
color display monitor
Unique block detector technology
provides excellent temporal and
energy resolution response.
Simultaneous data acquisition and
image reconstruction for high
patient throughput.
Retractable rotating rod source
holders for quick and accurate
attenuation correction. (Ge-68
in safe, solid form is available
from recommended vendors).
Menu driven, window oriented
operating software
Water-cooled gantry for quiet
operation
The system consists of:
Whole-Body Ring Detector Gantry:
824 mm detector ring diameter.
56.2 cm gantry aperture.
16.2 cm (6.4 in) axial field of
view.
Nine laser lines for precise,
reproducible patient positioning.
Dual operator controls on gantry
for positioning from either side
of patient.
Count rate monitor at gantry
control panels.
Three integrated retractable
transmission rod source holders
which extend/retract from a lead
housing under computer control
for enhanced patient throughput
and reduced operator radiation exposure.
* Omitted information is the subject of a request for confidential treatment
pursuant to Rule 406 under the Securities Act of 1933 and has been filed
separately with the Securities and Exchange Commission.
41
<PAGE>
PART NUMBER ITEM & DESCRIPTION US LIST PRICE
----------- ------------------ -------------
Patient Handling System:
Low attenuation foam core carbon
fiber pallet
57 to 93 cm (22 to 36 inch)
vertical motion range
195 cm (77 inch) horizontal scan
range
Low attenuation head holder
Maximum patient weight at 159 kg
(350 lbs.)
Data Acquisition/Processing and
Storage Electronics:
Image plane coincidence processor
Real-time sorter (RTS) with 256
MB memory
VME Bus acquisition controller
SCSI adapter to the VME bus
18 GB acquisition disk
Ethernet interface to operator's
console
Operator's Console, including the
following:
UltraSPARC 60 with dual 450 MHz
CPUs
1.0 GB RAM
36 GB internal disk storage
4.1 GB erasable optical storage
system for archiving data
(mounted in desktop data storage
unit)
12 GB DAT (Digital Audio Tape)
archive system (mounted in
desktop data storage unit)
CDROM drive
Floppy drive
600 dpi laser printer
Ethernet connection to data
acquisition electronics
UNIX operating system and
utilities
TCP/IP and network file system
communication software
21 inch color monitor
ECAT Software Version 7.2
features, including iterative
reconstruction, segmented
attenuation correction, and the
whole body protocol.
ECAT Standard Software:
Image Acquisition:
Transmission scan allows accurate
measurement of tissue attenuation
correction coefficients
Static emission scan
Dynamic emission scan
Acquisition protocols
Image reconstruction and
processing
Wide variety of reconstruction
filters
Image size and displacement
parameters
Calculated or measured
attenuation correction
42
<PAGE>
PART NUMBER ITEM & DESCRIPTION US LIST PRICE
----------- ------------------ -------------
Display Software:
Window-oriented to allow
simultaneous acquisition,
reconstruction, data processing
and image display.
Image zoom and magnification
Multi-image static display
Any oblique data re-orientation
Cine mode display
Multiple plane dynamic displays
Image profiles
Image filtering, summing, and
arithmetic
Regions of interest and image
statistics
Screen save/restore operations
Image labeling with variable
fonts and graphics
Interactive color translation
table operations
Three-dimensional volume
interactive data review
(transverse, sagittal and coronal
displays)
Utilities Software:
Patient database
Patient data archive
System normalization and
calibration
Performance tests
System diagnostics
System Documentation (1 set)
ECAT scanner software manual
ECAT scanner hardware manual
---------------------------------------------------------------------------------------
*
800004 GANTRY MOUNTING PLATE / EXACT
SERIES
Mounting plate required for
siting ECAT scanner.
---------------------------------------------------------------------------------------
*
800009 GANTRY COOL WATER/WATER CHILLER
Quiet, closed system water/water
thermal transfer colling system.
Requires onsite chilled water
(10-15 C, 50-59 F). The water
water system may be sited in the
scanner room, given sufficient
space.
---------------------------------------------------------------------------------------
*
800006 ISOLATION TRANSFORMER (US+JAPAN)
Transformer for isolating ECAT
power from line power.
---------------------------------------------------------------------------------------
*
800005 ISOLATION TRANSFORMER (EUROPE)
Transformer for isolating ECAT
power from line power.
---------------------------------------------------------------------------------------
*
800007 GANTRY AIR/WATER CHILLER(50Hz)
Closed system air/water chiller.
Requires onsite chilled water.
Requires siting in
well-ventilated utility room.
* Omitted information is the subject of a request for confidential treatment
pursuant to Rule 406 under the Securities Act of 1933 and has been filed
separately with the Securities and Exchange Commission.
43
<PAGE>
PART NUMBER ITEM & DESCRIPTION US LIST PRICE
----------- ------------------ -------------
*
800008 GANTRY AIR/WATER CHILLER (60Hz)
Closed system air/water chiller.
Requires siting in
well-ventilated utility room.
---------------------------------------------------------------------------------------
*
800014 ERASABLE OPTICAL DISK
Additional 2.6 GB erasable
optical disk drive for storing
data and images at a UltraSPARC
Remote Workstation. UltraSPARC
Remote Workstation option
required for purchase of this
option.
---------------------------------------------------------------------------------------
*
800016 CARDIAC GATING
Gating trigger input, ECG monitor
and ECAT electronics for
performing cardiac gating.
---------------------------------------------------------------------------------------
*
800018 EDUCATIONAL SOFTWARE LPP
Multimedia educational package
LPP (Let's Play PET) for use on
separate Macintosh, ICON, or PC.
(Macintosh, ICON, or PC not
provided with system.)
---------------------------------------------------------------------------------------
*
800015 256MB RTS MEMORY EXPANSION
Additional real-time sorter
memory expansion. Up to 1
additional memory module may be
ordered for up to 512 MB total
RTS memory.
---------------------------------------------------------------------------------------
*
800012 ULTRA SPARC REMOTE WORKSTATION
UltraSPARC remote workstation for
7.2 systems. Includes the
following or better:
UltraSPARC 60 1300
500 MB
36 GB disk
20" monitor
CD drive
floppy drive
ECAT software version 7.2
Solaris 2.6 operating system
IDL 5.0 runtime license
---------------------------------------------------------------------------------------
*
800020 SUBLIMAL DYE & FILM IMAGER
ECAT Codonics medical diagnostic
imager (NP-1660M-CTI-01)
configuration including dye
diffusion/direct thermal dual
mode
* Omitted information is the subject of a request for confidential treatment
pursuant to Rule 406 under the Securities Act of 1933 and has been filed
separately with the Securities and Exchange Commission.
44
<PAGE>
PART NUMBER ITEM & DESCRIPTION US LIST PRICE
----------- ------------------ -------------
color and greyscale output.
Configuration comes equipped with
dye diffusion ribbon, 8.5" x 11"
paper (100 sheets) and tray and
8" x 10" clear base film (100
sheets) and tray. Also includes
postscript and DICOM support.
Hardware provided for network
connection to ECAT network.
---------------------------------------------------------------------------------------
*
800019 REMOTE DIAGNOSTICS MODEM - ISDN
ISDN modem for ECAT remote
diagnostics, for use by the ECAT
service engineer and ECAT
Technical Support.
---------------------------------------------------------------------------------------
*
800021 UNINTERRUPTIBLE POWER SUPPLY
Uninterruptible Power Supply
(UPS) option providing 10 minutes
of back up power enabling proper
shut down of system in the event
of power loss. Specifications:
6.0 KVA, 120/240 Volts, 50/60
Hertz.
US only.
---------------------------------------------------------------------------------------
*
800022 ECAT MOBILE OPTION
Required for all ECAT scanners
planned for mobile installation.
ECAT scanners installed in mobile
environments require power to the
scanner at all times, including
when scanner is not in use, and
that environmental requirements
specified in the ECAT Site
Planning Guide be met at all
times. The ECAT Mobile Option
includes items necessary for
installation of the ECAT into a
mobile coach or trailer.
Includes: 6.0 kVA UPS,
documentation and manuals
specific to mobile environments,
bed stanchions for transport, and
modified phantom shields.
Coach/trailer not included.
---------------------------------------------------------------------------------------
*
800037 REMOTE START FOOTSWITCH
Footswitch for starting scan
acquisitions remotely from the
console workstation without the
necessity of pressing the remote
start button on the gantry
control panel. Most commonly used
for performing studies where dose
injection is administered from
the rear of the gantry and when
employing very short-lived
isotopes. The footswitch is
connected to the scanner gantry
through the gantry entrance
panel, located on bottom port
side.
* Omitted information is the subject of a request for confidential treatment
pursuant to Rule 406 under the Securities Act of 1933 and has been filed
separately with the Securities and Exchange Commission.
45
<PAGE>
PART NUMBER ITEM & DESCRIPTION US LIST PRICE
----------- ------------------ -------------
Footswitch is supplied
with 10 ft cable. A sound is
reported when the footswitch is
depressed. Maximum of two
footswitches may be ordered per
scanner. Requires version 7.2
software.
---------------------------------------------------------------------------------------
*
800013 ULTRASPARC DISPLAY WORKSTATION
An UltraSPARC 10 workstation
configured primarily for display.
Includes the following or better:
- Ultra10 440MHz UltraSPARC II
processor
- 256 MB RAM memory
- 20 GB hard drive
- 32X CD-ROM
- Floppy drive, keyboard, and
mouse
- 21 inch color monitor
- ECAT Software version 7.2
- IDL 5.0 runtime license
---------------------------------------------------------------------------------------
*
800039 SURGE SUPRESSOR - US ONLY
Single phase, 240 VAC, AC power
panel surge protection system to
protect from transient over
voltages.
US only.
---------------------------------------------------------------------------------------
*
800025 ACCEL MOBILE SOURCES KIT (1ST
FILLING)
Calibration and transmission
sources for the mobile ECAT
ACCEL. These sources are to be
purchased with a new mobile ECAT
ACCEL Scanner. Sources consist
of the following:
1 set of Rods
1 CS-20-1 Uniform Phantom
1 CS-20-3 Uniform Phantom
1 LS-LA Set-up Source
---------------------------------------------------------------------------------------
*
800024 ACCEL SOURCES KIT (1ST FILLING)
Calibration and transmission
sources for the ECAT ACCEL.
These sources are to be purchased
with a new ECAT ACCEL scanner
order. Sources consist of the
following:
1 Set of Rods (LS-Accel)
1 CS-20-3 High Activity Uniform
Phantom
1 CS-20-1 Low Activity Uniform
Phantom
1 LS-LA Set-up rod
2 Phantom Shields
* Omitted information is the subject of a request for confidential treatment
pursuant to Rule 406 under the Securities Act of 1933 and has been filed
separately with the Securities and Exchange Commission.
46
<PAGE>
PART NUMBER ITEM & DESCRIPTION US LIST PRICE
----------- ------------------ -------------
*
800053 ACCEL SOURCES KIT (REPLACEMENT)
Calibration and transmission
sources for the ECAT ACCEL. These
sources are to be purchased on an
annual basis. Sources consist of
the following:
1 Set of Rods (LS-Accel)
1 CS-20-3 High Activity Uniform
Phantom
---------------------------------------------------------------------------------------
*
800045 PERFORMANCE TESTING
ECAT ART: 3D axial resolution,
3D transaxial resolution, 3D
sensitivity, 3D uniformity, and
3D count rate performed according
to NEMA. Modifications, changes
or additions to these tests
subject to factory approval and
quotation. All radioisotopes
(e.g. Flourine-18) to be provided
by the site.
ECAT EXACT, ACCEL and HR+: 2D
and 3D axial resolution, 2D and
3D transaxial resolution, 2D and
3D sensitivity, 2D and 3D
uniformity, and 3D count rate
performed according to NEMA.
Modifications, changes or
additions to these tests subject
to factory approval and
quotation. All radioisotopes
(e.g. Flourine-18) to be provided
by the site.
---------------------------------------------------------------------------------------
*
800048 PET APPLICATIONS TRAINING (PER
DAY)
Operator's training for ECAT
Scanners performed by
applications specialist.
Scheduling for training available
upon request. Standard 7.2
software training consists of 3
working days. New scanner
installation training consists of
five to ten working days.
---------------------------------------------------------------------------------------
*
800041 ACCEL DOCUMENTATION
One set ACCEL service
documentation and users' manuals.
---------------------------------------------------------------------------------------
---------------------------------------------------------------------------------------
* Omitted information is the subject of a request for confidential treatment
pursuant to Rule 406 under the Securities Act of 1933 and has been filed
separately with the Securities and Exchange Commission.
47
<PAGE>
PART NUMBER ITEM US LIST PRICE
----------- ---- -------------
800003 ECAT ART #220V 50/60Hz *
REQUIRED EXTENSIONS
800026 Gantry Mounting Plate/ART Series *
800006 Isolation Transformer (US+Japan) *
800005 Isolation Transformer (Europe) *
OPTIONAL EXTENSIONS
800014 Erasable Optical Disk *
800016 Cardiac Gating *
800018 Educational Software LPP *
800015 256MB RTS Memory Expansion *
800012 Ultra SPARC Remote Workstation *
800020 Sublimal Dye & Film Imager *
800027 ART Sources Kit (1st Filling) nondiscountable *
800019 Remote Diagnostics Modem - ISDN *
800021 Uninterruptible Power Supply *
800044 ART Documentation *
800037 Remote Start Footswitch *
800013 UltraSPARC Display Workstation *
800039 Surge Supressor - US Only *
800051 ART Sources Kit (replacement) nondiscountable *
800045 Performance Testing nondiscountable *
800048 PET Applications Training (per day) nondiscountable *
DICOM currently under review and in the event that DICOM is required CPS Product
Management should be contacted.
* Omitted information is the subject of a request for confidential treatment
pursuant to Rule 406 under the Securities Act of 1933 and has been filed
separately with the Securities and Exchange Commission.
48
<PAGE>
PART NUMBER ITEM & DESCRIPTION US LIST PRICE
----------- ------------------ -------------
800003 ECAT ART POSITRON EMISSION *
TOMOGRAPHY (PET) SYSTEM
The ECAT ART is a whole body
positron emission tomography
system which provides volume
measurements of metabolic and
physiologic processes.
The system consists of the
scanner, a patient handling
system, and operator's console.
The multidetector ring system
provides 3D acquisition and
reconstruction in static and
dynamic modes. Opposing detectors
are rotated to produce 47 image
planes and a 16.2 cm (6.4 inch)
axial field of view.
High spatial slice resolution in
transaxial and axial dimensions
Three-dimensional display of
organs with a large axial view
Excellent volume sensitivity
Fast acquisition and
reconstruction of 64 x 64,
128 x 128, and 256 x 256 matrices
High-resolution, flicker free,
color display monitor
Unique block detector technology
provides excellent
Temporal and energy resolution
response
Simultaneous data acquisition and
image reconstruction for high
patient throughput
Retractable Cs-137 source holders
for quick and accurate
attenuation correction (Cs-137 is
available from recommended
vendors)
Menu-driven, window-oriented
operating software.
The system consists of:
Whole Body Ring Detector Gantry:
66 detector blocks in continuous
rotation (two banks of a 3x11
detector block configuration)
82 cm (32 inch) detector ring
diameter
60 cm (23 inch) patient port
16.2 cm (6.4 inch) axial field of
view
Nine laser lines for precise,
reproducible patient positioning
Dual operator controls on gantry
for positioning from either side
of patient
Count rate monitor at gantry
control panels
* Omitted information is the subject of a request for confidential treatment
pursuant to Rule 406 under the Securities Act of 1933 and has been filed
separately with the Securities and Exchange Commission.
49
<PAGE>
PART NUMBER ITEM & DESCRIPTION US LIST PRICE
----------- ------------------ -------------
Two integrated retractable
transmission rod source holders
which extend/retract from a lead
housing under computer control
for enhanced patient throughput
and reduced radiation exposure.
Patient Handling System:
Low attenuation foam core carbon
fiber pallet
57 to 93 cm (22 to 36 inch)
vertical motion range
195 cm (77 inch) horizontal scan
range
Low attenuation head holder
Maximum patient weight of 159 kg
(350 lbs.).
Operator's Console, including the
following:
UltraSPARC 60 Workstation with
dual 450 MHz CPUs
1.0 GB main memory
36 GB internal disk storage
4.1 GB erasable optical storage
for archiving image data
CD ROM drive (mounted in desktop
data storage unit)
600 dpi laser printer
Ethernet connection to
acquisition and storage
electronics
4mm DAT (digital audio tape)
archive system
UNIX operating system and
utilities
TCP/IP and network file system
communication software.
Floppy drive
20 inch color monitor
ECAT Software version 7.2
features, including iterative
reconstruction, segmented
attenuation correction, and the
whole body protocol.
ECAT Standard Software:
Image Acquisition:
Transmission scan
Static emission scan
Dynamic emission scan
Acquisition protocols
Image reconstruction and
processing
Wide variety of reconstruction
filters
Image size and displacement
parameters
Calculated or measured
attenuation correction.
Display Software:
Window-oriented to allow
simultaneous acquisition,
reconstruction, data processing
and image display
Image zoom and magnification
Multi-image static display
Any oblique data re-orientation
Cine mode display
50
<PAGE>
PART NUMBER ITEM & DESCRIPTION US LIST PRICE
----------- ------------------ -------------
Multiple plane dynamic displays
Region of interest and image
profiles
Image filtering, summing and
arithmetic
Regions of interest and image
statistics
Screen save/restore operations
Image labeling with variable
fonts and graphics
Interactive color translation
table operations
Three-dimensional volume
interactive data review
(transverse, sagittal and coronal
displays).
Utilities Software:
Patient database
Patient data archive
Motion control
System calibration
System normalization
Performance tests
System diagnostics.
Educational Software:
Multi-media educational package
LPP (Let's Play PET) for use on
separate Macintosh or ICON (not
provided with system).
Systems Documentation (1 set):
ECAT scanner software manual
ECAT scanner hardware manual.
66 block detectors
4224 Bismuth germanate (BGO)
crystals
16.2 cm (6.4 inch) axial field of
view
Simultaneous acquisition of up to
47 contiguous slices
3D acquisition and reconstruction
Vertical and horizontal motion
patient handling system
Data acquisition and electronics
ECAT software
Operator's console.
---------------------------------------------------------------------------------------
*
800026 GANTRY MOUNTING PLATE/ART SERIES
---------------------------------------------------------------------------------------
*
800006 ISOLATION TRANSFORMER (US+JAPAN)
Transformer for isolating ECAT
power from line power.
---------------------------------------------------------------------------------------
*
800005 ISOLATION TRANSFORMER (EUROPE)
Transformer for isolating ECAT
power from line power.
* Omitted information is the subject of a request for confidential treatment
pursuant to Rule 406 under the Securities Act of 1933 and has been filed
separately with the Securities and Exchange Commission.
51
<PAGE>
PART NUMBER ITEM & DESCRIPTION US LIST PRICE
----------- ------------------ -------------
*
800014 ERASABLE OPTICAL DISK
Additional 2.6 GB erasable
optical disk drive for storing
data and images at a UltraSPARC
Remote Workstation. UltraSPARC
Remote Workstation option
required for purchase of this
option.
---------------------------------------------------------------------------------------
*
800016 CARDIAC GATING
Gating trigger input, ECG monitor
and ECAT electronics for
performing cardiac gating.
---------------------------------------------------------------------------------------
*
800018 EDUCATIONAL SOFTWARE LPP
Multimedia educational package
LPP (Let's Play PET) for use on
separate Macintosh, ICON, or PC.
(Macintosh, ICON, or PC not
provided with system.)
---------------------------------------------------------------------------------------
*
800015 256MB RTS MEMORY EXPANSION
Additional real-time sorter
memory expansion. Up to 1
additional memory module may be
ordered for up to 512 MB total
RTS memory.
---------------------------------------------------------------------------------------
*
800012 ULTRA SPARC REMOTE WORKSTATION
UltraSPARC remote workstation for
7.2 systems. Includes the
following or better:
UltraSPARC 60 1300
500 MB
36 GB disk
20" monitor
CD drive
floppy drive
ECAT software version 7.2
Solaris 2.6 operating system
IDL 5.0 runtime license
---------------------------------------------------------------------------------------
*
800020 SUBLIMAL DYE & FILM IMAGER
ECAT Codonics medical diagnostic
imager (NP-1660M-CTI-01)
configuration including dye
diffusion/direct thermal dual
mode color and greyscale output.
Configuration comes equipped with
dye diffusion ribbon, 8.5" x 11"
paper (100 sheets) and tray and
8" x 10" clear base film (100
sheets) and tray. Also includes
postscript and DICOM support.
Hardware provided for network
connection to ECAT network.
* Omitted information is the subject of a request for confidential treatment
pursuant to Rule 406 under the Securities Act of 1933 and has been filed
separately with the Securities and Exchange Commission.
52
<PAGE>
PART NUMBER ITEM & DESCRIPTION US LIST PRICE
----------- ------------------ -------------
*
800027 ART SOURCES KIT (1ST FILLING)
Calibration and transmission
sources for the ECAT ART. These
sources are to be purchased with
a new ECAT ART scanner order.
Sources consist of the following:
1 LS-ART Set-up Source
1 CS-ART Uniform Phantom
1 Phantom Shield
1 set of Cs-137 Point Sources
---------------------------------------------------------------------------------------
*
800019 REMOTE DIAGNOSTICS MODEM - ISDN
ISDN modem for ECAT remote
diagnostics, for use by the ECAT
service engineer and ECAT
Technical Support.
---------------------------------------------------------------------------------------
*
800021 UNINTERRUPTIBLE POWER SUPPLY
Uninterruptible Power Supply
(UPS) option providing 10 minutes
of back up power enabling proper
shut down of system in the event
of power loss. Specifications:
6.0 KVA, 120/240 Volts, 50/60
Hertz.
US only.
---------------------------------------------------------------------------------------
*
800044 ART DOCUMENTATION
One set ACCEL service
documentation and users' manuals.
---------------------------------------------------------------------------------------
*
800037 REMOTE START FOOTSWITCH
Footswitch for starting scan
acquisitions remotely from the
console workstation without the
necessity of pressing the remote
start button on the gantry
control panel. Most commonly used
for performing studies where dose
injection is administered from
the rear of the gantry and when
employing very short-lived
isotopes. The footswitch is
connected to the scanner gantry
through the gantry entrance
panel, located on bottom port
side. Footswitch is supplied
with 10 ft cable. A sound is
reported when the footswitch is
depressed. Maximum of two
footswitches may be ordered per
scanner. Requires version 7.2
software.
---------------------------------------------------------------------------------------
*
800013 ULTRASPARC DISPLAY WORKSTATION
An UltraSPARC 10 workstation
configured primarily for display.
Includes the following or better:
- Ultra10 440MHz UltraSPARC II
processor
- 256 MB RAM memory
- 20 GB hard drive
- 32X CD-ROM
- Floppy drive, keyboard, and
mouse
- 21 inch color monitor
- ECAT Software version 7.2
- IDL 5.0 runtime license
* Omitted information is the subject of a request for confidential treatment
pursuant to Rule 406 under the Securities Act of 1933 and has been filed
separately with the Securities and Exchange Commission.
53
<PAGE>
PART NUMBER ITEM & DESCRIPTION US LIST PRICE
----------- ------------------ -------------
*
800039 SURGE SUPRESSOR - US ONLY
Single phase, 240 VAC, AC power
panel surge protection system to
protect from transient over
voltages.
US only.
---------------------------------------------------------------------------------------
*
800051 ART SOURCES KIT (REPLACEMENT)
Calibration sources for the ECAT
ART. These sources are to be
purchased on an annual basis.
Sources consist of the following:
1 LS-LA Set-up rod
1 CS-20-1 Low Activity Uniform
Phantom
---------------------------------------------------------------------------------------
*
800045 PERFORMANCE TESTING
ECAT ART: 3D axial resolution,
3D transaxial resolution, 3D
sensitivity, 3D uniformity, and
3D count rate performed according
to NEMA. Modifications, changes
or additions to these tests
subject to factory approval and
quotation. All radioisotopes
(e.g. Flourine-18) to be provided
by the site.
ECAT EXACT, ACCEL and HR+: 2D
and 3D axial resolution, 2D and
3D transaxial resolution, 2D and
3D sensitivity, 2D and 3D
uniformity, and 3D count rate
performed according to NEMA.
Modifications, changes or
additions to these tests subject
to factory approval and
quotation. All radioisotopes
(e.g. Flourine-18) to be provided
by the site.
---------------------------------------------------------------------------------------
*
800048 PET APPLICATIONS TRAINING (PER
DAY)
Operator's training for ECAT
Scanners performed by
applications specialist.
Scheduling for training available
upon request. Standard 7.2
software training consists of 3
working days. New scanner
installation training consists of
five to ten working days.
---------------------------------------------------------------------------------------
* Omitted information is the subject of a request for confidential treatment
pursuant to Rule 406 under the Securities Act of 1933 and has been filed
separately with the Securities and Exchange Commission.
54
<PAGE>
PART NUMBER ITEM US LIST PRICE
----------- ---- -------------
800000 ECAT EXACT #220V *
REQUIRED EXTENSIONS
800004 Gantry Mounting Plate / EXACT Series *
800009 Gantry Cool Water/Water Chiller *
800006 Isolation Transformer (US+Japan) *
800005 Isolation Transformer (Europe) *
800007 Gantry air/water chiller(50Hz) *
800008 Gantry air/water chiller (60Hz) *
OPTIONAL EXTENSIONS
800014 Erasable Optical Disk *
800016 Cardiac Gating *
800018 Educational Software LPP *
800015 256MB RTS Memory Expansion *
800012 Ultra SPARC Remote Workstation *
800020 Sublimal Dye & Film Imager *
800019 Remote Diagnostics Modem - ISDN *
800021 Uninterruptible Power Supply *
800022 ECAT Mobile Option *
800025 EXACT Mobile Sources Kit (1st Filling) nondiscountable *
800037 Remote Start Footswitch *
800013 UltraSPARC Display Workstation *
800039 Surge Supressor - US Only *
800010 EXACT Sources Kit (1st Filling) nondiscountable *
800052 EXACT Sources Kit (replacement) nondiscountable *
800042 EXACT Documentation *
800045 Performance Testing nondiscountable *
800048 PET Applications Training (per day) nondiscountable *
DICOM currently under review and in the event that DICOM is required CPS Product
Management should be contacted.
* Omitted information is the subject of a request for confidential treatment
pursuant to Rule 406 under the Securities Act of 1933 and has been filed
separately with the Securities and Exchange Commission.
55
<PAGE>
PART NUMBER ITEM & DESCRIPTION US LIST PRICE
----------- ------------------ -------------
800000 ECAT EXACT POSITRON EMISSION *
TOMOGRAPHY (PET) SYSTEM
The ECAT EXACT is a
high-resolution positron emission
tomography system for imaging
biochemical processes and
metabolism for whole body
applications. The multi-detector
ring system provides 2D & 3D
acquisition and reconstruction in
the static and dynamic modes.
The ECAT EXACT consists of a 47
image plane system with a 16.2 cm
field of view.
High spatial slice resolution in
transaxial and axial dimensions
Three-dimensional display of
organs with a large axial view
Excellent volume sensitivity
Fast acquisition and
reconstruction of 64 x 64, 128 x
128, 256 x 256 matrices
High-resolution, flicker free,
color display monitor
Unique block detector technology
provides excellent temporal and
energy resolution response
Simultaneous data acquisition and
image reconstruction for high
patient throughput
Retractable rotating rod source
holders for quick and accurate
attenuation correction (Ge-68 is
available in safe, solid form
from recommended vendors).
Water-cooled gantry for quiet
operation.
Window-oriented operating
software.
The system consists of:
Whole Body Ring Detector Gantry:
824 mm detector ring diameter.
56.2 cm gantry aperture
16.2 cm (6.4 inch) axial field of
view
Nine laser lines for precise,
reproducible patient positioning
Dual operator controls on gantry
for positioning from either side
of patient
Count rate monitor at gantry
control panels
Three integrated retractable
transmission rod source holders
which extend/retract from a lead
housing under computer control
for enhanced patient throughput
and reduced radiation exposure.
* Omitted information is the subject of a request for confidential treatment
pursuant to Rule 406 under the Securities Act of 1933 and has been filed
separately with the Securities and Exchange Commission.
56
<PAGE>
PART NUMBER ITEM & DESCRIPTION US LIST PRICE
----------- ------------------ -------------
Patient Handling System:
Low attenuation foam core carbon
fiber pallet
57 to 93 cm (22 to 36 inch)
vertical motion range
195 cm (77 inch) horizontal scan
range
Low attenuation head holder
Maximum patient weight of 159 kg
(350 lbs.).
Data Acquisition/Processing and
Storage Electronics:
Image plane coincidence processor
Real-time sorter (RTS) with 256
MB memory
VME Bus acquisition controller
SCSI adapter to the VME Bus
18.0 GB GB acquisition disk
Ethernet interface to operator's
console
Operator's Console, including the
following:
UltraSPARC 60 Workstation with
dual 450 MHz CPUs
1.0 GB main memory
36 GB internal disk storage
4.1 GB erasable optical storage
for archiving image data
CD ROM drive (mounted in desktop
data storage unit)
600 dpi laser printer
Ethernet connection to
acquisition and storage
electronics
4mm DAT (digital audio tape)
archive system
UNIX operating system and
utilities
TCP/IP and network file system
communication software.
Floppy drive
20 inch color monitor
ECAT Software version 7.2
features, including iterative
reconstruction, segmented
attenuation correction, and the
whole body protocol.
ECAT Standard Software:
Image Acquisition:
Transmission scan
Static emission scan
Dynamic emission scan
Acquisition protocols
Image reconstruction and
processing
Wide variety of reconstruction
filters
Image size and displacement
parameters
Calculated or measured
attenuation correction.
Display Software:
Window-oriented to allow
simultaneous acquisition,
reconstruction, data processing
and image display
57
<PAGE>
PART NUMBER ITEM & DESCRIPTION US LIST PRICE
----------- ------------------ -------------
Image zoom and magnification
Multi-image static display
Any oblique data re-orientation
Cine mode display
Multiple plane dynamic displays
Region of interest and image
profiles
Image filtering, summing and
arithmetic
Regions of interest and image
statistics
Screen save/restore operations
Image labeling with variable
fonts and graphics
Interactive color translation
table operations
Three-dimensional volume
interactive data review
(transverse, sagittal and coronal
displays).
Utilities Software:
Patient database
Patient data archive
Motion control
System calibration
System normalization
Performance tests
System diagnostics.
Educational Software:
Multi-media educational package
LPP (Let's Play PET) for use on
separate Macintosh or ICON (not
provided with system).
Systems Documentation (1 set):
ECAT scanner software manual
ECAT scanner hardware manual.
Water-cooled, whole-body gantry
9216 Bismuth germanate (BGO)
crystals
16.2 cm (6.4 inch) axial field of
view
Simultaneous acquisition of up to
47 contiguous slices
23 interplane retractable septa
for high axial resolution, high
sensitivity, and minimum scatter
to permit 3-D acquisition.
Full-body patient couch and head
holder
Data acquisition and electronics
ECAT Software
Operator's console and peripherals
---------------------------------------------------------------------------------------
*
800004 GANTRY MOUNTING PLATE / EXACT
SERIES
Mounting plate required for
siting ECAT scanner.
---------------------------------------------------------------------------------------
*
800009 GANTRY COOL WATER/WATER CHILLER
Quiet, closed system water/water
thermal transfer colling system.
Requires onsite chilled water
(10-15 C, 50-59 F). The water
system may be sited in the
scanner room, given sufficient
space.
* Omitted information is the subject of a request for confidential treatment
pursuant to Rule 406 under the Securities Act of 1933 and has been filed
separately with the Securities and Exchange Commission.
58
<PAGE>
PART NUMBER ITEM & DESCRIPTION US LIST PRICE
----------- ------------------ -------------
*
800006 ISOLATION TRANSFORMER (US+JAPAN)
Transformer for isolating ECAT
power from line power.
---------------------------------------------------------------------------------------
*
800005 ISOLATION TRANSFORMER (EUROPE)
Transformer for isolating ECAT
power from line power.
---------------------------------------------------------------------------------------
*
800007 GANTRY AIR/WATER CHILLER(50Hz)
Closed system air/water chiller.
Requires onsite chilled water.
Requires siting in
well-ventilated utility room.
---------------------------------------------------------------------------------------
*
800008 GANTRY AIR/WATER CHILLER (60Hz)
Closed system air/water chiller.
Requires siting in
well-ventilated utility room.
---------------------------------------------------------------------------------------
*
800014 ERASABLE OPTICAL DISK
Additional 2.6 GB erasable
optical disk drive for storing
data and images at a UltraSPARC
Remote Workstation. UltraSPARC
Remote Workstation option
required for purchase of this
option.
---------------------------------------------------------------------------------------
*
800016 CARDIAC GATING
Gating trigger input, ECG monitor
and ECAT electronics for
performing cardiac gating.
---------------------------------------------------------------------------------------
*
800018 EDUCATIONAL SOFTWARE LPP
Multimedia educational package
LPP (Let's Play PET) for use on
separate Macintosh, ICON, or PC.
(Macintosh, ICON, or PC not
provided with system.)
---------------------------------------------------------------------------------------
*
800015 256MB RTS MEMORY EXPANSION
Additional real-time sorter
memory expansion. Up to 1
additional memory module may be
ordered for up to 512 MB total
RTS memory.
* Omitted information is the subject of a request for confidential treatment
pursuant to Rule 406 under the Securities Act of 1933 and has been filed
separately with the Securities and Exchange Commission.
59
<PAGE>
PART NUMBER ITEM & DESCRIPTION US LIST PRICE
----------- ------------------ -------------
*
800012 ULTRA SPARC REMOTE WORKSTATION
UltraSPARC remote workstation for
7.2 systems. Includes the
following or better:
UltraSPARC 60 1300
500 MB
36 GB disk
20" monitor
CD drive
floppy drive
ECAT software version 7.2
Solaris 2.6 operating system
IDL 5.0 runtime license
---------------------------------------------------------------------------------------
*
800020 SUBLIMAL DYE & FILM IMAGER
ECAT Codonics medical diagnostic
imager (NP-1660M-CTI-01)
configuration including dye
diffusion/direct thermal dual
mode color and greyscale output.
Configuration comes equipped with
dye diffusion ribbon, 8.5" x 11"
paper (100 sheets) and tray and
8" x 10" clear base film (100
sheets) and tray. Also includes
postscript and DICOM support.
Hardware provided for network
connection to ECAT network.
---------------------------------------------------------------------------------------
*
800019 REMOTE DIAGNOSTICS MODEM - ISDN
ISDN modem for ECAT remote
diagnostics, for use by the ECAT
service engineer and ECAT
Technical Support.
---------------------------------------------------------------------------------------
*
800021 UNINTERRUPTIBLE POWER SUPPLY
Uninterruptible Power Supply
(UPS) option providing 10 minutes
of back up power enabling proper
shut down of system in the event
of power loss. Specifications:
6.0 KVA, 120/240 Volts, 50/60
Hertz.
US only.
---------------------------------------------------------------------------------------
*
800022 ECAT MOBILE OPTION
Required for all ECAT scanners
planned for mobile installation.
ECAT scanners installed in mobile
environments require power to the
scanner at all times, including
when scanner is not in use, and
that environmental requirements
specified in the ECAT Site
Planning Guide be met at all
times. The ECAT Mobile Option
includes items necessary for
installation of the ECAT into a
mobile coach or trailer.
Includes: 6.0 kVA UPS,
documentation and manuals
* Omitted information is the subject of a request for confidential treatment
pursuant to Rule 406 under the Securities Act of 1933 and has been filed
separately with the Securities and Exchange Commission.
60
<PAGE>
PART NUMBER ITEM & DESCRIPTION US LIST PRICE
----------- ------------------ -------------
specific to mobile environments,
bed stanchions for transport, and
modified phantom shields.
Coach/trailer not included.
---------------------------------------------------------------------------------------
*
800025 EXACT MOBILE SOURCES KIT (1ST
FILLING)
Calibration and transmission
sources for the mobile ECAT
EXACT. These sources are to be
purchased with new mobile EXACT
orders. Includes the following:
1 set of rods
1 CS-20-1 Uniform Phantom
1 CS-20-3 Uniform Phantom
1 LS-LA Set-up Source
---------------------------------------------------------------------------------------
*
800037 REMOTE START FOOTSWITCH
Footswitch for starting scan
acquisitions remotely from the
console workstation without the
necessity of pressing the remote
start button on the gantry
control panel. Most commonly used
for performing studies where dose
injection is administered from
the rear of the gantry and when
employing very short-lived
isotopes. The footswitch is
connected to the scanner gantry
through the gantry entrance
panel, located on bottom port
side. Footswitch is supplied
with 10 ft cable. A sound is
reported when the footswitch is
depressed. Maximum of two
footswitches may be ordered per
scanner. Requires version 7.2
software.
---------------------------------------------------------------------------------------
*
800013 ULTRASPARC DISPLAY WORKSTATION
An UltraSPARC 10 workstation
configured primarily for display.
Includes the following or better:
- Ultra10 440MHz UltraSPARC II
processor
- 256 MB RAM memory
- 20 GB hard drive
-32X CD-ROM
- Floppy drive, keyboard, and
mouse
- 21 inch color monitor
- ECAT Software version 7.2
- IDL 5.0 runtime license
---------------------------------------------------------------------------------------
*
800039 SURGE SUPRESSOR - US ONLY
Single phase, 240 VAC, AC power
panel surge protection system to
protect from transient over
voltages.
US only.
* Omitted information is the subject of a request for confidential treatment
pursuant to Rule 406 under the Securities Act of 1933 and has been filed
separately with the Securities and Exchange Commission.
61
<PAGE>
PART NUMBER ITEM & DESCRIPTION US LIST PRICE
----------- ------------------ -------------
*
800010 EXACT SOURCES KIT (1ST FILLING)
Calibration and transmission
sources for the ECAT EXACT.
These sources are to be purchased
with a new ECAT EXACT scanner
order. Sources consist of the
following:
1 Set of Rods (LS-EXACT)
1 CS-20-3 High Activity Uniform
Phantom
1 CS-20-1 Low Activity Uniform
Phantom
1 LS-LA Set-up rod
2 CS-20-S Phantom Shields
---------------------------------------------------------------------------------------
*
800052 EXACT SOURCES KIT (REPLACEMENT)
Calibration and transmission
sources for the ECAT EXACT. These
sources are to be purchased on an
annual basis. Sources consist of
the following:
1 Set of Rods (LS-EXACT)
1 CS-20-3 High Activity Uniform
Phantom
---------------------------------------------------------------------------------------
*
800042 EXACT DOCUMENTATION
One set EXACTservice
documentation and users' manuals.
---------------------------------------------------------------------------------------
*
800045 PERFORMANCE TESTING
ECAT ART: 3D axial resolution,
3D transaxial resolution, 3D
sensitivity, 3D uniformity, and
3D count rate performed according
to NEMA. Modifications, changes
or additions to these tests
subject to factory approval and
quotation. All radioisotopes
(e.g. Flourine-18) to be provided
by the site.
ECAT EXACT, ACCEL and HR+: 2D
and 3D axial resolution, 2D and
3D transaxial resolution, 2D and
3D sensitivity, 2D and 3D
uniformity, and 3D count rate
performed according to NEMA.
Modifications, changes or
additions to these tests subject
to factory approval and
quotation. All radioisotopes
(e.g. Flourine-18) to be provided
by the site.
---------------------------------------------------------------------------------------
*
800048 PET APPLICATIONS TRAINING (PER
DAY)
Operator's training for ECAT
Scanners performed by
applications specialist.
Scheduling for training
available upon request.
Standard 7.2 software
training consists of 3
working days. New scanner
installation training consists of
five to ten working days.
* Omitted information is the subject of a request for confidential treatment
pursuant to Rule 406 under the Securities Act of 1933 and has been filed
separately with the Securities and Exchange Commission.
62
<PAGE>
PART NUMBER ITEM US LIST PRICE
----------- ---- -------------
800001 ECAT EXACT HR+ 220V *
REQUIRED EXTENSIONS
800004 Gantry Mounting Plate / EXACT Series *
800009 Gantry Cool Water/Water Chiller *
800006 Isolation Transformer (US+Japan) *
800005 Isolation Transformer (Europe) *
800007 Gantry air/water chiller(50Hz) *
800008 Gantry air/water chiller (60Hz) *
OPTIONAL EXTENSIONS
800014 Erasable Optical Disk *
800016 Cardiac Gating *
800018 Educational Software LPP *
800015 256MB RTS Memory Expansion *
800012 Ultra SPARC Remote Workstation *
800020 Sublimal Dye & Film Imager *
800023 HR+ Sources Kit (1st Filling) nondiscountable *
800019 Remote Diagnostics Modem - ISDN *
800021 Uninterruptible Power Supply *
800037 Remote Start Footswitch *
800013 UltraSPARC Display Workstation *
800039 Surge Supressor - US Only *
800045 Performance Testing nondiscountable *
800048 PET Applications Training (per day) nondiscountable *
800049 HR+ Sources Kit (replacement) nondiscountable *
800043 EXACT HR+ Documentation *
DICOM currently under review and in the event that DICOM is required CPS Product
Management should be contacted.
* Omitted information is the subject of a request for confidential treatment
pursuant to Rule 406 under the Securities Act of 1933 and has been filed
separately with the Securities and Exchange Commission.
63
<PAGE>
PART NUMBER ITEM & DESCRIPTION US LIST PRICE
----------- ------------------ -------------
800001 ECAT EXACT HR+ POSITRON EMISSION *
TOMOGRAPHY (PET) SYSTEM
The ECAT EXACT HR+ is a
whole-body positron emission
tomography system providing 3D
volume measurements of metabolic
and physiologic processes.
The multi-detector ring system
provides 3D acquisition and
reconstruction in the static and
dynamic modes and consists of 63
image planes with a 15.5 cm field
of view.
High spatial slice resolution in
transaxial and axial dimensions
Three-dimensional display of
organs with a large axial view
Excellent volume sensitivity
Fast acquisition and
reconstruction of 64 x 64, 128 x
128, and 256 x 256 matrices
High-resolution, flicker free,
color display monitor
Unique block detector technology
provides excellent temporal and
energy resolution response
Simultaneous data acquisition and
image reconstruction for high
patient throughput
Retractable rotating rod source
holders for quick and accurate
attenuation correction (Ge-68 is
available in safe, solid form
from recommended vendors).
Menu driven, window-oriented
operating software.
The system consists of:
Whole Body Ring Detector Gantry:
824 mm detector ring diameter.
56.2 cm gantry aperture
15.5 cm axial field of view
Nine laser lines for precise,
reproducible patient positioning
Dual operator controls on gantry
for positioning from either side
of patient
Count rate monitor at gantry
control panels
Three integrated retractable
transmission rod source holders
which extend/retract from a lead
housing under computer control
for enhanced patient throughput
and reduced radiation exposure.
* Omitted information is the subject of a request for confidential treatment
pursuant to Rule 406 under the Securities Act of 1933 and has been filed
separately with the Securities and Exchange Commission.
64
<PAGE>
PART NUMBER ITEM & DESCRIPTION US LIST PRICE
----------- ------------------ -------------
Patient Couch:
Low attenuation foam core carbon
fiber pallet
57 to 93 cm (22 to 36 inch)
vertical motion range
195 cm (77 inch) horizontal scan
range
Low attenuation head holder
Maximum patient weight of 159 kg
(350 lbs.).
Data Acquisition/Processing and
Storage Electronics:
Image plane coincidence processor
Real-time sorter (RTS) with 256
MB memory
VME Bus acquisition controller
SCSI adapter to the VME Bus
18.0 GB GB acquisition disk
Ethernet interface to operator's
console
Operator's Console, including the
following:
UltraSPARC 60 Workstation with
dual 450 MHz CPUs
1.0 GB main memory
36 GB internal disk storage
4.1 GB erasable optical storage
for archiving image data
CD ROM drive (mounted in desktop
data storage unit)
600 dpi laser printer
Ethernet connection to
acquisition and storage
electronics
4mm DAT (digital audio tape)
archive system
UNIX operating system and
utilities
TCP/IP and network file system
communication software.
Floppy drive
20 inch color monitor
ECAT Software version 7.2
features, including iterative
reconstruction, segmented
attenuation correction, and the
whole body protocol.
ECAT Standard Software:
Image Acquisition:
Transmission scan
Static emission scan
Dynamic emission scan
Acquisition protocols
Image reconstruction and
processing
Wide variety of reconstruction
filters
Image size and displacement
parameters
Calculated or measured
attenuation correction.
Display Software:
Window-oriented to allow
simultaneous acquisition,
reconstruction, data processing
and image display
Image zoom and magnification
65
<PAGE>
PART NUMBER ITEM & DESCRIPTION US LIST PRICE
----------- ------------------ -------------
Multi-image static display
Any oblique data re-orientation
Cine mode display
Multiple plane dynamic displays
Region of interest and image
profiles
Image filtering, summing and
arithmetic
Regions of interest and image
statistics
Screen save/restore operations
Image labeling with variable
fonts and graphics
Interactive color translation
table operations
Three-dimensional volume
interactive data review
(transverse, sagittal and coronal
displays).
Utilities Software:
Patient database
Patient data archive
Motion control
System calibration
System normalization
Performance tests
System diagnostics.
Educational Software:
Multi-media educational package
LPP (Let's Play PET) for use on
separate Macintosh or ICON (not
provided with system).
Systems Documentation (1 set):
ECAT scanner software manual
ECAT scanner hardware manual.
Water-cooled, whole-body gantry
18,432 Bismuth germanate (BGO)
crystals
15.5 cm axial field of view
Simultaneous acquisition of up to
63 contiguous slices
31 interplane retractable septa
for high axial resolution, high
sensitivity, and 3-D acquisition
and reconstruction.
Full-body patient couch and head
holder
Data acquisition and electronics
ECAT Software
Operator's workstations
---------------------------------------------------------------------------------------
*
800004 GANTRY MOUNTING PLATE / EXACT
SERIES
Mounting plate required for
siting ECAT scanner.
---------------------------------------------------------------------------------------
*
800009 GANTRY COOL WATER/WATER CHILLER
Quiet, closed system water/water
thermal transfer colling system.
Requires onsite chilled water
(10-15 C, 50-59 F). The water
system may be sited in the
scanner room, given sufficient
space.
* Omitted information is the subject of a request for confidential treatment
pursuant to Rule 406 under the Securities Act of 1933 and has been filed
separately with the Securities and Exchange Commission.
66
<PAGE>
PART NUMBER ITEM & DESCRIPTION US LIST PRICE
----------- ------------------ -------------
*
800006 ISOLATION TRANSFORMER (US+JAPAN)
Transformer for isolating ECAT
power from line power.
---------------------------------------------------------------------------------------
*
800005 ISOLATION TRANSFORMER (EUROPE)
Transformer for isolating ECAT
power from line power.
---------------------------------------------------------------------------------------
*
800007 GANTRY AIR/WATER CHILLER(50HZ)
Closed system air/water chiller.
Requires onsite chilled water.
Requires siting in
well-ventilated utility room.
---------------------------------------------------------------------------------------
*
800008 GANTRY AIR/WATER CHILLER (60HZ)
Closed system air/water chiller.
Requires siting in
well-ventilated utility room.
---------------------------------------------------------------------------------------
*
800014 ERASABLE OPTICAL DISK
Additional 2.6 GB erasable
optical disk drive for storing
data and images at a UltraSPARC
Remote Workstation. UltraSPARC
Remote Workstation option
required for purchase of this
option.
---------------------------------------------------------------------------------------
*
800016 CARDIAC GATING
Gating trigger input, ECG monitor
and ECAT electronics for
performing cardiac gating.
---------------------------------------------------------------------------------------
*
800018 EDUCATIONAL SOFTWARE LPP
Multimedia educational package
LPP (Let's Play PET) for use on
separate Macintosh, ICON, or PC.
(Macintosh, ICON, or PC not
provided with system.)
---------------------------------------------------------------------------------------
*
800015 256MB RTS MEMORY EXPANSION
Additional real-time sorter
memory expansion. Up to 1
additional memory module may be
ordered for up to 512 MB total
RTS memory.
* Omitted information is the subject of a request for confidential treatment
pursuant to Rule 406 under the Securities Act of 1933 and has been filed
separately with the Securities and Exchange Commission.
67
<PAGE>
PART NUMBER ITEM & DESCRIPTION US LIST PRICE
----------- ------------------ -------------
*
800012 ULTRA SPARC REMOTE WORKSTATION
UltraSPARC remote workstation for
7.2 systems. Includes the
following or better:
UltraSPARC 60 1300
500 MB
36 GB disk
20" monitor
CD drive
floppy drive
ECAT software version 7.2
Solaris 2.6 operating system
IDL 5.0 runtime license
---------------------------------------------------------------------------------------
*
800020 SUBLIMAL DYE & FILM IMAGER
ECAT Codonics medical diagnostic
imager (NP-1660M-CTI-01)
configuration including dye
diffusion/direct thermal dual
mode color and greyscale output.
Configuration comes equipped with
dye diffusion ribbon, 8.5" x 11"
paper (100 sheets) and tray and
8" x 10" clear base film (100
sheets) and tray. Also includes
postscript and DICOM support.
Hardware provided for network
connection to ECAT network.
---------------------------------------------------------------------------------------
*
800023 HR+ SOURCES KIT (1ST FILLING)
Calibration and transmission
sources for the ECAT EXACT HR+.
These sources are to be purchased
with a new ECAT EXACT HR+ scanner
order. Sources consist of the
following:
1 Set of Rods
1 CS-20 Uniform Phantom
1 CS-ART Uniform Phantom
1 LS-LA Set-up Source
2 Phantom Shields
---------------------------------------------------------------------------------------
*
800019 REMOTE DIAGNOSTICS MODEM - ISDN
ISDN modem for ECAT remote
diagnostics, for use by the ECAT
service engineer and ECAT
Technical Support.
---------------------------------------------------------------------------------------
*
800021 UNINTERRUPTIBLE POWER SUPPLY
Uninterruptible Power Supply
(UPS) option providing 10 minutes
of back up power enabling proper
shut down of system in the event
of power loss. Specifications:
6.0 KVA, 120/240 Volts, 50/60
Hertz.
US only.
* Omitted information is the subject of a request for confidential treatment
pursuant to Rule 406 under the Securities Act of 1933 and has been filed
separately with the Securities and Exchange Commission.
68
<PAGE>
PART NUMBER ITEM & DESCRIPTION US LIST PRICE
----------- ------------------ -------------
*
800037 REMOTE START FOOTSWITCH
Footswitch for starting scan
acquisitions remotely from the
console workstation without the
necessity of pressing the remote
start button on the gantry
control panel. Most commonly used
for performing studies where dose
injection is administered from
the rear of the gantry and when
employing very short-lived
isotopes. The footswitch is
connected to the scanner gantry
through the gantry entrance
panel, located on bottom port
side. Footswitch is supplied
with 10 ft cable. A sound is
reported when the footswitch is
depressed. Maximum of two
footswitches may be ordered per
scanner. Requires version 7.2
software.
---------------------------------------------------------------------------------------
*
800013 ULTRASPARC DISPLAY WORKSTATION
An UltraSPARC 10 workstation
configured primarily for display.
Includes the following or better:
- Ultra10 440MHz UltraSPARC II
processor
- 256 MB RAM memory
- 20 GB hard drive
-32X CD-ROM
- Floppy drive, keyboard, and
mouse
- 21 inch color monitor
- ECAT Software version 7.2
- IDL 5.0 runtime license
---------------------------------------------------------------------------------------
*
800039 SURGE SUPRESSOR - US ONLY
Single phase, 240 VAC, AC power
panel surge protection system to
protect from transient over
voltages.
US only.
---------------------------------------------------------------------------------------
*
800045 PERFORMANCE TESTING
ECAT ART: 3D axial resolution,
3D transaxial resolution, 3D
sensitivity, 3D uniformity, and
3D count rate performed according
to NEMA. Modifications, changes
or additions to these tests
subject to factory approval and
quotation. All radioisotopes
(e.g. Flourine-18) to be provided
by the site.
ECAT EXACT, ACCEL and HR+: 2D
and 3D axial resolution, 2D and
3D transaxial resolution, 2D and
3D sensitivity, 2D and 3D
uniformity, and 3D count rate
performed according to NEMA.
Modifications, changes or
additions to these tests subject
to factory approval and
quotation. All radioisotopes
(e.g. Flourine-18) to be provided
by the site.
* Omitted information is the subject of a request for confidential treatment
pursuant to Rule 406 under the Securities Act of 1933 and has been filed
separately with the Securities and Exchange Commission.
69
<PAGE>
PART NUMBER ITEM & DESCRIPTION US LIST PRICE
----------- ------------------ -------------
*
800048 PET APPLICATIONS TRAINING (PER
DAY)
Operator's training for ECAT
Scanners performed by
applications specialist.
Scheduling for training available
upon request. Standard 7.2
software training consists of 3
working days. New scanner
installation training consists of
five to ten working days.
---------------------------------------------------------------------------------------
*
800049 HR+ SOURCES KIT (REPLACEMENT)
Calibration and transmission
sources for the ECAT EXACT HR+.
These sources are to be purchased
on an annual basis. Sources
consist of the following:
1 Set of Rods (LS-HR+)
1 CS-20-3 High Activity Uniform
Phantom
---------------------------------------------------------------------------------------
*
800043 EXACT HR+ DOCUMENTATION
One set EXACT HR+ service
documentation and users' manuals.
---------------------------------------------------------------------------------------
PART NUMBER ITEM US LIST PRICE
----------- ---- -------------
800033 PET/CT *
REQUIRED EXTENSIONS
800009 Gantry Cool Water/Water Chiller *
800006 Isolation Transformer (US+Japan) *
800005 Isolation Transformer (Europe) *
800007 Gantry air/water chiller(50Hz) *
800008 Gantry air/water chiller (60Hz) *
OPTIONAL EXTENSIONS
800018 Educational Software LPP *
800020 Sublimal Dye & Film Imager *
800038 RTP Flat Pallet *
800047 PET/CT Sources Kit (1st Filling) *
800054 PET/CT Sources Kit (replacement) nondiscountable *
800045 Performance Testing nondiscountable *
800048 PET Applications Training (per day) nondiscountable *
DICOM currently under review and in the event that DICOM is required CPS Product
Management should be contacted.
* Omitted information is the subject of a request for confidential treatment
pursuant to Rule 406 under the Securities Act of 1933 and has been filed
separately with the Securities and Exchange Commission.
70
<PAGE>
PART NUMBER ITEM & DESCRIPTION US LIST PRICE
----------- ------------------ -------------
800033 PET/CT *
The PET/CT Tomograph is a
whole-body tomograph designed for
the purposes of oncological
imaging and diagnosis:
- high-resolution,
high-countrate, positron emission
tomography (PET) imaging of
metabolic and physiologic
processes.
- high performance spiral
computed tomography (CT)
applications.
- highest quality metabolic and
anatomic image registration and
fusion for optimal lesion
detection and identification
within the body habitus.
- highest quality attenuation
correction for quantitative PET
imaging.
- highest quality scatter
correction for PET imaging.
The PET imaging capability of the
PET/CT Tomograph consists of the
ECAT EXACT HR+ multi-detector
ring system with 3D acquisition
and reconstruction and 63 image
planes with a 15.5 cm axial field
of view.
- High spatial slice resolution
in transaxial and axial
dimensions.
- Finest slice spacing (2.4 mm)
- Three-dimensional display of
organs with a large axial view.
- Excellent volume sensitivity.
- Fast acquisition and
reconstruction of 128 x 128, 256
x 256, and 512 x 512 matrices.
- Unique block detector
technology provides excellent
temporal and energy resolution
response.
- Simultaneous data acquisition
and image reconstruction for high
patient throughput.
- Dynamic, static, and whole body
acquisition capability.
- 824 mm detector ring diameter.
- 70 cm gantry aperture.
- 15.5 cm axial field of view.
- Dual operator controls on
gantry for positioning from
either side of patient.
The CT imaging capability of the
PET/CT Tomograph consists of the
SOMATOM Emotion featuring a full
range of SPIRAL CT clinical
applications with highest
performance.
71
<PAGE>
PART NUMBER ITEM & DESCRIPTION US LIST PRICE
----------- ------------------ -------------
- UFCTM (Ultrafast Ceramic)
detector system for excellent
image quality with minimal dose
requirement
- Siemens DURA 302
high-performance CT x-ray tube
assembly with Flying Focal Spot
allows a doubling of projections
for high resolution, artifact
free imaging throughout the
entire 50 cm scan field for all
scan modes
- High voltage range: 80, 110 and
130kV
- Tube current range: 30 to 240 mA
- Flying focal spot sizes: 0.8 x
0.4mm, 0.8 x 0.7mm (IEC3 36/93)
- DURAMATIC(R) High Power X-ray
generator operating at 40kW
- Gantry rotation speed: 0.8s,
1s, 1.5s
- 70 cm gantry opening for very
large patients and additional
access to the patient for
preparation and interventional
examinations
- 50 cm scan field of view in all
scan modes including high
resolution
- High resolution lung studies
with large field of view
- Reproducible head studies:
reduced image artifacts due to
patient positioning
Scanning Modes
The SOMATOM Emotion's Scanning
and Evaluation Software provides
a full range of scanning and
image evaluation choices to
provide the best diagnostic
information based on the CT
images.
TOPOGRAM
TOPOGRAM for definition of the
scan area of interest
- Scanning views: a.p., p.a. and
lateral;
- 30 degree steps optional
- Scan field length: 128mm,
256mm, 512mm or 1024mm
TOMOGRAM
Slice Thickness: 1,2,3,5,8 and
10mm
SPIRAL CT
Volume scanning with continuous
table feed for both body and
neuro examinations. Examination
can be divided into multiple
coverage ranges (Multi Spiral
mode) to optimize throughput,
resolution and contrast
utilization.
DYNAMIC
Serial scanning in a single slice
position with variable scan cycle
times to examine time-related
contrast medium dynamics.
72
<PAGE>
PART NUMBER ITEM & DESCRIPTION US LIST PRICE
----------- ------------------ -------------
SERIO
Fast dynamic single scans in a
single slice location. Variable
delay between scans for
time-dependent examinations.
Patient Handling System
- Reinforced cantilever design
for maximum patient support and
absolute positioning between PET
and CT scan.
- Integrated patient table design
for easy patient positioning.
- Low attenuation carbon fiber
pallet.
- 48 to 88 cm (19 to 34 inch)
vertical motion range.
- 150 cm (59 inch) horizontal
scan range.
- Low attenuation head holder.
- Maximum patient weight of 204
kg (450 lbs.).
Image Control System (ICS)
User Console provides streamlined
work flow for easy and fast
patient scanning and evaluation.
It's windows user interface is
designed for optimal system
operation, scan monitoring, image
evaluation, filming and archiving
- High resolution 53cm (21 inch)
color monitor
- Console desk with keyboard,
scan control box and mouse
- Intercom system and user
programmable Automatic Patient
Instruction system (API)
- Syngo based Windows NT platform
Image Reconstruction System (IRS)
High performance system for fast
image reconstruction and
evaluation as well as management
of CT images
- 3 sec per image reconstruction
time (512x512)
ACS III PET Acquisition System
Supports static, dynamic, whole
body, and gated (optional)
acquisition modes
Display Workstation
- High performance display system
provides advanced multi-modality
image display and data fusion
capabilities. Supports image
coregistration.
- High resolution 53 cm (21 inch)
color monitor
- Keyboard and mouse
- Syngo based Windows NT platform
Image Evaluation
Complete software-guided image
evaluation program for all
diagnostic requirements.
73
<PAGE>
PART NUMBER ITEM & DESCRIPTION US LIST PRICE
----------- ------------------ -------------
Networking and Documentation
Connection to a local Ethernet
network for communication with
network printers, diagnostic and
therapy workstations, RIS systems
and teleradiology routers.
- Freely configurable network
stations; unlimited selection of
stations
- Support of DICOM 3.0 standard
(Digital Imaging and
Communications in Medicine) for
the transfer of information
between DICOM-compatible units
from different manufacturers. The
scope of function is described in
detail in the DICOM Conformance
Statement and comprises the
following standard functions:
- Send/Receive
- Query/Retrieve
- BasicPrint
- Get Worklist (HIS/RIS)
- Image data exchange with MR and
therapy units as well as
workstations and teleradiology
routers which support the DICOM
3.0 standard
System Documentation (1 set)
Software manual
Hardware manual
---------------------------------------------------------------------------------------
*
800009 GANTRY COOL WATER/WATER CHILLER
Quiet, closed system water/water
thermal transfer colling system.
Requires onsite chilled water
(10-15 C, 50-59 F). The water
system may be sited in the
scanner room, given sufficient
space.
---------------------------------------------------------------------------------------
*
800006 ISOLATION TRANSFORMER (US+JAPAN)
Transformer for isolating ECAT
power from line power.
---------------------------------------------------------------------------------------
*
800005 ISOLATION TRANSFORMER (EUROPE)
Transformer for isolating ECAT
power from line power.
---------------------------------------------------------------------------------------
*
800007 GANTRY AIR/WATER CHILLER(50HZ)
Closed system air/water chiller.
Requires onsite chilled water.
Requires siting in
well-ventilated utility room.
---------------------------------------------------------------------------------------
*
800008 GANTRY AIR/WATER CHILLER (60HZ)
Closed system air/water chiller.
Requires siting in
well-ventilated utility room.
* Omitted information is the subject of a request for confidential treatment
pursuant to Rule 406 under the Securities Act of 1933 and has been filed
separately with the Securities and Exchange Commission.
74
<PAGE>
PART NUMBER ITEM & DESCRIPTION US LIST PRICE
----------- ------------------ -------------
*
800018 EDUCATIONAL SOFTWARE LPP
Multimedia educational package
LPP (Let's Play PET) for use on
separate Macintosh, ICON, or PC.
(Macintosh, ICON, or PC not
provided with system.)
---------------------------------------------------------------------------------------
*
800020 SUBLIMAL DYE & FILM IMAGER
ECAT Codonics medical diagnostic
imager (NP-1660M-CTI-01)
configuration including dye
diffusion/direct thermal dual
mode color and greyscale output.
Configuration comes equipped with
dye diffusion ribbon, 8.5" x 11"
paper (100 sheets) and tray and
8" x 10" clear base film (100
sheets) and tray. Also includes
postscript and DICOM support.
Hardware provided for network
connection to ECAT network.
---------------------------------------------------------------------------------------
*
800038 RTP FLAT PALLET
Flat pallet adapter allows
imaging for radiation therapy
planning. (for use with PET/CT
patient bed only)
---------------------------------------------------------------------------------------
*
800047 PET/CT SOURCES KIT (1ST FILLING)
Calibration sources for the
PET-CT. These sources are to be
purchased with a new PET-CT
scanner order. Sources consist of
the following:
1 LS-LA Set-up rod
1 CS-20-1 Low Activity Uniform
Phantom
1 CS-20-S Phantom Shield
---------------------------------------------------------------------------------------
*
800054 PET/CT SOURCES KIT (REPLACEMENT)
Calibration sources for the
PET-CT. These sources are to be
purchased with a new PET-CT
scanner order. Sources consist of
the following:
1 LS-LA Set-up rod
1 CS-20-1 Low Activity Uniform
Phantom
---------------------------------------------------------------------------------------
*
800045 PERFORMANCE TESTING
ECAT ART: 3D axial resolution,
3D transaxial resolution, 3D
sensitivity, 3D uniformity, and
3D count rate performed according
to NEMA. Modifications, changes
or additions to
* Omitted information is the subject of a request for confidential treatment
pursuant to Rule 406 under the Securities Act of 1933 and has been filed
separately with the Securities and Exchange Commission.
75
<PAGE>
PART NUMBER ITEM & DESCRIPTION US LIST PRICE
----------- ------------------ -------------
these tests subject to factory
approval and quotation. All
radioisotopes (e.g. Flourine-18)
to be provided by the site.
ECAT EXACT, ACCEL and HR+: 2D
and 3D axial resolution, 2D and
3D transaxial resolution, 2D and
3D sensitivity, 2D and 3D
uniformity, and 3D count rate
performed according to NEMA.
Modifications, changes or
additions to these tests subject
to factory approval and
quotation. All radioisotopes
(e.g. Flourine-18) to be provided
by the site.
---------------------------------------------------------------------------------------
*
800048 PET APPLICATIONS TRAINING (PER
DAY)
Operator's training for ECAT
Scanners performed by
applications specialist.
Scheduling for training available
upon request. Standard 7.2
software training consists of 3
working days. New scanner
installation training consists of
five to ten working days.
PART NUMBER ITEM US LIST PRICE
----------- ---- -------------
800056 ECAT EMERGE *
REQUIRED EXTENSIONS
800026 Gantry Mounting Plate/ART Series *
800006 Isolation Transformer (US+Japan) *
800005 Isolation Transformer (Europe) *
OPTIONAL EXTENSIONS
800014 Erasable Optical Disk *
800016 Cardiac Gating *
800018 Educational Software LPP *
800015 256MB RTS Memory Expansion *
800012 Ultra SPARC Remote Workstation *
800020 Sublimal Dye & Film Imager *
800057 EMERGE Sources Kit (1st Filling) nondiscountable *
800019 Remote Diagnostics Modem - ISDN *
800021 Uninterruptible Power Supply *
800059 EMERGE Documentation *
800037 Remote Start Footswitch *
800013 UltraSPARC Display Workstation *
800039 Surge Supressor - US Only *
800058 EMERGE Sources Kit (replacement) nondiscountable *
800045 Performance Testing nondiscountable *
800048 PET Applications Training (per day) nondiscountable *
DICOM currently under review and in the event that DICOM is required CPS Product
Management should be contacted.
* Omitted information is the subject of a request for confidential treatment
pursuant to Rule 406 under the Securities Act of 1933 and has been filed
separately with the Securities and Exchange Commission.
76
<PAGE>
PART NUMBER ITEM & DESCRIPTION US LIST PRICE
----------- ------------------ -------------
800056 ECAT EMERGE POSITRON EMISSION *
TOMOGRAPHY (PET) SYSTEM
The ECAT EMERGE is a whole body
positron emission tomography
system which provides volume
measurements of metabolic and
physiologic processes.
The system consists of the
scanner, a patient handling
system, and operator's console.
The multidetector ring system
provides 3D acquisition and
reconstruction in static and
dynamic modes. Opposing
detectors are rotated to produce
47 image planes and a 16.2 cm
(6.4 inch) axial field of view.
High spatial slice resolution in
transaxial and axial dimensions
Three-dimensional display of
organs with a large axial view
Excellent volume sensitivity
Fast acquisition and
reconstruction of 64 x 64,
128 x 128, and 256 x 256 matrices
High-resolution, flicker free,
color display monitor
Unique block detector technology
provides excellent
Temporal and energy resolution
response
Simultaneous data acquisition and
image reconstruction for high
patient throughput
Retractable Cs-137 source holders
for quick and accurate
attenuation correction (Cs-137 is
available from recommended
vendors)
Menu-driven, window-oriented
operating software.
The system consists of:
Whole Body Ring Detector Gantry:
66 detector blocks in continuous
rotation (two banks of a 3x11
detector block configuration)
82 cm (32 inch) detector ring
diameter
60 cm (23 inch) patient port
16.2 cm (6.4 inch) axial field of
view
Nine laser lines for precise,
reproducible patient positioning
Dual operator controls on gantry
for positioning from either side
of patient
Count rate monitor at gantry
control panels
* Omitted information is the subject of a request for confidential treatment
pursuant to Rule 406 under the Securities Act of 1933 and has been filed
separately with the Securities and Exchange Commission.
77
<PAGE>
PART NUMBER ITEM & DESCRIPTION US LIST PRICE
----------- ------------------ -------------
Two integrated retractable
transmission rod source holders
which extend/retract from a lead
housing under computer control
for enhanced patient throughput
and reduced radiation exposure.
Patient Handling System:
Low attenuation foam core carbon
fiber pallet
57 to 93 cm (22 to 36 inch)
vertical motion range
195 cm (77 inch) horizontal scan
range
Low attenuation head holder
Maximum patient weight of 159 kg
(350 lbs.).
Operator's Console, including the
following:
UltraSPARC 60 Workstation with
dual 450 MHz CPUs
1.0 GB main memory
36 GB internal disk storage
4.1 GB erasable optical storage
for archiving image data
CD ROM drive (mounted in desktop
data storage unit)
600 dpi laser printer
Ethernet connection to
acquisition and storage
electronics
4mm DAT (digital audio tape)
archive system
UNIX operating system and
utilities
TCP/IP and network file system
communication software.
Floppy drive
21 inch color monitor
ECAT Software version 7.2
features, including iterative
reconstruction, segmented
attenuation correction, and the
whole body protocol.
ECAT Standard Software:
Image Acquisition:
Transmission scan
Static emission scan
Dynamic emission scan
Acquisition protocols
Image reconstruction and
processing
Wide variety of reconstruction
filters
Image size and displacement
parameters
Calculated or measured
attenuation correction.
Display Software:
Window-oriented to allow
simultaneous acquisition,
reconstruction, data processing
and image display
Image zoom and magnification
Multi-image static display
Any oblique data re-orientation
Cine mode display
78
<PAGE>
PART NUMBER ITEM & DESCRIPTION US LIST PRICE
----------- ------------------ -------------
Multiple plane dynamic displays
Region of interest and image
profiles
Image filtering, summing and
arithmetic
Regions of interest and image
statistics
Screen save/restore operations
Image labeling with variable
fonts and graphics
Interactive color translation
table operations
Three-dimensional volume
interactive data review
(transverse, sagittal and coronal
displays).
Utilities Software:
Patient database
Patient data archive
Motion control
System calibration
System normalization
Performance tests
System diagnostics.
Educational Software:
Multi-media educational package
LPP (Let's Play PET) for use on
separate Macintosh or ICON (not
provided with system).
Systems Documentation (1 set):
ECAT scanner software manual
ECAT scanner hardware manual.
66 block detectors
4224 Lutetium oxyorthosilicate
(LSO) crystals
16.2 cm (6.4 inch) axial field of
view
Simultaneous acquisition of up to
47 contiguous slices
3D acquisition and reconstruction
Vertical and horizontal motion
patient handling system
Data acquisition and electronics
ECAT software
Operator's console.
---------------------------------------------------------------------------------------
*
800026 GANTRY MOUNTING PLATE/ART SERIES
---------------------------------------------------------------------------------------
*
800006 ISOLATION TRANSFORMER (US+JAPAN)
Transformer for isolating ECAT
power from line power.
---------------------------------------------------------------------------------------
*
800005 ISOLATION TRANSFORMER (EUROPE)
Transformer for isolating ECAT
power from line power.
* Omitted information is the subject of a request for confidential treatment
pursuant to Rule 406 under the Securities Act of 1933 and has been filed
separately with the Securities and Exchange Commission.
79
<PAGE>
PART NUMBER ITEM & DESCRIPTION US LIST PRICE
----------- ------------------ -------------
*
800014 ERASABLE OPTICAL DISK
Additional 2.6 GB erasable
optical disk drive for storing
data and images at a UltraSPARC
Remote Workstation. UltraSPARC
Remote Workstation option
required for purchase of this
option.
---------------------------------------------------------------------------------------
*
800016 CARDIAC GATING
Gating trigger input, ECG monitor
and ECAT electronics for
performing cardiac gating.
---------------------------------------------------------------------------------------
*
800018 EDUCATIONAL SOFTWARE LPP
Multimedia educational package
LPP (Let's Play PET) for use on
separate Macintosh, ICON, or PC.
(Macintosh, ICON, or PC not
provided with system.)
---------------------------------------------------------------------------------------
*
800015 256MB RTS MEMORY EXPANSION
Additional real-time sorter
memory expansion. Up to 1
additional memory module may be
ordered for up to 512 MB total
RTS memory.
---------------------------------------------------------------------------------------
*
800012 ULTRA SPARC REMOTE WORKSTATION
UltraSPARC remote workstation for
7.2 systems. Includes the
following or better:
UltraSPARC 60 1300
500 MB RAM memory
36 GB disk
20" monitor
CD drive
floppy drive
ECAT software version 7.2
Solaris 2.6 operating system
IDL 5.0 runtime license
---------------------------------------------------------------------------------------
*
800020 SUBLIMAL DYE & FILM IMAGER
ECAT Codonics medical diagnostic
imager (NP-1660M-CTI-01)
configuration including dye
diffusion/direct thermal dual
mode color and greyscale output.
Configuration comes equipped with
dye diffusion ribbon, 8.5" x 11"
paper (100 sheets) and tray and
8" x 10" clear base film (100
sheets) and tray. Also includes
postscript and DICOM support.
Hardware provided for network
connection to ECAT network.
* Omitted information is the subject of a request for confidential treatment
pursuant to Rule 406 under the Securities Act of 1933 and has been filed
separately with the Securities and Exchange Commission.
80
<PAGE>
PART NUMBER ITEM & DESCRIPTION US LIST PRICE
----------- ------------------ -------------
*
800057 EMERGE SOURCES KIT (1ST FILLING)
Calibration and transmission
sources for the ECAT EMERGE.
These sources are to be purchased
with a new ECAT EMERGE scanner
order. Sources consist of the
following:
1 LS-ART Set-up Source
1 CS-ART Uniform Phantom
1 Phantom Shield
1 set of Cs-137 Point Sources
---------------------------------------------------------------------------------------
*
800019 REMOTE DIAGNOSTICS MODEM - ISDN
ISDN modem for ECAT remote
diagnostics, for use by the ECAT
service engineer and ECAT
Technical Support.
---------------------------------------------------------------------------------------
*
800021 UNINTERRUPTIBLE POWER SUPPLY
Uninterruptible Power Supply
(UPS) option providing 10 minutes
of back up power enabling proper
shut down of system in the event
of power loss. Specifications:
6.0 KVA, 120/240 Volts, 50/60
Hertz.
US only.
---------------------------------------------------------------------------------------
*
800059 EMERGE DOCUMENTATION
One set EMERGE service
documentation and users' manuals.
---------------------------------------------------------------------------------------
*
800037 REMOTE START FOOTSWITCH
Footswitch for starting scan
acquisitions remotely from the
console workstation without the
necessity of pressing the remote
start button on the gantry
control panel. Most commonly
used for performing studies where
dose injection is administered
from the rear of the gantry and
when employing very short-lived
isotopes. The footswitch is
connected to the scanner gantry
through the gantry entrance
panel, located on bottom port
side. Footswitch is supplied
with 10 ft cable. A sound is
reported when the footswitch is
depressed. Maximum of two
footswitches may be ordered per
scanner. Requires version 7.2
software.
* Omitted information is the subject of a request for confidential treatment
pursuant to Rule 406 under the Securities Act of 1933 and has been filed
separately with the Securities and Exchange Commission.
81
<PAGE>
PART NUMBER ITEM & DESCRIPTION US LIST PRICE
----------- ------------------ -------------
*
800013 ULTRASPARC DISPLAY WORKSTATION
An UltraSPARC 10 workstation
configured primarily for
display. Includes the following
or better:
- Ultra10 440MHz UltraSPARC II
processor
- 256 MB RAM memory
- 20 GB hard drive
-32X CD-ROM
- Floppy drive, keyboard, and
mouse
- 21 inch color monitor
- ECAT Software version 7.2
- IDL 5.0 runtime license
---------------------------------------------------------------------------------------
*
800039 SURGE SUPRESSOR - US ONLY
Single phase, 240 VAC, AC power
panel surge protection system to
protect from transient over
voltages.
US only.
---------------------------------------------------------------------------------------
*
800058 EMERGE SOURCES KIT (REPLACEMENT)
Calibration sources for the ECAT
EMERGE. These sources are to be
purchased on an annual basis.
Sources consist of the following:
1 LS-LA Set-up rod
1 CS-20-1 Low Activity Uniform
Phantom
---------------------------------------------------------------------------------------
*
800045 PERFORMANCE TESTING
ECAT ART and EMERGE: 3D axial
resolution, 3D transaxial
resolution, 3D sensitivity, 3D
uniformity, and 3D count rate
performed according to NEMA.
Modifications, changes or
additions to these tests subject
to factory approval and
quotation. All radioisotopes
(e.g. Flourine-18) to be provided
by the site.
ECAT EXACT, ACCEL and HR+: 2D
and 3D axial resolution, 2D and
3D transaxial resolution, 2D and
3D sensitivity, 2D and 3D
uniformity, and 3D count rate
performed according to NEMA.
Modifications, changes or
additions to these tests subject
to factory approval and
quotation. All radioisotopes
(e.g. Flourine-18) to be provided
by the site.
---------------------------------------------------------------------------------------
*
800048 PET APPLICATIONS TRAINING (PER
DAY)
Operator's training for ECAT
Scanners performed by
applications specialist.
Scheduling for training available
upon request. Standard 7.2
software training consists of 3
working days. New scanner
installation training consists of
five to ten working days.
* Omitted information is the subject of a request for confidential treatment
pursuant to Rule 406 under the Securities Act of 1933 and has been filed
separately with the Securities and Exchange Commission.
82
<PAGE>
EXHIBIT B
Prohibited Subdistributors
G.E. Medical Systems, Inc.
Phillips Medical Systems, Inc.
Shimadzu Corporation or any of its subsidiaries
Toshiba Corporation Medical Systems Company (Toshiba shall not be prohibited
from serving as a subdistributor in the country of Japan only)
Marconi Medical Systems, Inc.
83
<PAGE>
EXHIBIT C
Customer Sales Agreement
TERMS AND CONDITIONS OF SALE
1. GENERAL
1.1 Contract Terms. These terms and conditions institute an
integral part of any offer made by Siemens Medical Systems, Inc. ("Siemens") to
sell products (Products) to Purchaser and shall govern the sale of the
Projects. Siemens objects to any additional of different terms. The Products
may be new, used or refurbished and warranted like new. Purchaser acknowledges
that this is a commercial and not a consumer transaction.
1.2 Acceptance. An order shall be binding on Siemens only after a
credit approval and an order confirmation have been issued by Siemens from one
of its district offices. Acceptance is expressly made conditional on
Purchaser's acceptance of these terms and conditions. Any variation in these
terms and conditions including, but not limited to, the inclusion of
Purchaser's own terms and conditions of purchase in any PO issued by Purchaser
in response to and/or referencing Siemens' quotation) shall not be deemed to be
a part of this Agreement and shall not be binding upon Siemens, and acceptance
of delivery of the Products shall constitute Purchaser's acceptance of Siemens'
terms and conditions.
2. PRICES
2.1 Quotations. Unless otherwise agreed to in writing or set
forth in the quotation, all prices quoted by Siemens are based in U.S. dollars
F.O.B. Destination, Freight Prepaid and Billed, and include standard and
customary packaging. Unless otherwise stated, the quotation shall only be valid
for forth-five (45) days from the date of the quotation.
2.2 Delay in Acceptance of Delivery. Should the agreed delivery
date be postponed by Purchaser, Siemens shall have the right to deliver to
storage at Purchaser's risk and expense, and payments due upon delivery shall
become due when Siemens is ready to deliver.
2.3 Escalation. Unless otherwise agreed to in writing, except as
to goods to be delivered within twelve (12) months of Siemens' acceptance of
Purchaser's order, Siemens reserves the right to increase its prices to those
in effect at the time of shipment.
3. TAXES
3.1 Any sales, use of manufacturer's tax which may be imposed
upon the sale or use of Projects, or any property tax levied after readiness to
ship, or any excise tax, license or similar price required under this
transaction, shall be in addition to the quoted prices and shall be paid by
Purchaser.
1
<PAGE>
4. TERMS OF PAYMENT
4.1 Due Date. Siemens' payment terms are as follows: an initial
deposition of 10% of the purchase price for each Product is due upon submission
of the purchase order, an additional 80% of the purchase price is due upon
delivery of each Product, and the ADDITIONAL (?) 10% of the purchase price is
due upon completion of installation. Unless otherwise agreed, all payments
other than the initial deposit are due net thirty (30) days from the date of
invoice. Partial shipments shall be billed as made, the payments for such
shipments will be made in accordance with the foregoing payment terms.
4.2 Late Payment. A service charge of 1 1/2% per month, not to
exceed the maximum rate allowed by law, shall be made on any portion of
Purchaser's outstanding balance which is not paid within thirty (30) days after
invoice date.
4.3 Where Payment Upon Installation or Completion. Should any
special terms of payment provide for either full or partial payment upon
installation or completion of installation or thereafter, and the installation
or completion is delayed for any reason for which Siemens is not responsible,
the Products shall be deemed installed upon delivery and, if not other terms
were agreed upon in writing signed by the parties, the balance of payments
shall be due no later than three (3) months from delivery regardless of the
actual installation date.
5. EXPORT TERMS
5.1 Unless other arrangements have been made, payment on export
orders shall be made by irrevocable confirmed letter of credit, payable in U.S.
dollars against Siemens' invoice and standard shipping documents. Such letter
of credit shall be in an amount equal to the full purchase price of the
Products and shall be established in a U.S. bank acceptable to Siemens.
Purchaser shall procure all necessary permits and licenses for shipment and
compliance with any governmental regulations concerning notice of final
destination of Products.
6. DELIVERY, RISK OF LOSS
6.1 Delivery Date. Delivery and completion schedules are
approximate only and are based on conditions at the time of acceptance of
Purchaser's order by Siemens. Partial shipments may be made.
6.2 Risk of Loss, Title. Unless otherwise agreed to in writing,
delivery shall be complete upon transfer of possession to common carrier,
F.O.B. Destination, Prepaid and Billed, whereupon all risk of loss, damage to
or destruction of the Products shall pass to Purchaser. Title to the Products
shall pass to Purchaser only upon Siemens' receipt of full payment therefore.
2
<PAGE>
7. SECURITY INTEREST/FILING
7.1 Siemens shall have a purchase month security interest in the
Products (and all proceeds thereof) until payment in full by Purchaser.
Purchaser agrees that an original or photocopy of this Agreement (including any
addenda, attachments of amendments hereto) may be filed by Siemens as a Uniform
Commercial Code financing statement. In addition, Purchaser irrevocably
appoints Siemens its agent and attorney-in-fact to execute in Purchaser's name
and file all U.C.C. financing statements deemed necessary by Siemens to protect
its interest in the Products.
8. CHANGES, CANCELLATION, AND RETURN
8.1 Orders accepted by Siemens are not subject to change except
upon written agreement.
8.2 Orders accepted by Siemens are noncancellable by Purchaser
except upon Siemens' written consent and payment by Purchaser of Siemens'
reasonable cancellation charges not to exceed 25% of the price of the affected
Products. In no event can an order be cancelled by Purchaser or Products be
returned to Siemens after shipment has been made.
8.3 Siemens shall have the right to change the manufacture and/or
design of its Products if, in the judgment of Siemens, such change does not
alter the general function of to the Products.
9. FORCE MAJEURE
9.1 Siemens will make every effort to complete shipment, and
installation where indicated, but shall not be liable for any loss or damage
for delay in delivery or inability to install due to causes beyond its
reasonable control, including, but not limited to, acts of government or
compliance with any governmental rules or regulations. Should such a delay
occur, Siemens may reasonably extend delivery or production schedules, or at
its option, cancel the order in whole or part without liability other than to
return any unearned deposit or prepayment.
10. WARRANTY
10.1 Siemens warrants that the Products manufactured by Siemens
and sold hereunder shall be free from defects in material or workmanship under
normal use and service for the period set forth in the attached or accompanying
Siemens Warranty covering the Product. The warranty period shall commence on
the date that the Products have been installed in accordance with 12.6 hereof,
which date shall be confirmed in writing by Siemens. Siemens makes no warranty
for any Products made by persons other than Siemens or its affiliates, and
Purchaser's sole warranty therefore, if any, is the original manufacturer's
warranty, which Siemens agrees to pass on to Purchaser, as applicable.
3
<PAGE>
10.2 No warranty extended by Siemens shall apply to any Products
which have been modified, altered, or repaired by persons other than those
authorized or approved by Siemens. Siemens' obligation under this warranty is
limited to the repair ore replacement, at Siemens' option, of defective parts.
Repair or replacement Products may be new, used or refurbished and warranted
like new. Repairs or replacement deliveries shall not interrupt, extend or
prolong the term of this warranty. Siemens' warranty does not apply to
consumable materials, except as specifically stated in writing, nor to products
or parts thereof supplied by Purchaser.
10.3 This warranty is made on condition that immediate warranty
notice of any defect be given to Siemens and the Siemens inspection reveals
that the Purchaser's claim is valid under the terms of this warranty.
10.4 Warranty service will be provided without charge during
Siemens' regular working hours (8:30-5:00), Monday through Friday, except
Siemens' recognized holidays. If Purchaser requires that service be performed
other than during these times, such service can be made available at an
additional charge, at Siemens' then current rates.
SIEMENS MAKES NO WARRATY OTHER THAN THE ONE SET FORTH HEREIN OR THAT WHICH MAY
BE PROVIDED IN A SEPARATE WARRANTY COVERING THE APPLICABLE PRODUCT CATEGORY.
SUCH WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
BUT NOT LIMITED TO ANY EXPESS OR IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS
FOR PARTICULAR PURPOSES, AND SUCH CONSTITUTES THE ONLY WARRANTY MADE WITH
RESPECT TO THE PRODUCTS.
11. LIMITATION OF LIABILITY
11.1 In no event shall Siemens' liability hereunder exceed the
actual loss or damage sustained by Purchaser, up to the purchase price of the
Products.
11.2 SIEMENS SHALL NOT BE LIABLE FOR ANY LOSS OF USE, REVENUE OR
ANTICIPATED PROFITS, LOSS OF STORED, OR TRANSMITTED OR RECORDED DATA, OR FOR
ANY INCIDENTAL, UNFORESEEN, SPECIAL PUNITIVE OR CONSEQUENTIAL DAMAGES ARISING
OUT OF OR IN CONNECTION WITH THIS AGREEMENT OR THE SALE OR USE OF THE PRODUCTS.
This provision does not affect third party claims for personal injury arising
as a result of Siemens' negligence or product defect. THE FOREGOING IS A
SEPARATE, ESSENTIAL TRM OF THIS AGREEMENT AND SHALL BE EFFECTIVE UPON THE
FAILURE OF ANY REMEDY, EXCLUSIVE OR OT.
4
<PAGE>
12. INSTALLATION - ADDITIONAL CHARGES
12.1 General. Unless otherwise expressly stipulated in writing,
the Products covered hereby shall be installed by and at the expense of Siemens
except for rigging charges which shall be the responsibility of Purchaser.
12.2 Installation by Siemens. If Siemens specifies it will install
the Products, the following applies: Subject to fulfillment of the obligations
set forth in 12.4 below, Siemens shall install the products covered hereby and
connect same to the requisite safety switches and power lines to be installed
by Purchaser. Except as otherwise specified below, if such installation and
connection are performed by Siemens technical personnel, prices shown include
the most thereof, provided that the installation and connection can be
performed within the continental United States or Puerto Rico and during normal
business hours. Any overtime charges or other special expenses shall be
additional charges to the prices shown.
12.3 Trade Unions. If a trade union, or unions, prevents Siemens
from performing the above work, the Purchaser shall make all required
arrangements with the trade union, or unions, to permit Siemens completion of
said work. Moreover, any additional cost related to such labor disputes shall
be paid by the Purchaser and Siemens' obligations under such circumstances will
be limited to providing engineering supervision of installation and connection
of Siemens equipment to existing wiring.
12.4 Purchaser's Obligations. Purchaser shall, at its expense,
provide all proper and necessary labor and materials for plumbing service,
carpentry work, conduit wiring, and other preparations required for such
installation and connection. All such labor and materials shall be completed
and available at the time of delivery of the Products by Siemens. Additionally,
the Purchaser shall provide free access to the premises of installation and, if
necessary, safe and secure space thereon for storage of Products and Equipment
prior to installation by Siemens. If any special work of any type must be
performed in order to comply with requirements of any governmental authority
including procurement of special certificates, permits and approvals, the same
shall be performed or procured by Purchaser at Purchaser's expense. Purchaser
shall provide a suitable environment for the Products and shall ensure, at its
sole cost and expense, that is premises are free of asbestos, hazardous
conditions and any concealed dangerous conditions and that all site
requirements are met. In the event that Siemens is requested to supervise the
installation of the Products, it remains the Purchaser's responsibility to
comply with local regulations. Siemens is not an architect and all drawings
furnished by Siemens are not construction drawings.
12.5 Regulatory Reporting. In the event that any regulatory
activity is performed by other Siemens authorized personnel, Purchaser shall be
responsible for fulfilling any and all reporting requirements. Siemens shall
only report activity performed by its authorized personnel.
5
<PAGE>
12.6 Completion of Installation. Installation shall be complete
upon the conclusion of final calibration and checkout under Siemens standard
procedures to verify that the Products meet applicable written performance
specifications. Notwithstanding the foregoing, first use of the Products by
Purchaser, is agents or employees for any purpose after delivery shall
constitute completion of installation.
13. PATENT, TRADEMARK AND OTHER INFRINGEMENT CLAIMS
13.1 Infringement by Siemens. If Purchaser receives a claim that
any product, or parts thereof, infringe upon the rights of others under patent,
trademark or otherwise, Purchaser shall notify Siemens immediately in writing.
As to all infringement claims relating to Products or parts
manufactured by Siemens or one of its affiliates:
(a) Purchaser shall give Siemens information, assistance and
exclusive authority to evaluate, defend and settle such claims.
(b) Siemens shall then, at its own expense, defend or settle such
claims, procure for the Purchaser the right to use the Products, or remove or
modify them to avoid infringement. If none of these alternatives is available
on terms reasonable to Siemens, then Purchaser shall return the Products to
Siemens and Siemens shall refund to Purchaser the purchase price paid by the
Purchaser less reasonable depreciation for Purchasers use of the Products.
13.2 Infringement by Purchaser. If some or all of the products
sold hereunder are made by Siemens pursuant to drawings or specifications
furnished by the Purchaser, or if Purchaser modifies or combines, operates or
uses the Products with any product, data, software, apparatus or program not
provided or approved by Siemens, and should a claim be made that such Products
infringe the rights of any third party under patent, trademark or otherwise,
then Purchaser shall indemnify and hold Siemens harmless against any liability
or expense, including reasonable attorneys' fees, incurred by Siemens in
connection therewith.
14. DESIGNS AND TRADE SECRETS/LICENSE
14.1 Any drawings, data, designs, software programs or other
technical information supplied by Siemens to Purchaser in connection with the
sale of the Products are not included in the sale of the Products to Purchaser,
shall remain Siemens' property and shall at all times be held in confidence by
Purchaser. Such information shall not be reproduced or disclosed to others
without Siemens' prior written consent.
14.2 For all goods purchased hereunder which utilize software for
their operation, such "Applications Software" shall be licensed to Purchaser
under the terms of Siemens' Software License Schedule as attached hereto.
6
<PAGE>
14.3 Diagnostic/Maintenance Software is not included under 14.2
above, is available only as a special option under a separate Diagnostic
Materials License Agreement and is subject to a separate licensing fee.
15. ASSIGNMENT
15.1 Neither party may assign any rights or obligations under this
Agreement without the written consent of the other and any attempt to do so
shall be void, except that Siemens may assign this Agreement without consent to
any subsidiary or affiliated company.
16. DAMAGES, COSTS AND FEES
16.1 In the event that any dispute or difference is brought
arising from or relating to this Agreement or the breach, termination or
validity thereof, the prevailing party shall NOT be entitled to recover from
the other party any punitive damages. The prevailing party shall be entitled to
recover from the other party all reasonable attorneys fees incurred, together
with such other expenses, costs and disbursements as may be allowed by law.
17. MODIFICATION
17.1 This Agreement may not be changed, modified or amended except
in writing signed by duly authorized representatives of the parties.
18. GOVERNING LAW
18.1 THIS AGREEMENT SHALL BE GOVERNED BY THE LAWS OF THE STATE OF
NEW JERSEY. THE APPROPRIATE COUNTY OR STATE COURTS OF THE STATE OF NEW JERSEY
AND THE FEDERAL COURTS HAVING JURISDICTION THEREOVER WILL HAVE JURISDICTION OF
ANY AND ALL ACTIONS ARISING FROM THIS AGREEMENT.
19. INTEGRATION
19.1 THESE TERMS AND CONDITIONS, INCLUDING ANY ATTACHMENTS OR
OTHER DOCUMENTS INCORPORATED BY REFERENCE HEREIN, CONSTITUTE THE ENTIRE
AGREEMENT AND THE COMPLETE AND EXCLUSIVE STATEMENT OF AGREEMENT WITH RESPECT TO
THE SUBJECT MATTER HEREOF.
20. SEVERABILITY; HEADINGS
20.1 No provision of this Agreement which may be deemed
unenforceable will in any way invalidate any other portion or provision of this
Agreement. Section headings are for convenience only and will have no
substantive effect.
7
<PAGE>
21. WAIVER
21.1 No failure and no delay in exercising, on the part of any
party, any right under this Agreement will operate as a waiver thereof, nor
will any single or partial exercise of any right preclude the further exercise
of any other right.
22. END USER CERTIFICATION
22.1 Purchaser represents, warrants and covenants that it is
acquiring the Products for its own end use and not for reselling, leasing or
transferring to a third party (except for lease-back financings).
8
<PAGE>
SOFTWARE LICENCE SCHEDULE TO THE SIEMENS MEDICAL SYSTEMS, INC.
TERMS AND CONDITIONS OF SALE
1. DEFINITIONS: The following definitions apply to this
Schedule:
This Agreement shall mean Siemens Quotation for Products and Services including
the Terms and Conditions of Sale and applicable schedules.
Siemens shall mean Siemens Medical Systems, Inc., a Delaware corporation.
License shall mean the end-user to whom Siemens provides Software or
Documentation for internal use under the Agreement.
Software shall mean (i) software programs consisting of a series of statements
or instructions to be used directly or indirectly in a programmable controller
or computer to bring about a certain result and (ii) databases consisting of
systemized connections of data to be used or referenced directly or indirectly
by a programmed controller or computer. Notwithstanding the foregoing, software
does not include firmware as such term is conventionally understood.
Documentation shall mean the documents and other supporting materials which are
intended to support the use of an associated product, including (but not
limited to) instructions, descriptions, flow charts, logic diagrams and
listings of the Software, in text or graphic form, on machine readable or
printed media.
Designed Unit shall mean a single control unit or computer identified in the
Agreement on which Software licensed hereunder may be used by Licensee.
2. SCOPE: The following terms and conditions shall apply to all
Software and Documentation provided by Siemens to Licensee under the Agreement
(whether included with other products listed in the Agreement or listed
separately in the Agreement), together with any updates or revisions thereto
which Siemens may provide to Licensee, and all copies thereof, except (i) any
Software and/or Documentation licensed directly by Siemens licensor or supplier
under a separate end-user license agreement accompanying the Software or the
Documentation, in which case Licensee agrees to be bound by that license
agreement as a condition to using the Software and/or Documentation, in which
case Licensee agrees to be bound by that license agreement as a condition to
using the Software and/or Documentation, and (ii) any Software and/or
Documentation referred to under Section 14.3 of the Terms and Conditions of
Sale. Except as expressly provided herein, and provided that in no event shall
the warranties or other obligations of Siemens with respect to such Software or
Documentation exceed those set forth in this Schedule, this Schedule shall be
subject to the liability limitations and exclusions and other terms and
conditions set forth in the Agreement.
3. SOFTWARE AND DOCUMENTATION LICENSE: Subject to the payment of
the applicable license fee(s), whether stated separately or included in the
purchase price of another product, Siemens or, if applicable, its licensor,
hereby grants to Licensee a paid-up, nonexclusive and nontransferable (except
as expressly provided in
<PAGE>
this Schedule) limited license to use the Software provided by Siemens under
the Agreement solely for Licensees own use on the Designated Unit and to use
the Documentation in support of Licensees authorized use of the Software. A
separate license is required for each control unit or computer on which the
Software is to be used. Licensee may copy the Software licensed hereunder for
backup and archival purposes only as necessary to support Licensees own
authorized use of the Software and only if Licensee reproduces and includes on
or in all copies (in any form) all copyright, trade secret or other proprietary
notices contained on or in the Software as provided by Siemens. Additional
copies of the Documentation may be licensed from Siemens at its then applicable
charges. Licensee may make the Software and Documentation (including any
copies) available only to its employees and other persons on Licensees premises
to whom such disclosure is necessary to enable Licensee to use the Software or
Documentation within the scope of the license provided in this Schedule. If the
Software is supplied to any unit or agency of the United States Government
other than the Department of Defense, the Software and Documentation are
classified as restricted computer software and the Governments rights in the
Software and Documentation shall be as provided in paragraph (c)(2) of the
Commercial Computer Software-Restricted Rights clause in FAR 52.227-19 and any
successor laws, rules or regulations thereto. If the Software is supplied to
the United States Department of Defense, the Software is classified as
commercial computer software and the Government is furnished the Software and
Documentation with restricted rights as defined in paragraph (c)(1) of the
Rights in Technical Data and Computer Software clause in DFARS 252.227-7013 and
any successor laws, rules or regulations thereto.
4. PROPRIETARY PROTECTION AND CONFIDENTIALITY: Except as
expressly permitted by this Schedule, Licensee shall not (i) remove any
copyright, trade secret or other proprietary right notices contained on or in
the Software or Documentation as provided by Siemens, (ii) reproduce or modify
any Software or Documentation or copy thereof, (iii) reverse assemble, reverse
engineer or decompile any Software, or copy thereof, in whole or in part
(except as provided by applicable law), or (iv) sell, transfer or otherwise
make available to others the Software or Documentation, or any copy thereof.
Licensee shall secure and protect the Software and Documentation and copies
thereof from disclosure and shall take such actions with its employees and
other persons who are permitted access to the Software or Documentation or
copies as may be necessary to satisfy Licensees obligations hereunder. Prior to
disposing of any computer medium, computer memory or data storage apparatus,
Licensee shall ensure that all copies of Software and Documentation have been
erased therefrom or otherwise destroyed. In the even that Licensee becomes
aware that any Software or Documentation or copies are being used in a manner
not permitted by the license, Licensee shall immediately notify Siemens in
writing of such fact and if the person or persons so using the Software or
Documentation are employed or otherwise subject to Licensees direction and
control, Licensee shall use reasonable efforts to terminate such impermissible
use. Licensees obligations under this paragraph shall survive any termination
of a license or the Agreement.
5. UPDATES AND REVISIONS: During the warranty period or under a
separate service contract, revised or updated versions of the Software licensed
under this
2
<PAGE>
Schedule may be made available, at Siemens option, to Licensee to use or to
these while Licensee continues use of a previous version. Licensee has the
right to decide whether to install any such revised or updated versions or to
continue use of the previous version after giving due regard to the United
States Food and Drug Administration rules and regulations. However, Licensee
shall pay Siemens for any services necessitated by any modifications of the
Software by Licensee or by Licensees failure to utilize the current
non-investigational version of the Software provided by Siemens.
6. DELIVERY, RISK OF LOSS AND TITLE: Notwithstanding the
provisions of Section 6 of the Terms and Conditions of sale, the Software and
Documentation licensed hereunder shall be delivered on or about the delivery
date stated in the Agreement unless a separate delivery date is agreed upon. If
Software or Documentation licensed hereunder is lost or damaged during shipment
from Siemens, Siemens will replace it at no charge to Licensee. If any Software
or Documentation supplied by Siemens and licensed hereunder is lost or damaged
while in the possession of the Licensee, Siemens will replace it at Siemens
then current applicable charges, if any, for materials, processing and
distribution. Notwithstanding the provisions of Section 6 of the Terms and
Conditions of Sale, the Software and Documentation, in any form, and all copies
made by Licensee, including partial copies, and all computer media provided by
Siemens are and remain the property of Siemens or its licensor. Licensee has no
right, title or interest in the Software, the Documentation, or any computer
media provided by Siemens, or copies, except as stated herein.
7. LICENSE TRANSFER: The Software and Documentation, and the
license hereunder, may not be assigned, transferred or sublicensed except as
hereinafter provided. Upon the sale or lease of the Designated Unit to a third
party, Licensee may transfer to such third party, with Siemens written consent
and in accordance with Siemens the current policies and charges, the license to
use the Software hereunder, together with the Software, the Documentation, the
computer media provided by Siemens, and all copies provided that: (i) Licensee
notifies Siemens in writing of the name and address of such third party; (ii)
such third party agrees in a written instrument delivered to Siemens to the
terms of this Schedule; and (iii) Licensee does not retain any copies of the
Software or Documentation in any form.
8. WARRANTIES: This paragraph replaces Paragraphs 10.1 and 10.4
of the Terms and Conditions of Sale with respect to Software and Documentation.
Siemens warrants that for the warranty period provided by Siemens with respect
to the Designated Unit, the Software shall conform in all material respects to
Siemens published specifications as contained in the applicable Supporting
Documentation. Such Documentation may be updated by Siemens from time to time
and such updates may constitute a change in specification. Licensee
acknowledges that he Software is of such complexity that it may have inherent
or latent effects. As licensees sole remedy under the warranty, Siemens will
provide services, during the warranty period, to correct Documented Software
errors which Siemens analysis indicates are caused by a defect in the
unmodified version of the Software as provided by Siemens. Siemens does not
warrant that the Software will meet the Licensees requirements, or will operate
in combinations which may be selected for use by Licensee, or that the
operation of the
3
<PAGE>
Software will be uninterrupted or error free. Licensee is responsible for
determining the appropriate use of and establishing the limitations of the
software and its associated Documentation as well as the results obtained by
use thereof.
SIEMENS MAKES NO OTHER WARRANTY WITH RESPECT TO THE SOFTWARE AND DOCUMENTATION
OTHER THAN THOSE SET FORTH IN THIS SECTION. THE WARRANTY HEREIN IS IN LIEU OF
ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY
EXPRESS OR IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE, AND CONSTITUTES THE ONLY WARRANTY MADE WITH RESPECT TOT HE SOFTWARE
AND DOCUMENTATION.
9. LICENSE TERM AND TERMINATION: The license for the Software
and Documentation is effective on the shipment date of the Software and
Documentation (F.O.B. shipping point or F.A.S., as the case may be) and
continues until Licensees possession of the Software and all copies ceases
(except in connection with a transfer of the license as permitted by this
Schedule) or until otherwise terminated as provided herein. Licensee may
terminate the license for the Software and Documentation at any time after
discontinuance of use of the Software and Documentation and all copies, upon
written notice to Siemens. If Licensee (i) fails to comply with its obligations
herein and does not cure such failure within ten (10) days after receipt of
notice from Siemens, or (ii) attempts to assign this Schedule or any rights or
obligations hereunder without Siemens prior written consent, then Siemens may
terminate the license hereunder and require the immediate discontinuance of all
use of the Software and Documentation and all copies thereof in any form,
including modified versions and updated works. Within five (5) days after the
termination of the license, Licensee shall, at Siemens option either: (i)
return to Siemens the Software and Documentation, and all copies, in any form,
including updated versions, along with any computer media provided by Siemens;
or (ii) destroy the affected Software and Documentation, and all copies, in any
form, including updated versions, and certify such return or destruction in
writing to Siemens.
4
<PAGE>
EXHIBIT D
Transfer Prices Percentages
DISTRIBUTOR'S TRANSFER PRICE PERCENTAGES FOR CPS PET SCANNER UNDER A
NON-EXCLUSIVE DISTRIBUTION AGREEMENT
U.S.A.
-------------------------------------------------------------------------------------------------------
1 - 25 units 26 - 50 units 51 - 100 units > 100 units
------------------- ------------------- ------------------- -------------------
in US$ Transfer in % of Transfer In % of Transfer in % of Transfer in % of
price list price list price list price list
-------- ------- -------- ------- -------- ------- -------- -------
ART * % * % * % * %
EXACT 47 * % * % * % * %
ACCEL * % * % * % * %
HR+ * % * % * % * %
BGO & LSO * % * % * % * %
PET/CT
Options * % * % * % * %
Emerge * % * % * % * %
R.O.W.
-------------------------------------------------------------------------------------------------------
1 - 25 units 26 - 50 units 51 - 100 units > 100 units
------------------- ------------------- ------------------- -------------------
in US$ Transfer in % of Transfer In % of Transfer in % of Transfer in % of
price list price list price list price list
-------- ------- -------- ------- -------- ------- -------- -------
ART * % * % * % * %
EXACT 47 * % * % * % * %
ACCEL * % * % * % * %
HR+ * % * % * % * %
BGO & LSO * % * % * % * %
PET/CT
EMERGE * % * % * % * %
Options * % * % * % * %
* Omitted information is the subject of a request for confidential treatment
pursuant to Rule 406 under the Securities Act of 1933 and has been filed
separately with the Securities and Exchange Commission.
85
<PAGE>
EXHIBIT E
Forecast Format
CTI PET SYSTEMS, INC.
TWELVE MONTH ROLLING FORECAST
10/1/01
MONTH OCT-01 NOV-01 DEC-01 JAN-02 FEB-02 MARCH-02 APRIL-02 MAY-02 JUNE-02 JULY-02 AUG-02 SEPT-02 TOTAL
------ ------ ------ ------ ------ -------- -------- ------ ------- ------- ------ ------- -----
BOOKINGS
ART 0
EXACT 0
ACCEL 0
HR+ 0
------ ------ ------ ------ ------ -------- -------- ------ ------- ------- ------ ------- -----
TOTAL 0 0 0 0 0 0 0 0 0 0 0 0 0
SHIPMENTS
ART 0
EXACT 0
ACCEL 0
HR+ 0
------ ------ ------ ------ ------ -------- -------- ------ ------- ------- ------ ------- -----
TOTAL 0 0 0 0 0 0 0 0 0 0 0 0 0
86
<PAGE>
EXHIBIT F
Packaging and Labeling
"SHIPPING TERMS AND PACKAGING"
1. Standard Labeling. The following internationally recognized symbols shall be
affixed to all outside shipping containers that cannot be removed by harsh
weather or humidity. Labeling can be spray painted with stencil or with a decal:
a. "Do Not Freeze"
b. "Keep Dry"
c. "Fragile"
d. "Handle with Care"
e. (Up Arrows)
f. "Do not Stack" (if items can be stacked on top of the crate,
then you must mark the maximum weight in pounds and kilos
allowed)
2. Standard Indicators and Markings. The following indicators and markings shall
be affixed to all outside shipping containers that cannot be removed by harsh
weather or humidity. Markings must be spray painted with stencil:
a. Center of Gravity markings on all outside shipping containers
b. "Shockwatch" or "Telatip" indicators on applicable containers
c. Markings with an arrow indicating where fork lift drivers can
place the forks under pallets and crates
d. Temperature parameters for storage during transportation on
applicable containers
3. Other Labels and Markings. Any additional labels and markings required by the
Distributor will be provided with or indicated on individual purchase orders
submitted by Distributor. Placement of all markings shall be done in a uniform
fashion for every shipping container where permissible. If the placement of any
of these aforementioned items is critical to the Distributor, this will be
communicated separately on an as needed basis.
4. Packing List. A Detailed Packing List (DPL) must be provided with every
shipment indicating the individual weights (in pounds & kilos) and dimensions
(in inches & centimeters) of every shipping container. The DPL must detail all
items in the shipment, in which containers those items are packed, and indicate
which parent item they belong to. The parent item are the line items ordered on
the Distributor's Purchase Order. A copy of the DPL must be included with the
physical shipment. In addition, a copy must be sent to the Distributor's Order
Logistics department. Upon request, for special export requirements, vendor must
supply Distributor with an electronic copy of the DPL in the native format it
was created.
These requirements apply to both domestic and international shipments unless
otherwise specified.
87
<PAGE>
EXHIBIT G
Warranty, Installation, Applications and
Technical Support Specifications and Prices
CTI PET SYSTEMS, INC.
ECAT SERVICE SUPPORT PRICE LIST
PART NUMBER ITEM US LIST PRICE
----------- ---- -------------
CALL SUPPORT
*
3999900-00 APPLICATIONS AND TECHNICAL SUPPORT CONTRACT
Provide 24X7 access to CPS applications and technical support
personnel. Coverage is per site per year. Includes remote diagnostic
where available. If the technical support personnel determine that
additional on-site assistance is required to complete the service
incident the proper service entity will be notified to complete the
call. It is not the intention to utilize this function to troubleshoot
all field service problems, but as a tool to utilize when reasonable
efforts have been made to resolve the problem through field service
personnel.
*
3999900-01 APPLICATIONS AND TECHNICAL TELEPHONE SUPPORT CONTRACT
Provide 24X7 access to CPS applications and technical support
personnel. Coverage is per site per year. Excludes remote
diagnostics. If the technical support personnel determine that
additional on-site assistance is required to complete the service
incident the proper service entity will be notified to complete the
call. It is not the intention to utilize this function to troubleshoot
all field service problems, but as a tool to utilize when reasonable
efforts have been made to resolve the problem through field service
personnel.
*
PER CALL
Provide applications and technical support on a per call basis.
Excludes remote diagnostics. If the technical support personnel
determine that additional on-site assistance is required to complete
the service incident the proper service entity will be notified to
complete the call. It is not the intention to utilize this function to
troubleshoot all field service problems, but as a tool to utilize when
reasonable efforts have been made to resolve the problem through field
service personnel.
* Omitted information is the subject of a request for confidential treatment
pursuant to Rule 406 under the Securities Act of 1933 and has been filed
separately with the Securities and Exchange Commission.
88
<PAGE>
CTI PET SYSTEMS, INC.
ECAT SERVICE SUPPORT PRICE LIST
PART NUMBER ITEM US LIST PRICE
----------- ---- -------------
APPLICATIONS SUPPORT
*
3999901-00 APPLICATIONS TURNOVER CUSTOMER TRAINING
A four day training program to be performed concurrently (Monday
through Friday). The training is to provide system training for up to
three CNMT trained technologists or physicians. Training will be taught
in accordance with CPS guidelines. System Acceptance Testing will be
demonstrated and completed as part of the training. At completion of
training the System Acceptance documentation and sign off by the
customer will be completed and supplied to the Customer and the
Distributor or their agent. Completion of the Acceptance Documentation
is the responsibility of the Distributor.
*
3999902-00 ADDITIONAL TRAINING DAYS
Minimum * days (* hours) and excludes expenses to be billed
separately.
*
3999903-00 PERFORMANCE TESTING
Onsite performance testing, including 2D and 3D axial resolution, 2D
and 3D transaxial resolution, 2D and 3D sensitivity, 2D and 3D
uniformity, and 3D count rate performed according to NEMA.
Modifications, changes or additions to these tests subject to factory
approval and quotation. All radioisotopes (e.g. Flourine-18) to be
provided by the site. Work is performed with customer representative,
and three days onsite are supplied to complete testing. Documentation
will be supplied to the Customer to demonstrate system specification
compliance.
*
TECHNICAL SUPPORT
*
3999904-00 ONSITE ASSISTANCE
Minimum * days (* hours) and excludes expenses to be billed
separately. Provide on-site technical assistance to resolve service
incidents that are beyond the ability of the field service personnel to
resolve. Dispatch of a Technical Support Engineer will occur when
reasonable efforts have been made to resolve the incident via telephone
support and at the sole discretion of the appropriate CPS manager.
*
INSTALLATION SUPPORT
*
3999905-00 EXACT, HR+, ACCEL, ART NEW SYSTEM INSTALLATION,
CONTINENTAL UNITED STATES
Supplied upon notification of site readiness by Distributor or their
agent. Failure to provide site readiness can result in delays and
additional costs for Distributor. This service includes mechanical and
electrical connection of basic PET system, source installation and
basic PET scanner system start-up and testing to meet factory
specifications. Installation and testing of system options to meet
* Omitted information is the subject of a request for confidential treatment
pursuant to Rule 406 under the Securities Act of 1933 and has been filed
separately with the Securities and Exchange Commission.
89
<PAGE>
CTI PET SYSTEMS, INC.
ECAT SERVICE SUPPORT PRICE LIST
PART NUMBER ITEM US LIST PRICE
----------- ---- -------------
factory specifications will be supplied at additional cost. Completion
of Distributor supplied installation documentation and system turnover
to Distributor or assigned agent will complete installation.
*
3999906-00 EXACT, HR+, ACCEL, ART NEW SYSTEM INSTALLATION, INTERNATIONAL
Supplied upon notification of site readiness by Distributor or their
agent. Failure to provide site readiness can result in delays and
additional costs for Distributor. This service includes mechanical and
electrical connection of basic PET system, source installation and
basic PET scanner system start-up and testing to meet factory
specifications. Installation and testing of system options to meet
factory specifications will be supplied at additional cost. Completion
of Distributor supplied installation documentation and system turnover
to Distributor or assigned agent will complete installation.
*
PROJECT MANAGEMENT
*
3999907-00 PROJECT PLANNING, COMPLETE
A CPS Project Specialist will work with the Customer or their agent to
finalize site layout and system requirements in accordance to the
related Planning Guide. A Final Site Plan will typically be generated
in conjunction with this service. Site readiness will be reviewed and
signed off prior to shipment of the system by a qualified CPS
representative. Supplied as part of this service is up to three (3)
on-site trips to meet with the customer or their agents to review
construction plans and schedules. Coordination of the pre-installation
kit, sources and shipment/rigging of the system will be managed by the
CPS Project Specialist.
*
3999907-01 PROJECT PLANNING, PRELIMINARY
A CPS Project Specialist will travel to the Customer site and review
building layout with Customer or their agent. A Planning Guide and a
set of typical drawings will be supplied to the Customer and a review
of siting requirements will be performed with follow up of requested
information. A Preliminary Site Plan will typically be generated in
conjunction with this service.
* Omitted information is the subject of a request for confidential treatment
pursuant to Rule 406 under the Securities Act of 1933 and has been filed
separately with the Securities and Exchange Commission.
90
<PAGE>
CTI PET SYSTEMS, INC.
ECAT SERVICE SUPPORT PRICE LIST
PART NUMBER ITEM US LIST PRICE
----------- ---- -------------
*
3999908-00 SITE PLANS, COMPLETE
Complete drawing set with final siting requirements corresponding to
customer supplied architectural drawings and in accordance with the
related Planning Guide. Includes preliminary site plans and up to 3
revisions of drawings. A one-week turn around time is customary for
each revision. All drawings will be reviewed by a CPS Project
Specialist and will only be sent to the Distributor or his agent for
dissemination to the Customer. It is the Distributor's responsibility
to ensure the Customer completes sign-off of final drawings.
*
3999908-01 SITE PLANS, PRELIMINARY
Initial room layout drawings and typical drawings corresponding to
initial siting information and in accordance with the related Planning
Guide. This is typically provided for prospective customers and
requires room dimensions to be supplied by Distributor. All drawings
will be reviewed by a CPS Project Specialist and will only be sent to
the Distributor or his agent for dissemination to the Customer. A
one-week turn around time is customary.
*
SPECIAL HANDLING
*
3999909-00 ECAT SEA-FREIGHT PACKAGING
Packaging for scanner sea-freight shipping.
*
SERVICE, LABOR ONLY
To be contracted with CPS, Inc. and is due to availability of resources
in requested geographical area. Pricing subject to change.
PER CALL
*
REGULAR HOURLY RATE
* *
* *
* *
*
PER PERIOD PER SITE
Coverage is for one site and includes an obligation to respond as if
under a service agreement with a 1/2 hour phone response and a 4-hour
on-site response. This covers 8 AM to 5 PM, Monday through Friday.
Service outside this will be billed on a per call basis.
* Omitted information is the subject of a request for confidential treatment
pursuant to Rule 406 under the Securities Act of 1933 and has been filed
separately with the Securities and Exchange Commission.
91
<PAGE>
CTI PET SYSTEMS, INC.
ECAT SERVICE SUPPORT PRICE LIST
PART NUMBER ITEM US LIST PRICE
----------- ---- -------------
3999910-00 Weekly *
3999910-01 Monthly *
3999910-02 6 Month *
3999910-03 1 Year *
*
TECHNICAL TRAINING
*
3999911-00 EXACT, HR+, ACCEL, ART FIELD SERVICE ENGINEER
Technical training of the Service Engineers and selected customers
in scanner and computer architecture, troubleshooting, installation
and preventative maintenance. Tuition includes hotel, all printed
material, and classroom supplies.
*
TECHNICAL DOCUMENTATION
*
3999912-00 EXACT, HR+, ACCEL, ART DOCUMENTATION SET
User and technical documentation.
* Omitted information is the subject of a request for confidential treatment
pursuant to Rule 406 under the Securities Act of 1933 and has been filed
separately with the Securities and Exchange Commission.
92
<PAGE>
EXHIBIT H
Spare Parts
ECAT SPARE/SERVICE COMPONENTS PROCEDURES
As with previous distributions, the spare/service part listing has been modified
to reflect our current level of component availability, removal of items not
shipped during the last two years and additions to accommodate product needs.
Should there be a requirement for components which are not on this revised list,
quotations will be provided on a case-by-case basis. In all likelihood, such
items will not be available on an SD/P-1* basis. Orders for such components will
not be accepted or processed without written approval by either the Spare Parts
Manager or the ECAT Systems Engineering Manager.
*SD/P1 means the system is down and every effort will be made to expedite these
orders as Priority One.
The following guidelines/procedures are used for spare/service/warranty
components and are provided as a matter of information:
> All sales and all shipments will be at the Transfer Price
established by Section 5(b) of the Agreement to which this
Exhibit is attached.. Components may be new or reconditioned,
at the discretion of CPS.
> Except as set forth below, credit for returns (per the current
spare parts price list) will be issued within 30 days of
receipt of the returned component provided, of course, that
there is no visible physical damage to the component and also
provided that the component is returned within 30 days from
the date a component is shipped to Distributor in the U.S. and
60 days from the date a component is shipped to Distributor
outside the United States.
[NOTE: NO CREDIT WILL BE GIVEN FOR USED COMPONENTS
RETURNED FROM FIELD UPGRADES (E.G., ACS II UPGRADES)
SINCE THESE ARE OPTIONS ORDERED BY THE CUSTOMER.]
93
<PAGE>
> Parts warranty is for six months from the date of shipment and
covers material and workmanship. The same part originally
shipped must be returned for warranty credit to be issued.
Warranty credit for returned components will be issued
following the same guidelines as provided above for field
returns. That is, full credit will be provided within thirty
(30) days of receipt of the returned component provided there
is no physical damage due to handling, packaging or shipping
upon the component's arrival and provided that the appropriate
documentation is included with the shipment. The shipment must
arrive within thirty (30) days from the date of the service
report from sites in the U.S. or within sixty (60) days of the
service report from international sites to be eligible for
return credit.
> The minimum order requirement of $ * remains in effect.
> A fee of $ * will be added to the invoice for each "SD/P1"
shipment.
> A fee of $ * will be added to the invoice for each
"PRIORITY/EMERGENCY - NEXT FLIGHT OUT" shipment.
> A * % restocking fee, or a minimum of $ *, will be assessed
for components returned as "'wrong part ordered" or "refused
upon delivery". A credit memo will be issued within 30 days
after receipt of the material which must be returned in unused
condition, in the original package, via prepaid
transportation, within 30 days of the factory shipment date.
> Stock orders are non-returnable. A * % cancellation fee will
be assess for cancelled stock orders.
> OBSOLESCENCE SCHEDULE:
MODEL SPARE COMPONENTS WILL BE PROVIDED THROUGH...
ECAT 951 NOVEMBER 29, 2003
ECAT 953 MARCH 30, 2002
ECAT EXACT 10 YEARS FROM MANUFACTURE DATE OF FINAL UNIT
ECAT EXACT HR 10 YEARS FROM MANUFACTURE DATE OF FINAL UNIT
ECAT EXACT HR+ 10 YEARS FROM MANUFACTURE DATE OF FINAL UNIT
ART 10 YEARS FROM MANUFACTURE DATE OF FINAL UNIT
WHILE WE WILL MAKE EVERY EFFORT TO NOTIFY APPROPRIATE PARTIES IN ADVANCE, THESE
POLICIES ARE SUBJECT TO CHANGE WITHOUT NOTICE.
* Omitted information is the subject of a request for confidential treatment
pursuant to Rule 406 under the Securities Act of 1933 and has been filed
separately with the Securities and Exchange Commission.
94
<PAGE>
ECAT SERVICE/SPARE PARTS PRICE LIST
OCTOBER 2001
TRANSFER
REQUIRED WORLD PRICE TO CREDIT
SIEMENS LEAD TIME BASE DISTRIBUTOR FOR
CTI PART # PART # DESCRIPTION WHERE USED (# WEEKS) PRICE (50% DISC) RETURNS
------------------------------------------------------------------------------------------------------------------------------------
0030001-00 3050499 LAMP INCAND 2.7V FLANGE BASE #338 95x * * * *
------------------------------------------------------------------------------------------------------------------------------------
0050038-06 3545345 RELAY DPDT 24V IN 10A 150V DC KUEP SERIES 012 BED * * * *
------------------------------------------------------------------------------------------------------------------------------------
0090006-01 35 49 271 Optical Splitter ART * * * *
------------------------------------------------------------------------------------------------------------------------------------
0090006-02 35 47 109 Combiner Box Optical Comm. System ART * * * *
------------------------------------------------------------------------------------------------------------------------------------
0090006-03 3547077 TRANSMITTER OPTICAL SLIPRING COMM SYS ART * * * *
------------------------------------------------------------------------------------------------------------------------------------
0090006-04 3547051 RECEIVER OPTICAL SLIPRING COMM SYSTEM ART * * * *
------------------------------------------------------------------------------------------------------------------------------------
0250022-02 3553402 LIGHT SOURCE MTG W/O MTG CLIP (prev * * * *
0250022-01)
------------------------------------------------------------------------------------------------------------------------------------
0820008-00 3551236 XFMR ISO 5.0KW IP 100-240 VAC OP 120/240V CE Compliance Kit * * * *
------------------------------------------------------------------------------------------------------------------------------------
0830013-00 4AT36 TRANSFORMER ISOLATION 400V PRIMARYA AC EU CE COMPLIANCE KIT * * * *
------------------------------------------------------------------------------------------------------------------------------------
0920024-02 3549370 LENSE FLAT TRANSLUCENT BLK RECT FOR -01 EXACT,HR,ART,HR+ * * * *
------------------------------------------------------------------------------------------------------------------------------------
0960017-02 2978281 BULB REPLACEMENT 24V INCAND. 0960017-01 953 * * * *
------------------------------------------------------------------------------------------------------------------------------------
0960026-05 35 45 501 Vertical Limit Switch ART, EXACT * * * *
------------------------------------------------------------------------------------------------------------------------------------
0980013-00 1555965 SW MICRO ROLLER LEVER 95x,921 * * * *
------------------------------------------------------------------------------------------------------------------------------------
0980024-00 2950538 SWITCH PHOTOINTERRUPTER #GP1A10 95x,921,ART * * * *
------------------------------------------------------------------------------------------------------------------------------------
* Omitted information is the subject of a request for confidential treatment
pursuant to Rule 406 under the Securities Act of 1933 and has been filed
separately with the Securities and Exchange Commission.
95
<PAGE>
TRANSFER
REQUIRED WORLD PRICE TO CREDIT
SIEMENS LEAD TIME BASE DISTRIBUTOR FOR
CTI PART # PART # DESCRIPTION WHERE USED (# WEEKS) PRICE (50% DISC) RETURNS
------------------------------------------------------------------------------------------------------------------------------------
0980058-00 35 49 248 Switch Plunger Snap In ART * * * *
------------------------------------------------------------------------------------------------------------------------------------
0980063-02 3549347 MICRO SWITCH 5V @ 1MA DPDT #B2-2R72-A2 VERTICAL BED * * * *
------------------------------------------------------------------------------------------------------------------------------------
1300518-00 3551608 SEAL LINE SOURCE 921,961,HR+,ART * * * *
------------------------------------------------------------------------------------------------------------------------------------
1300520-00 3551624 HANDLE BUCKET 95X * * * *
------------------------------------------------------------------------------------------------------------------------------------
1300712-02 3550626 SOURCE CARRIER 951/931 * * * *
------------------------------------------------------------------------------------------------------------------------------------
1300786-02 CARRIER SOURCE 953-31 6.00" 953 * * * *
------------------------------------------------------------------------------------------------------------------------------------
1300851-00 3552168 PIN LATCH DETAIL 953 * * * *
------------------------------------------------------------------------------------------------------------------------------------
1300991-00 3545493 PLUNGER FRICTION ROD SOURCE GEAR 921 EXACT * * * *
------------------------------------------------------------------------------------------------------------------------------------
1302161-03 2951643 TUNNEL 921/36 921 * * * *
------------------------------------------------------------------------------------------------------------------------------------
1302206-00 1761373 LASER TUNNEL 951R 951 * * * *
------------------------------------------------------------------------------------------------------------------------------------
1302209-00 2952690 SPACER FAN 921 921 * * * *
------------------------------------------------------------------------------------------------------------------------------------
1302437-00 3551632 RING GEAR INTERNAL EXACT,HR,HR+ * * * *
------------------------------------------------------------------------------------------------------------------------------------
1302520-00 3550394 ROD END 921 * * * *
------------------------------------------------------------------------------------------------------------------------------------
1302543-00 3548752 CLAMP GEAR RING 951,921,961 * * * *
------------------------------------------------------------------------------------------------------------------------------------
1302630-00 3547648 FAN MODIFICATION MF/5630023-00 ACS CABINET * * * *
------------------------------------------------------------------------------------------------------------------------------------
1302660-00 3549453 SHAFT MOUNTING ACTUATOR 0-12 BED VERTICAL BED * * * *
------------------------------------------------------------------------------------------------------------------------------------
1302690-00 3550584 RAIL ATTACHMENT EXACT,HR,ART,HR+ * * * *
------------------------------------------------------------------------------------------------------------------------------------
1302765-01 BRACKET MTG LEFT LEVELING FOOT 921,961 * * * *
------------------------------------------------------------------------------------------------------------------------------------
1302765-02 3552556 BRACKET MTG RIGHT LEVELING FOOT VERTICAL BED,ART * * * *
------------------------------------------------------------------------------------------------------------------------------------
1302775-00 3552564 PAD LEVELING MODIFIED VERTICAL BED * * * *
------------------------------------------------------------------------------------------------------------------------------------
1302838-00 3548810 ROLLER ENCODER ART * * * *
------------------------------------------------------------------------------------------------------------------------------------
1302915-00 3550410 CAP SOURCE EXACT,HR,HR+ * * * *
------------------------------------------------------------------------------------------------------------------------------------
1310053-00 2950546 CRADLE PALLET SUPPORT EXACT,HR * * * *
------------------------------------------------------------------------------------------------------------------------------------
1630174-00 3551301 BRACKET GANTRY DOOR 953 * * * *
------------------------------------------------------------------------------------------------------------------------------------
1630469-00 3552374 PLATE FILLER PANEL ACS CABINET * * * *
------------------------------------------------------------------------------------------------------------------------------------
1630482-00 3552382 PANEL DRIVE FILLER ACS CABINET,921,961 * * * *
------------------------------------------------------------------------------------------------------------------------------------
1790004-00 3551665 SW PROD ECAT V7.0 REL0 EXACT,HR,ART,HR+ * * * *
------------------------------------------------------------------------------------------------------------------------------------
1790006-00 3552572 S/W PRODUCT ECAT V 7.02B * * * *
------------------------------------------------------------------------------------------------------------------------------------
1790007-00 3552580 SW PROD ECAT V7.0.3 * * * *
------------------------------------------------------------------------------------------------------------------------------------
1790009-00 SW PATCH P7.0.3-1 * * * *
------------------------------------------------------------------------------------------------------------------------------------
* Omitted information is the subject of a request for confidential treatment
pursuant to Rule 406 under the Securities Act of 1933 and has been filed
separately with the Securities and Exchange Commission.
96
<PAGE>
TRANSFER
REQUIRED WORLD PRICE TO CREDIT
SIEMENS LEAD TIME BASE DISTRIBUTOR FOR
CTI PART # PART # DESCRIPTION WHERE USED (# WEEKS) PRICE (50% DISC) RETURNS
------------------------------------------------------------------------------------------------------------------------------------
2010003-03 3545022 CONN PLUG CBL/PNL 4P SOCKET 953 * * * *
------------------------------------------------------------------------------------------------------------------------------------
2050001-00 3552135 CONN RECEPT KIT 10KVDC 1P PIN 951 * * * *
------------------------------------------------------------------------------------------------------------------------------------
2140044-00 3547945 TERMINATOR SCSI MALE/FEMALE ACS * * * *
------------------------------------------------------------------------------------------------------------------------------------
2290011-04 3549446 ROLLER 1 1/2" DIA 80 DUROMETER URETHANE EXACT,HR,ART,HR+ * * * *
------------------------------------------------------------------------------------------------------------------------------------
2300010-02 3550378 BEARING SINGLE ROW RADIAL 2SEAL #9102PP 93X,95X * * * *
------------------------------------------------------------------------------------------------------------------------------------
2310023-00 1760557 Belt 92.925 Circumference #FRS-630 951 * * * *
------------------------------------------------------------------------------------------------------------------------------------
2310028-38 2950561 CHAIN CABLE .25PITCH #25CCF-486-E HR,HR+ * * * *
------------------------------------------------------------------------------------------------------------------------------------
2310042-07 3545204 BELT TIMING PITCH 1/2" PITCH 1" WIDE 921,961,ART, HR+ * * * *
------------------------------------------------------------------------------------------------------------------------------------
2310043-01 35 53 737 Chain 14.75"L .1475 Pitch ART * * * *
------------------------------------------------------------------------------------------------------------------------------------
2310043-02 35 53 745 Link Connecting Snaptype ART * * * *
------------------------------------------------------------------------------------------------------------------------------------
2360031-01 3548760 SPRING COMP .036"OD 1/2"L MUSIC WIRE EXACT,BED,HR+ * * * *
------------------------------------------------------------------------------------------------------------------------------------
2370004-02 3549461 RING RETAINING 1/2" #5160-50 VERTICAL BED * * * *
------------------------------------------------------------------------------------------------------------------------------------
2380019-00 3548604 TURCITE BONDING SYS STRIP .032 951 * * * *
------------------------------------------------------------------------------------------------------------------------------------
2390033-00 3549701 GASKET RF SHIELD CLIP ON BRIGHT FINISH ART * * * *
------------------------------------------------------------------------------------------------------------------------------------
2390033-01 3545485 RF GASKET MATERIAL FOR LASER TUNNELS HR+ * * * *
------------------------------------------------------------------------------------------------------------------------------------
2500008-04 2954555 FILTER, FAN-S MEDIA ONLY #09450-M/30 921,961 * * * *
------------------------------------------------------------------------------------------------------------------------------------
2500008-09 3548885 VME SUBRACK/POWER SUPPLY #10897-564 ACS II UPGRADE * * * *
------------------------------------------------------------------------------------------------------------------------------------
2500020-00 3551343 CARDCAGE VME 21 SLOT #11-1008224 921, 961 * * * *
------------------------------------------------------------------------------------------------------------------------------------
2530037-00 3551327 STUD ASM SELF EJECT TYPE SE - MIN BUY $ 951 * * * *
------------------------------------------------------------------------------------------------------------------------------------
2530077-00 3550949 LATCH ADJ GRIP SLOTTED FLUSH HEAD HR+ * * * *
------------------------------------------------------------------------------------------------------------------------------------
2600460-03 3549040 SCR #10-32 X 3/4"L CAPTIVE PANEL BRASS ART * * * *
------------------------------------------------------------------------------------------------------------------------------------
2640025-07 3549693 FSTNR TUFLOCK REMOVABLE PUSH-TYPE RIVET VERTICAL BED * * * *
------------------------------------------------------------------------------------------------------------------------------------
2670084-08 3549032 STANDOFF 3/8" HEX 1 3/8"L 10-32 F/F BRASS ART * * * *
------------------------------------------------------------------------------------------------------------------------------------
2921001-11 2952757 HEAT EXCHANGER - LG - DBL FAN UNIT #6320G3AN 921,961 * * * *
------------------------------------------------------------------------------------------------------------------------------------
2960005-02 3549867 PUMP/MOTOR TURBINE FILTRINE CHILLER CHILLER * * * *
------------------------------------------------------------------------------------------------------------------------------------
2960005-03 3551509 TEMPERATURE CONTROLLER-FILTRINE CHILLER CHILLER * * * *
------------------------------------------------------------------------------------------------------------------------------------
2960012-00 3552051 CHILLER WATER TO WATER CHILLER * * * *
------------------------------------------------------------------------------------------------------------------------------------
3000005-01 2951981 ASM CABLE CLOCK & CONTROL 14 FT 93X,95X * * * *
------------------------------------------------------------------------------------------------------------------------------------
3000060-01 2976129 ASM CBL BUCKET PWR PIGTAIL 93X,95X 93X,95X * * * *
------------------------------------------------------------------------------------------------------------------------------------
* Omitted information is the subject of a request for confidential treatment
pursuant to Rule 406 under the Securities Act of 1933 and has been filed
separately with the Securities and Exchange Commission.
97
<PAGE>
TRANSFER
REQUIRED WORLD PRICE TO CREDIT
SIEMENS LEAD TIME BASE DISTRIBUTOR FOR
CTI PART # PART # DESCRIPTION WHERE USED (# WEEKS) PRICE (50% DISC) RETURNS
------------------------------------------------------------------------------------------------------------------------------------
3000085-00 4788907 ASM CABLE CONSOLE/MAINTENANCE 93X,95X * * * *
------------------------------------------------------------------------------------------------------------------------------------
3000265-01 2952773 ASM CABLE ETHERNET COAX 12' 921 * * * *
------------------------------------------------------------------------------------------------------------------------------------
3000290-00 2951866 ASM CABLE RTS II INTERCONNECT 95X,921 * * * *
------------------------------------------------------------------------------------------------------------------------------------
3000346-00 3548968 ASM CABLE GANTRY BRKT TO CONTROL PANEL 921,961 * * * *
------------------------------------------------------------------------------------------------------------------------------------
3000362-00 2979644 ASM CABLE RTS SCSI RIBBON 921 921 * * * *
------------------------------------------------------------------------------------------------------------------------------------
3000368-00 2954167 ASM CABLE 2-COND FIBER OPTIC 921 921 * * * *
------------------------------------------------------------------------------------------------------------------------------------
3000379-00 2975519 ASM CABLE DATA H R 14' 961 * * * *
------------------------------------------------------------------------------------------------------------------------------------
3000380-00 2975527 ASM CABLE CLOCK/DATA H/R 14' 961 * * * *
------------------------------------------------------------------------------------------------------------------------------------
3000385-00 2975535 ASM CABLE CLOCK 24 COND HR 921,961 * * * *
------------------------------------------------------------------------------------------------------------------------------------
3000396-00 2954589 ASM CABLE H.V. BUCKET HR 961,ART * * * *
------------------------------------------------------------------------------------------------------------------------------------
3000397-00 3547747 ASM CABLE BUCKET PWR PIGTAIL HR 47 EXACT,HR * * * *
------------------------------------------------------------------------------------------------------------------------------------
3000446-00 2978067 ASM CABLE ARTECON * * * *
------------------------------------------------------------------------------------------------------------------------------------
3000454-00 2979867 ASM CABLE SUN SCSI 921 * * * *
------------------------------------------------------------------------------------------------------------------------------------
3000486-00 3545188 Asm Cable Clutch Pigtail Vertical Bed * * * *
------------------------------------------------------------------------------------------------------------------------------------
3000490-00 3547226 ASM CABLE PANEL FRONT ACS II/RTS ACS II UPGRADE * * * *
------------------------------------------------------------------------------------------------------------------------------------
3000491-00 3547739 ASM CABLE DATA HR HR,HR+ * * * *
------------------------------------------------------------------------------------------------------------------------------------
3000493-00 3547721 ASM CABLE CLOCK 16 CONDUCTOR HR HR,HR+ * * * *
------------------------------------------------------------------------------------------------------------------------------------
3000501-00 3546681 ASM CABLE CLOCK 24 COND ART ART * * * *
------------------------------------------------------------------------------------------------------------------------------------
3000574-01 3551202 ASM CABLE SEPTA MOTOR 921,961 * * * *
------------------------------------------------------------------------------------------------------------------------------------
3100000-01 4788501 ASM PWB PHANTOM POSITION 93X, 95X 93X,95X * * * *
------------------------------------------------------------------------------------------------------------------------------------
3100008-00 4788519 ASM PWB SERVO POSITION 911, 93X, 95X 911,93X,95X * * * *
------------------------------------------------------------------------------------------------------------------------------------
3100017-00 4788527 ASM PWB WOBBLE & GATING DISTRIBUTION 93X,95X * * * *
------------------------------------------------------------------------------------------------------------------------------------
3100042-00 4788212 ASM PWB CLOCK DISTRIBUTION 93X,95X * * * *
------------------------------------------------------------------------------------------------------------------------------------
3100043-00 4788220 ASM PWB CLOCK FANOUT 93X,95X * * * *
------------------------------------------------------------------------------------------------------------------------------------
3100064-00 4789061 ASM PWB BED CONTROL S15 93X,95X * * * *
------------------------------------------------------------------------------------------------------------------------------------
3100065-00 4789012 ASM PWB RETRACTABLE RING SOURCE 93X,95X * * * *
------------------------------------------------------------------------------------------------------------------------------------
3100081-00 9909177 ASM PWB RING RECEIVER 933/953 933,953 * * * *
------------------------------------------------------------------------------------------------------------------------------------
3100089-00 9907395 ASM PWB 951 ANALOG SIGNAL PROCESSOR 951 * * * *
------------------------------------------------------------------------------------------------------------------------------------
3100090-00 9907403 ASM PWB 951 POSITION/ENERGY PROCESSOR 951 * * * *
------------------------------------------------------------------------------------------------------------------------------------
3100091-00 9907411 ASM PWB BUCKET CONTROLLER 851,95X * * * *
------------------------------------------------------------------------------------------------------------------------------------
* Omitted information is the subject of a request for confidential treatment
pursuant to Rule 406 under the Securities Act of 1933 and has been filed
separately with the Securities and Exchange Commission.
98
<PAGE>
TRANSFER
REQUIRED WORLD PRICE TO CREDIT
SIEMENS LEAD TIME BASE DISTRIBUTOR FOR
CTI PART # PART # DESCRIPTION WHERE USED (# WEEKS) PRICE (50% DISC) RETURNS
------------------------------------------------------------------------------------------------------------------------------------
3100092-01 9907346 ASM PWB 951 IP COINCIDENCE S20 951 * * * *
------------------------------------------------------------------------------------------------------------------------------------
3100092-02 9909185 ASM PWB 953 IP COINCIDENCE S20 953 * * * *
------------------------------------------------------------------------------------------------------------------------------------
3100095-01 1557953 ASM PWB RTS FORMATTER II 951 951 * * * *
------------------------------------------------------------------------------------------------------------------------------------
3100095-02 1559801 ASM PWB RTS FORMATTER II 953 953 * * * *
------------------------------------------------------------------------------------------------------------------------------------
3100097-00 9907452 ASM PWB VME ARBITER 951 * * * *
------------------------------------------------------------------------------------------------------------------------------------
3100102-00 1555833 ASM PWB MIZAR COMMUNICATIONS INTERFACE 951 * * * *
------------------------------------------------------------------------------------------------------------------------------------
3100103-00 1557946 ASM PWB RTS SORTER II 95X * * * *
------------------------------------------------------------------------------------------------------------------------------------
3100115-00 1560734 ASM PWB RETRACTABLE ROD SOURCE 953B 95x * * * *
------------------------------------------------------------------------------------------------------------------------------------
3100115-01 1560742 ASM PWB RETRACTABLE RING SOURCE 951/953 95X * * * *
------------------------------------------------------------------------------------------------------------------------------------
3100125-01 2952781 ASM PWB GANTRY CONTROLLER 921 921 * * * *
------------------------------------------------------------------------------------------------------------------------------------
3100126-00 2950686 ASM PWB RTS COINCIDENCE INPUT 921,961 * * * *
------------------------------------------------------------------------------------------------------------------------------------
3100127-00 1761175 ASM PWB 921 ANALOG PROCESSOR 921 * * * *
------------------------------------------------------------------------------------------------------------------------------------
3100128-00 2950280 ASM PWB POSITION/ENERGY PROCESSOR 921 921 * * * *
------------------------------------------------------------------------------------------------------------------------------------
3100129-00 1764849 ASM PWB BUCKET CONTROLLER 921 921 * * * *
------------------------------------------------------------------------------------------------------------------------------------
3100138-00 2950702 ASM PWB 1000 PLANE SORTER 921 * * * *
------------------------------------------------------------------------------------------------------------------------------------
3100139-00 2950728 ASM PWB 921 ARBITER/SERIAL INTERFACE 921 * * * *
------------------------------------------------------------------------------------------------------------------------------------
3100139-01 3547952 ASM PWB ARBITER/SERIAL INTERFACE PRT HR,HR+ * * * *
------------------------------------------------------------------------------------------------------------------------------------
3100140-00 2950744 ASM PWB FORMATTER 1000 PLANE 921 * * * *
------------------------------------------------------------------------------------------------------------------------------------
3100141-00 2950769 ASM PWB GANTRY CONT CLOCK EXPANDER 921 * * * *
------------------------------------------------------------------------------------------------------------------------------------
3100142-01 2950785 ASM PWB COINCIDENCE PROCESSOR 921 * * * *
------------------------------------------------------------------------------------------------------------------------------------
3100142-02 2979271 ASM PWB COINCIDENCE PROC PRODUCTION 2 921 * * * *
------------------------------------------------------------------------------------------------------------------------------------
3100144-02 3548034 ASM PWB 961 ROT ROD CONV ACSII HR,HR+ * * * *
------------------------------------------------------------------------------------------------------------------------------------
3100144-04 3550535 ASM PWB ROTATING ROD CONV 921 W/NEW ELEC & 921 * * * *
ACS
------------------------------------------------------------------------------------------------------------------------------------
3100147-00 2951809 ASM PWB RTS INJECTION MONITOR 1000 PLANE 921 * * * *
------------------------------------------------------------------------------------------------------------------------------------
3100156-00 2954613 ASM PWB GANTRY CONTROLLER HR 961 * * * *
------------------------------------------------------------------------------------------------------------------------------------
3100158-00 2954597 ASM PWB ANALOG PROCESSOR HR 961 * * * *
------------------------------------------------------------------------------------------------------------------------------------
3100159-00 2954605 ASM PWB BUCKET CONTROLLER HR 961 * * * *
------------------------------------------------------------------------------------------------------------------------------------
3100164-00 3546954 ASM PWB GATING INPUT HR EXACT,HR * * * *
------------------------------------------------------------------------------------------------------------------------------------
3100168-01 ASM PWB Cool Plate Temp Sensor 31/47 EXACT * * * *
------------------------------------------------------------------------------------------------------------------------------------
3100175-00 2979719 ASM PWB CONTROLLER READ/WRITE RTS II TESTED 95X * * * *
------------------------------------------------------------------------------------------------------------------------------------
* Omitted information is the subject of a request for confidential treatment
pursuant to Rule 406 under the Securities Act of 1933 and has been filed
separately with the Securities and Exchange Commission.
99
<PAGE>
TRANSFER
REQUIRED WORLD PRICE TO CREDIT
SIEMENS LEAD TIME BASE DISTRIBUTOR FOR
CTI PART # PART # DESCRIPTION WHERE USED (# WEEKS) PRICE (50% DISC) RETURNS
------------------------------------------------------------------------------------------------------------------------------------
3100176-00 2978042 ASM PWB PHOTOINTERRUPTER RIGHT 921 * * * *
------------------------------------------------------------------------------------------------------------------------------------
3100177-00 2978034 ASM PWB PHOTOINTERRUPTER LEFT 921 * * * *
------------------------------------------------------------------------------------------------------------------------------------
3100193-00 3547382 ASM PWB VSB SORTER RTS II TESTED EXACT,HR,HR+ * * * *
------------------------------------------------------------------------------------------------------------------------------------
3100196-00 3550162 ASM PWB MOTION CONTROLLER FAST EXACT,HR,HR+ * * * *
------------------------------------------------------------------------------------------------------------------------------------
3100196-04 3551731 ASM PWB MOTION CONTROL ROD SOURCE 921,961 * * * *
------------------------------------------------------------------------------------------------------------------------------------
3100196-05 3551749 ASM PWB MOTION CONTROL SEPTA 921,961 * * * *
------------------------------------------------------------------------------------------------------------------------------------
3100196-06 3551756 ASM PWB GANTRY CONTROL HORIZ BED BED * * * *
------------------------------------------------------------------------------------------------------------------------------------
3100196-07 3550915 ASM PWB MOTION CONTROL FAST ROD SOURCE 921,HR+ * * * *
------------------------------------------------------------------------------------------------------------------------------------
3100198-00 3545295 ASM PWB DUAL MOTION CONTROLLER 012 BED 921,961,HR+,BED * * * *
------------------------------------------------------------------------------------------------------------------------------------
3100206-01 3549180 ASM PWB FIBER TRANSLATOR HR+ TESTED HR+ * * * *
------------------------------------------------------------------------------------------------------------------------------------
3100206-02 3551335 ASM PWR FIBER TRANSLATOR 921 W/NEW ELEC ACS II, 921 * * * *
------------------------------------------------------------------------------------------------------------------------------------
3100208-00 3546988 ASM PWB COMMUNICATIONS CONTROLLER ART ART * * * *
------------------------------------------------------------------------------------------------------------------------------------
3100209-00 3546830 ASM PWB COINCIDENCE PROCESSOR ART TESTED ART * * * *
------------------------------------------------------------------------------------------------------------------------------------
3100211-01 3550188 ASM PWB BUCKET CONTROLLER P22 EXACT,HR,HR+ * * * *
------------------------------------------------------------------------------------------------------------------------------------
3100213-00 3550196 ASM PWB ANALOG PROCESSOR P20/ART EXACT,HR,HR+ * * * *
------------------------------------------------------------------------------------------------------------------------------------
3100213-01 35 53 315 Analog Processor ART, EXACT * * * *
------------------------------------------------------------------------------------------------------------------------------------
3100213-02 35 53 323 Analog Processor (only for coaxial cables) ART, EXACT * * * *
------------------------------------------------------------------------------------------------------------------------------------
3100216-00 35 49 214 ASM Power Distribution ART * * * *
------------------------------------------------------------------------------------------------------------------------------------
3100218-00 3547440 ASM PWB LOSSLESS COINCIDENCE PROC TESTED 921 * * * *
------------------------------------------------------------------------------------------------------------------------------------
3100222-00 3547366 ASM PW TRANSLATOR ART TESTED EXACT,HR,HR+ * * * *
------------------------------------------------------------------------------------------------------------------------------------
3100228-01 3549586 ASM PWB CTI MOTION CONTROL BED BED * * * *
------------------------------------------------------------------------------------------------------------------------------------
3100267-00 3552309 ASM PWB BUCKET CONTROLLER HV RESISTOR 961 * * * *
------------------------------------------------------------------------------------------------------------------------------------
3100268-00 3552317 ASM PWB ANALOG PROCESSOR HV RESISTOR 921,961,HR+ * * * *
------------------------------------------------------------------------------------------------------------------------------------
3200124-00 4788352 ASM DETECTOR WOBBLE MOTOR 93X,95X * * * *
------------------------------------------------------------------------------------------------------------------------------------
3200125-00 4788600 ASM ROTATING SOURCE MOTOR 93X,95X * * * *
------------------------------------------------------------------------------------------------------------------------------------
3200205-02 1760169 ASM LENSE 951/953-31 953 * * * *
------------------------------------------------------------------------------------------------------------------------------------
3200233-00 2951148 ASM DETECTOR TUBE 3MM SCANNER 831,953 * * * *
------------------------------------------------------------------------------------------------------------------------------------
3200246-00 9907387 ASM DETECTOR CAN 8X8 95X * * * *
------------------------------------------------------------------------------------------------------------------------------------
3200253-00 9907478 ASM RRS FRONT LIMIT SWITCH 951 951 * * * *
------------------------------------------------------------------------------------------------------------------------------------
3200272-01 2954134 ASM GUIDE WHEEL ECCENTRIC 95X * * * *
------------------------------------------------------------------------------------------------------------------------------------
* Omitted information is the subject of a request for confidential treatment
pursuant to Rule 406 under the Securities Act of 1933 and has been filed
separately with the Securities and Exchange Commission.
100
<PAGE>
TRANSFER
REQUIRED WORLD PRICE TO CREDIT
SIEMENS LEAD TIME BASE DISTRIBUTOR FOR
CTI PART # PART # DESCRIPTION WHERE USED (# WEEKS) PRICE (50% DISC) RETURNS
------------------------------------------------------------------------------------------------------------------------------------
3200272-02 2978299 ASM GUIDE WHEEL CONCENTRIC 95X * * * *
------------------------------------------------------------------------------------------------------------------------------------
3200325-00 1556674 ASM Source Drive Motor Mtg 953 * * * *
------------------------------------------------------------------------------------------------------------------------------------
3200348-00 2950843 ASM DETECTOR CAN RND TUBE 20MM EXACT * * * *
------------------------------------------------------------------------------------------------------------------------------------
3200348-02 3550543 ASM DETECTOR CAN RND TUBE 20MM ART ART, EXACT * * * *
------------------------------------------------------------------------------------------------------------------------------------
3200414-00 3551228 ASM LASER ALIGN 951,921 * * * *
------------------------------------------------------------------------------------------------------------------------------------
3200414-01 1760540 should order 3200414-00 95X * * * *
------------------------------------------------------------------------------------------------------------------------------------
3200438-00 2950884 ASM LASER ALIGNMENT 921/36 921 * * * *
------------------------------------------------------------------------------------------------------------------------------------
3200438-01 3548109 ASM LASER ALIGNMENT ART ART * * * *
------------------------------------------------------------------------------------------------------------------------------------
3200476-00 1760870 ASM DETECTOR CAN 3MM 961 * * * *
------------------------------------------------------------------------------------------------------------------------------------
3200477-00 2975634 ASM LASER ALIGNMENT HR 961 * * * *
------------------------------------------------------------------------------------------------------------------------------------
3200541-00 2977820 ASM MOTOR CLUTCH/BRAKE BED PROD 921,961,BED * * * *
------------------------------------------------------------------------------------------------------------------------------------
3200542-02 3551772 ASM LASER TUNNEL 921/36 (PRE-EMI PLASTIC EXACT * * * *
TUNNEL)
------------------------------------------------------------------------------------------------------------------------------------
3200542-03 2977684 ASM LASER TUNNEL 921/47 (PRE-EMI PLASTIC 921 * * * *
TUNNEL)
------------------------------------------------------------------------------------------------------------------------------------
3200549-03 2975659 ASM LASER TUNNEL 961/47 (PRE-EMI PLASTIC 961 * * * *
TUNNEL)
------------------------------------------------------------------------------------------------------------------------------------
3200733-03 3551178 ASM MOUNT BEARING SEPTA EXACT 47 921 * * * *
------------------------------------------------------------------------------------------------------------------------------------
3200777-00 3547697 ASM DETECTOR CAN [P20] HR+ * * * *
------------------------------------------------------------------------------------------------------------------------------------
3200777-01 35 50 667 Detector Block HR+ - Coaxial cable EXACT * * * *
------------------------------------------------------------------------------------------------------------------------------------
3200788-00 3550337 ASM LASER PATIENT POSITIONING HR+ * * * *
------------------------------------------------------------------------------------------------------------------------------------
3200789-00 3551780 ASM LASER TUNNEL-DOMESTIC-HR+ (PRE-EMI) HR+ * * * *
------------------------------------------------------------------------------------------------------------------------------------
3200832-00 3550402 ASM LIMIT SWITCH RING FRONT EXACT * * * *
------------------------------------------------------------------------------------------------------------------------------------
3200861-00 3552218 ASM LASER TUNNEL HR+ (EMI UPGRADE) HR+ * * * *
------------------------------------------------------------------------------------------------------------------------------------
3200973-00 35 53 513 Detector Quad Board ART, EXACT * * * *
------------------------------------------------------------------------------------------------------------------------------------
3230041-01 1760185 ASM FALCON PWB MF/5000000 S15 93X,95X * * * *
------------------------------------------------------------------------------------------------------------------------------------
3230041-02 1760193 ASM FALCON PWB MF/5000000-00 953B 953 * * * *
------------------------------------------------------------------------------------------------------------------------------------
3230056-02 4788881 ASM PROC IM IP300 M/5300003-02 93X,95X * * * *
------------------------------------------------------------------------------------------------------------------------------------
3230079-00 3552119 ASM REAR SOURCE EXPOSED LAMP 953 * * * *
------------------------------------------------------------------------------------------------------------------------------------
3230129-00 9907445 ASM RTS 68020 CPU MIZAR 95X * * * *
------------------------------------------------------------------------------------------------------------------------------------
3230129-01 2951049 ASM RTS MIZAR ACS 68020 CPU 95X * * * *
------------------------------------------------------------------------------------------------------------------------------------
3230129-02 2951783 ASM RTS MIZAR 7124 ACS 921 * * * *
------------------------------------------------------------------------------------------------------------------------------------
3230135-00 3550634 ASM VME FAN TRAY 95X * * * *
------------------------------------------------------------------------------------------------------------------------------------
* Omitted information is the subject of a request for confidential treatment
pursuant to Rule 406 under the Securities Act of 1933 and has been filed
separately with the Securities and Exchange Commission.
101
<PAGE>
TRANSFER
REQUIRED WORLD PRICE TO CREDIT
SIEMENS LEAD TIME BASE DISTRIBUTOR FOR
CTI PART # PART # DESCRIPTION WHERE USED (# WEEKS) PRICE (50% DISC) RETURNS
------------------------------------------------------------------------------------------------------------------------------------
3230139-00 2978679 ASM VME CARD CAGE 95X * * * *
------------------------------------------------------------------------------------------------------------------------------------
3230199-02 2951742 ASM DRIVE SUN FORMAT 670MB SCSI 921 * * * *
------------------------------------------------------------------------------------------------------------------------------------
3230234-00 2951627 ASM GANTRY CONTROL PANEL 921 921, 961 * * * *
------------------------------------------------------------------------------------------------------------------------------------
3230237-00 2952856 ASM SEPTA SWITCH FRONT 921 921 * * * *
------------------------------------------------------------------------------------------------------------------------------------
3230241-00 1243331 ASM STORAGE SYS 592MB 220V 95X * * * *
------------------------------------------------------------------------------------------------------------------------------------
3230241-01 1243323 ASM STORAGE SYS 592MB 110V 95X * * * *
------------------------------------------------------------------------------------------------------------------------------------
3230245-00 2954142 ASM CONSOLE E-STOP 921 921 * * * *
------------------------------------------------------------------------------------------------------------------------------------
3230249-00 2976830 ASM OPTICAL DISK 921 921 * * * *
------------------------------------------------------------------------------------------------------------------------------------
3230250-00 ASM POWER SUPPLY HIGH VOLTAGE * * * *
------------------------------------------------------------------------------------------------------------------------------------
3230268-00 2952872 ASM TAPE DRIVE 8MM 921 * * * *
------------------------------------------------------------------------------------------------------------------------------------
3230269-00 2952898 ASM TAPE DRIVE 1/4" 150MB 961 * * * *
------------------------------------------------------------------------------------------------------------------------------------
3230285-00 2951536 ASM KIT HV=1EC CONVERSION 921 * * * *
------------------------------------------------------------------------------------------------------------------------------------
3230300-00 2950991 ASM ENCODER SPUR GEAR 921,961 * * * *
------------------------------------------------------------------------------------------------------------------------------------
3230300-01 3548836 ASM ENCODER SPUR GEAR ART ART * * * *
------------------------------------------------------------------------------------------------------------------------------------
3230302-00 2951015 ASM SEPTA GEAR MOTOR EXACT,HR * * * *
------------------------------------------------------------------------------------------------------------------------------------
3230320-00 3550956 ASM PWR SUPPLY HIGH VOLTAGE HR HR/HR+ * * * *
------------------------------------------------------------------------------------------------------------------------------------
3230321-00 1794879 ASM FILTRINE CHILLER OPTION 921/961 * * * *
------------------------------------------------------------------------------------------------------------------------------------
3230329-00 2952948 ASM ZERO LIMIT SWITCH 921,961 * * * *
------------------------------------------------------------------------------------------------------------------------------------
3230330-00 2952955 ASM GANTRY E-STOP LH 921,961 * * * *
------------------------------------------------------------------------------------------------------------------------------------
3230331-00 2952963 ASM GANTRY E-STOP RH 961 * * * *
------------------------------------------------------------------------------------------------------------------------------------
3230336-00 2977218 ASM DRIVE ACS FORMAT 1.2GB SCSI 921,961 * * * *
------------------------------------------------------------------------------------------------------------------------------------
3230341-01 2979222 ASM COOL PLATE TEMP SENSOR 31/47 921,961 * * * *
------------------------------------------------------------------------------------------------------------------------------------
3230343-00 2975667 ASM FAN TRAY 921/961 ACS CABINET 921,961 * * * *
------------------------------------------------------------------------------------------------------------------------------------
3230350-00 2977903 ASM SOURCE SWITCH FRONT 921,961 * * * *
------------------------------------------------------------------------------------------------------------------------------------
3230351-00 2977812 ASM ROD SOURCE LIMIT SWITCH-REAR 921,961 * * * *
------------------------------------------------------------------------------------------------------------------------------------
3230352-00 2977655 ASM ROD SOURCE MOTOR (UPGRADE QUIET) 921,961 * * * *
------------------------------------------------------------------------------------------------------------------------------------
3230365-01 3546129 ASM PWR SUPPLY FIELD UPGRADE * * * *
------------------------------------------------------------------------------------------------------------------------------------
3230366-00 2978083 ASM KIT PALLET FIELD UPGRADE EXACT,HR * * * *
------------------------------------------------------------------------------------------------------------------------------------
3230372-00 3551822 ASM HARDWARE/CABLE FIBER OPTIC CONS UTIL * * * *
------------------------------------------------------------------------------------------------------------------------------------
3230402-00 2977598 ASM CPU PWB 16MBYTE SPARC 2 * * * *
------------------------------------------------------------------------------------------------------------------------------------
* Omitted information is the subject of a request for confidential treatment
pursuant to Rule 406 under the Securities Act of 1933 and has been filed
separately with the Securities and Exchange Commission.
102
<PAGE>
TRANSFER
REQUIRED WORLD PRICE TO CREDIT
SIEMENS LEAD TIME BASE DISTRIBUTOR FOR
CTI PART # PART # DESCRIPTION WHERE USED (# WEEKS) PRICE (50% DISC) RETURNS
------------------------------------------------------------------------------------------------------------------------------------
3230433-00 3550170 ASM SEPTA GEAR MOTOR FAST SEPTA EXACT,HR,HR+ * * * *
------------------------------------------------------------------------------------------------------------------------------------
3230444-01 3551475 ASM MOTOR HORIZONTAL 180:1 Gear Ratio 921,961,BED * * * *
------------------------------------------------------------------------------------------------------------------------------------
3230450-00 35 45 238 Horizontal Limit Switch ART, EXACT * * * *
------------------------------------------------------------------------------------------------------------------------------------
3230451-00 3545261 ASM SWITCH PALLET RELEASE 921,961,BED * * * *
------------------------------------------------------------------------------------------------------------------------------------
3230453-00 3545162 ASM MOTOR VERTICAL 921,961 * * * *
------------------------------------------------------------------------------------------------------------------------------------
3230455-00 3547093 ASM SWITCH ENCODER/ZERO ART * * * *
------------------------------------------------------------------------------------------------------------------------------------
3230456-00 3547127 ASM BRUSH BLOCK * * * *
------------------------------------------------------------------------------------------------------------------------------------
3230463-00 3547010 ASM DRIVE MOTOR ART ART * * * *
------------------------------------------------------------------------------------------------------------------------------------
3230484-00 3549230 ASM ROD SOURCE LEFT ART * * * *
------------------------------------------------------------------------------------------------------------------------------------
3230485-00 3549222 ASM ROD SOURCE RIGHT ART * * * *
------------------------------------------------------------------------------------------------------------------------------------
3230505-01 3549073 ASM CPU PCB 68030/68882 VMEBUS WO/LIC EXACT * * * *
------------------------------------------------------------------------------------------------------------------------------------
3230510-00 3552101 ASM TRANSFORMER/DRIVER ART ART * * * *
------------------------------------------------------------------------------------------------------------------------------------
3230532-00 3549057 ASM POWER SUPPLY COMMUNICATION CONTROL ART * * * *
------------------------------------------------------------------------------------------------------------------------------------
3230542-00 3549941 ASM ROD SOURCE PHOTOINTERRUPTER SWITCH ART * * * *
------------------------------------------------------------------------------------------------------------------------------------
3230545-00 3551467 ASM MOTOR VERTICAL 921,961,ART,HR+ * * * *
------------------------------------------------------------------------------------------------------------------------------------
3230610-00 3550709 ASM HR++ DETECTOR CABLE-HAMMERSMITH ONLY HAMMERSMITH only * * * *
------------------------------------------------------------------------------------------------------------------------------------
3230614-00 ASM Front Panel Bezel Kit * * * *
------------------------------------------------------------------------------------------------------------------------------------
3230617-00 3551350 FIELD MAINTENANCE KIT SLOW ROD SOURCE 921,961,HR+ * * * *
------------------------------------------------------------------------------------------------------------------------------------
3230617-01 3551459 FIELD MAINTENANCE KIT FAST ROD SOURCE 921,961,HR+ * * * *
------------------------------------------------------------------------------------------------------------------------------------
3230618-00 3552325 Sparc CPU-5 Assembly ART, HR+ * * * *
------------------------------------------------------------------------------------------------------------------------------------
3230619-00 ASM Drive Motor ART * * * *
------------------------------------------------------------------------------------------------------------------------------------
3230653-00 3553158 ASM 4mm Tape Upgrade ACS * * * *
------------------------------------------------------------------------------------------------------------------------------------
3230672-00 35 53 711 ART Point Source Motor ART * * * *
------------------------------------------------------------------------------------------------------------------------------------
3230673-00 35 53 729 Point Source Optical Switch ART * * * *
------------------------------------------------------------------------------------------------------------------------------------
3230715-00 35 53 422 Encoder (serial # 10+) ART * * * *
------------------------------------------------------------------------------------------------------------------------------------
3230734-00 35 54 024 Encoder ASM (mounted at the top) ART * * * *
------------------------------------------------------------------------------------------------------------------------------------
3240039-03 4799722 ASM UNIFORM PHANTOM 20CM X 20CM 953 * * * *
------------------------------------------------------------------------------------------------------------------------------------
3240065-00 ASM PHANTOM SOURCE HOLDER 951 * * * *
------------------------------------------------------------------------------------------------------------------------------------
3240131-01 2952997 ASM SPARE FUSE GANTRY 921 * * * *
------------------------------------------------------------------------------------------------------------------------------------
3240160-01 ASM DETECTOR ELECTRONICS TOSHIBA ASIC 961,HR+ * * * *
------------------------------------------------------------------------------------------------------------------------------------
* Omitted information is the subject of a request for confidential treatment
pursuant to Rule 406 under the Securities Act of 1933 and has been filed
separately with the Securities and Exchange Commission.
103
<PAGE>
TRANSFER
REQUIRED WORLD PRICE TO CREDIT
SIEMENS LEAD TIME BASE DISTRIBUTOR FOR
CTI PART # PART # DESCRIPTION WHERE USED (# WEEKS) PRICE (50% DISC) RETURNS
------------------------------------------------------------------------------------------------------------------------------------
3240168-00 3551848 OPERATORS SOFTWARE 7.0 MANUAL SET * * * *
------------------------------------------------------------------------------------------------------------------------------------
3240169-02 3552606 OPERATORS HARDWARE MANUAL SET 961 * * * *
------------------------------------------------------------------------------------------------------------------------------------
3240169-03 3552614 OPERATORS HARDWARE MANUAL SET 922 * * * *
------------------------------------------------------------------------------------------------------------------------------------
3270592-02 3548414 IC PROM 27C256 SF/0340034 EXACT,HR+ * * * *
------------------------------------------------------------------------------------------------------------------------------------
3300037-00 3550881 PINION ROD SOURCE 951B 951 * * * *
------------------------------------------------------------------------------------------------------------------------------------
3300047-00 1761068 PINION/HOLDER ROD SOURCE 921 EXACT * * * *
------------------------------------------------------------------------------------------------------------------------------------
3300055-00 3552200 COVER LASER PWB 921/961 * * * *
------------------------------------------------------------------------------------------------------------------------------------
3300083-00 2977499 ASM PALLET PAD BED ECAT EXACT 921 * * * *
------------------------------------------------------------------------------------------------------------------------------------
3300084-00 2978661 ASM PALLENT SUPPORT BED 921 * * * *
------------------------------------------------------------------------------------------------------------------------------------
3300090-00 3551863 ASM HOLDER/PINION ROD SOURCE 961,HR+ * * * *
------------------------------------------------------------------------------------------------------------------------------------
3300105-00 3552655 PIG ROD SOURCE 921,961,HR+ * * * *
------------------------------------------------------------------------------------------------------------------------------------
3300123-00 3545279 PALLET CARBON FIBER WHOLE BODY EXACT,HR,ART,HR+ * * * *
------------------------------------------------------------------------------------------------------------------------------------
3300141-00 3550600 COVER END UPPER VERTICAL BED * * * *
------------------------------------------------------------------------------------------------------------------------------------
3300145-00 3551483 PAD PALLET VERTICAL BED * * * *
------------------------------------------------------------------------------------------------------------------------------------
3300147-00 3546756 COVER FRONT ART * * * *
------------------------------------------------------------------------------------------------------------------------------------
3300148-00 3546764 COVER REAR ART * * * *
------------------------------------------------------------------------------------------------------------------------------------
3300171-00 3545287 ASSY HEADREST 012 BED BED * * * *
------------------------------------------------------------------------------------------------------------------------------------
3300188-00 3551889 ASM DETECTOR MTG SHAFT HR+ * * * *
------------------------------------------------------------------------------------------------------------------------------------
3300196-00 3549354 COVER FOOT BED * * * *
------------------------------------------------------------------------------------------------------------------------------------
3390010-14 3552655 ASM HOSE WATER 103" L 921 * * * *
------------------------------------------------------------------------------------------------------------------------------------
4100020-03 2951031 CABLE ADAPTOR 13W3-BNC, CG6 #530-1446 95X,921,961 * * * *
------------------------------------------------------------------------------------------------------------------------------------
4100029-00 2953144 CABLE SCSI 12FT DB50 TO MINI SCSI-II MAL 95X,921,ART * * * *
------------------------------------------------------------------------------------------------------------------------------------
4100039-00 3550642 CABLE SCSI CENT50 MALE TO SCSI II MALE * * * *
------------------------------------------------------------------------------------------------------------------------------------
4100046-00 3549602 CABLE 15 COND FLAT RIBBON CUSTOM HR,HR+ * * * *
------------------------------------------------------------------------------------------------------------------------------------
4100047-00 3548570 CBL FIBER OPTIC 4 COND 100' FIBERTRON 921,961 * * * *
------------------------------------------------------------------------------------------------------------------------------------
4100048-00 3552838 CBL FIBER OPTIC 2 COND 4' FIBERTRON 961,HR+ * * * *
------------------------------------------------------------------------------------------------------------------------------------
4100053-01 3550030 CBL SERIAL 4'F/FORCE CPU-2CE X 5297C-040F HR,HR+ * * * *
------------------------------------------------------------------------------------------------------------------------------------
4100063-01 3550261 CABLE 10-BASE-T 12'L CROSSOVER EXACT,HR,HR+ * * * *
------------------------------------------------------------------------------------------------------------------------------------
4100063-03 3551376 CABLE 10-BASE-T 10'L CROSSOVER 961 * * * *
------------------------------------------------------------------------------------------------------------------------------------
5000028-00 1557961 HOST ADAPTER CIPRICO RIMFIRE SCSI #3513 95X,921 * * * *
------------------------------------------------------------------------------------------------------------------------------------
* Omitted information is the subject of a request for confidential treatment
pursuant to Rule 406 under the Securities Act of 1933 and has been filed
separately with the Securities and Exchange Commission.
104
<PAGE>
TRANSFER
REQUIRED WORLD PRICE TO CREDIT
SIEMENS LEAD TIME BASE DISTRIBUTOR FOR
CTI PART # PART # DESCRIPTION WHERE USED (# WEEKS) PRICE (50% DISC) RETURNS
------------------------------------------------------------------------------------------------------------------------------------
5000029-01 2951502 MODULE CPU 68020 BASED #MZ7124 4MB MEM 95X,921 * * * *
------------------------------------------------------------------------------------------------------------------------------------
5010014-00 4788816 CARD SET ARRAY PROCESSOR AP471 93X,95X * * * *
------------------------------------------------------------------------------------------------------------------------------------
5010028-00 1563134 VME MEMORY 16MBYT/ACS * * * *
------------------------------------------------------------------------------------------------------------------------------------
5010036-00 1557979 ETHERNET CONT/ARBITER ENP-10L 95X,921,961 * * * *
------------------------------------------------------------------------------------------------------------------------------------
5010043-00 2953193 TRANSCEIVER BNC TO AUI #ATD MIL-05T 921,961 * * * *
------------------------------------------------------------------------------------------------------------------------------------
5010044-00 1797955 VME 32MB RAM CHRISLIN CI-VME-40/32 REVA4 921,961 * * * *
------------------------------------------------------------------------------------------------------------------------------------
5010067-01 2979560 BACKPLANE VSB 2SLOT 32 BIT EXPANSION ACS UPGRADE * * * *
------------------------------------------------------------------------------------------------------------------------------------
5010068-01 2979545 MEMORY 16MB DYNAMIC MODULE 4096 X 32 GATING OPTION * * * *
------------------------------------------------------------------------------------------------------------------------------------
5010069-00 3547994 SUPERCARD SC-4/VME MULTIPROC W/64MB RAM EXACT,HR,HR+ * * * *
------------------------------------------------------------------------------------------------------------------------------------
5010070-00 3550220 INT SBUS FAST SCSI-2 BUFFRD ETHERNET HR,ART,HR+ * * * *
------------------------------------------------------------------------------------------------------------------------------------
5010071-00 35 49 982 Interface SBUS Ethernet Controller ART * * * *
------------------------------------------------------------------------------------------------------------------------------------
5010074-00 3553067 Opto-Isolator SP400A RS232 ART * * * *
------------------------------------------------------------------------------------------------------------------------------------
5010076-00 Backplane VME BUS 21-Slot 95X * * * *
------------------------------------------------------------------------------------------------------------------------------------
5010095-00 CONVERTER MEDIA 10 BASE-T/BNC TWISTER 10 ACS II UPGRADE * * * *
------------------------------------------------------------------------------------------------------------------------------------
5010097-00 35 54 370 Transceiver 10BASET (for 7.2 systems) ART * * * *
------------------------------------------------------------------------------------------------------------------------------------
5020024-03 1780274 DISK OPTICAL 5.25 REMOVEABLE ERASABLE 95X,921,961 * * * *
------------------------------------------------------------------------------------------------------------------------------------
5020024-12 3548794 SOFTWARE INSPIRE VERSION 3.1 SOFTWARE * * * *
------------------------------------------------------------------------------------------------------------------------------------
5020024-14 3552408 SW MANUAL INSPIRE VER 3.2 921,961 * * * *
------------------------------------------------------------------------------------------------------------------------------------
5020030-00 2977036 DISK 669MB SCSI 5.25" INTERNAL SUN RATPET * * * *
------------------------------------------------------------------------------------------------------------------------------------
5020035-00 3547861 DRIVE CD-ROM 644MB INTERNAL #CD-0644-A HR,HR+ * * * *
------------------------------------------------------------------------------------------------------------------------------------
5020036-00 3547846 DISK OPTICAL 1.3GB 5.25" ALPHATRONIX EXACT * * * *
------------------------------------------------------------------------------------------------------------------------------------
5020036-01 3551418 MEDIA 1.3GB 5.25" MAGNETO OPTICAL #89109 921,961 * * * *
------------------------------------------------------------------------------------------------------------------------------------
5020036-02 3550212 DISK OPTICAL 1.3GM 5.25" ARTECON HR,.HR+ * * * *
------------------------------------------------------------------------------------------------------------------------------------
5020037-00 2979529 DRIVE CD-ROM 644MB EXTERNAL DESKTOP 921,961,ART * * * *
------------------------------------------------------------------------------------------------------------------------------------
5020040-00 3547182 HARD DISK 1GB 3.5" INTERNAL HH BLK ART * * * *
------------------------------------------------------------------------------------------------------------------------------------
5020042-00 3547895 HARD DISK 2.1GB BARRACUDA 3.5" HH SCSI-2 961,HR+ * * * *
------------------------------------------------------------------------------------------------------------------------------------
5020043-00 3547820 HARD DISK 1.2GB INTERNAL BLACK BEZEL EXACT,HR * * * *
------------------------------------------------------------------------------------------------------------------------------------
5020046-00 DRIVE DISC 5.25" ELITE 9 SCSI ST410800N 961,HR+ * * * *
------------------------------------------------------------------------------------------------------------------------------------
5020047-00 3552366 DISK OPTICAL 2.6GB HH 5.25" 921,HR+ * * * *
------------------------------------------------------------------------------------------------------------------------------------
5020047-01 3552358 MEDIA 2.66GB FOR OPTICAL DISK 921,ART,HR+ * * * *
------------------------------------------------------------------------------------------------------------------------------------
* Omitted information is the subject of a request for confidential treatment
pursuant to Rule 406 under the Securities Act of 1933 and has been filed
separately with the Securities and Exchange Commission.
105
<PAGE>
TRANSFER
REQUIRED WORLD PRICE TO CREDIT
SIEMENS LEAD TIME BASE DISTRIBUTOR FOR
CTI PART # PART # DESCRIPTION WHERE USED (# WEEKS) PRICE (50% DISC) RETURNS
------------------------------------------------------------------------------------------------------------------------------------
5020048-00 3552291 DRIVE HARD DISK BARRACUDA 9 GB HR+ * * * *
------------------------------------------------------------------------------------------------------------------------------------
5020049-00 3553182 1.2 MG HARD DRIVE * * * *
------------------------------------------------------------------------------------------------------------------------------------
5020052-00 18.0 GB SCSI Barracuda Hard Drive EXACT * * * *
------------------------------------------------------------------------------------------------------------------------------------
5030025-00 1558001 Disk Drive 670MB 5-1/4" SCSI #94191-7661 EXACT * * * *
------------------------------------------------------------------------------------------------------------------------------------
5030027-01 2979875 TAPE DRIVE DESKTOP EXABYTE 8MM REMOTE SPARC * * * *
------------------------------------------------------------------------------------------------------------------------------------
5030027-02 3549289 CARTRIDGE DATA 15 METER 8MM EXABYTE 921, 961 * * * *
------------------------------------------------------------------------------------------------------------------------------------
5030027-03 3549297 CARTRIDGE CLEANING 12-PASS 8MM EXABYTE EXACT,HR * * * *
------------------------------------------------------------------------------------------------------------------------------------
5030029-01 3548992 PRINTER LASERWRITER II US VER #LW1-01-2 95X * * * *
------------------------------------------------------------------------------------------------------------------------------------
5030030-01 35 53 398 RS232 Fiber Optic Modem DTE EXACT * * * *
------------------------------------------------------------------------------------------------------------------------------------
5030030-02 2951080 RS232 FIBER OPTIC MODEM DCE DEVICE 921,961 * * * *
------------------------------------------------------------------------------------------------------------------------------------
5030031-00 2954563 PRINTER LASER SPARCPRINTER W/ACCESSORIES 95X,921,961 * * * *
------------------------------------------------------------------------------------------------------------------------------------
5030034-00 3550071 TAPE 1/4" 150MB SUN DESKTOP BACKUP PACK 921,961 * * * *
------------------------------------------------------------------------------------------------------------------------------------
5030036-00 2953441 IMAGECORDER PLUS 4700 SERIES W/OPTIONS 95X,921,961 * * * *
------------------------------------------------------------------------------------------------------------------------------------
5030036-01 2953482 CAMERA 35MM W/SER FORMAT CB-4710 SPARC 10 * * * *
------------------------------------------------------------------------------------------------------------------------------------
5030037-01 3550758 ACCUSYNC 5L R-WAVE 220VAC TRIGGER DEVICE 921 * * * *
------------------------------------------------------------------------------------------------------------------------------------
5030044-00 3550816 ACCUSYNC 7 R-WAVE TRIGGERING DEVICE GATING OPTION * * * *
------------------------------------------------------------------------------------------------------------------------------------
5030047-00 3552689 PRINTER OPTRA RN+ 220V LASER ETHERNET 961,HR+,ART * * * *
------------------------------------------------------------------------------------------------------------------------------------
5040075-02 35 49 495 SPARC10 140W Power Supply ART, EXACT * * * *
------------------------------------------------------------------------------------------------------------------------------------
5040075-05 3548851 MEMORY RAM 16MB SIMM #501-2273 SPARC 10 * * * *
------------------------------------------------------------------------------------------------------------------------------------
5040075-07 3549479 MOTHERBOARD O MEMORY O CPU SPARC10 SPARC 10 * * * *
------------------------------------------------------------------------------------------------------------------------------------
5040075-10 3548166 MONITOR 20" COLOR PREMIUM SPARC 10 SPARC 10 * * * *
------------------------------------------------------------------------------------------------------------------------------------
5040075-12 35 49 487 Type 5 Keyboard ART, EXACT * * * *
------------------------------------------------------------------------------------------------------------------------------------
5040075-15 3549628 HARD DISK 1.05GB SCSI LOW PROF SPARC 10 * * * *
------------------------------------------------------------------------------------------------------------------------------------
5040077-00 3551426 MEDIA 4MM DAT CART CERT TAPE 120M 4GB EXACT,HR,ART,HR+ * * * *
------------------------------------------------------------------------------------------------------------------------------------
5040080-00 3553174 Anti-Static/Anti-Fatigue Ground Mat Kit EXACT, HR+ * * * *
------------------------------------------------------------------------------------------------------------------------------------
5050015-02 3551913 SW RUNTIME LICENSE IDL V4.01 APP DEV EXACT,HR,ART,HR+ * * * *
------------------------------------------------------------------------------------------------------------------------------------
5100001-00 4788337 PWR SPLY 5V@150A W/CR #JF751B-2000-0130 93X,95X * * * *
------------------------------------------------------------------------------------------------------------------------------------
5100008-00 4789020 POWER SUPPLY 24V@2.4 AMP 93X,95X * * * *
------------------------------------------------------------------------------------------------------------------------------------
5100013-00 4788592 POWER SUPPLY +5V@3A/+24V @ 1A 93X,95X * * * *
------------------------------------------------------------------------------------------------------------------------------------
5100028-00 9909755 POWER SUPPLY 800W REV SERIES 851,95X * * * *
------------------------------------------------------------------------------------------------------------------------------------
* Omitted information is the subject of a request for confidential treatment
pursuant to Rule 406 under the Securities Act of 1933 and has been filed
separately with the Securities and Exchange Commission.
106
<PAGE>
TRANSFER
REQUIRED WORLD PRICE TO CREDIT
SIEMENS LEAD TIME BASE DISTRIBUTOR FOR
CTI PART # PART # DESCRIPTION WHERE USED (# WEEKS) PRICE (50% DISC) RETURNS
------------------------------------------------------------------------------------------------------------------------------------
5100032-02 9909193 PWR SPLY 5V@300A 1500W #JF151A2000-4226 95X * * * *
------------------------------------------------------------------------------------------------------------------------------------
5100034-00 1555809 POWER SUPPLY 0-2KV #210-02R 95X * * * *
------------------------------------------------------------------------------------------------------------------------------------
5100039-00 2952245 POWER SUPPLY 5V 90A #LFS-45-5 921 * * * *
------------------------------------------------------------------------------------------------------------------------------------
5100048-00 2951577 PWR SUPPLY 5V 250A W/WATER COOL MTG PLTE 921,961 * * * *
------------------------------------------------------------------------------------------------------------------------------------
5100055-00 3552275 POWER SUPPLY 300W 0-1.5KW SERIES 835 961,HR+ * * * *
------------------------------------------------------------------------------------------------------------------------------------
5100062-00 3550964 POWER SUPPLY AC TO DC 100W MAX INPUT 961,HR+ * * * *
------------------------------------------------------------------------------------------------------------------------------------
5100065-01 2979586 POWER SUPPLY 750W DUAL OP 5V@120A/12V@20A * * * *
------------------------------------------------------------------------------------------------------------------------------------
5100065-03 3552085 PWR SUPPLY 800W DUAL OP 5V@120A/12V@20A * * * *
------------------------------------------------------------------------------------------------------------------------------------
5100067-00 3547200 POWER SUPPLY, 500W ART * * * *
------------------------------------------------------------------------------------------------------------------------------------
5100068-00 3547911 PWR SUPPLY 1000W 115/230VAC TRI OUTPUT EXACT,HR,HR+ * * * *
------------------------------------------------------------------------------------------------------------------------------------
5100070-00 3546814 PWR SUPPLY HV 100W 1.5P MODIFIED #2609 ART * * * *
------------------------------------------------------------------------------------------------------------------------------------
5100071-00 3549263 PWR SUPPLY 110/220VAC 28V SINGLE OUTPUT * * * *
------------------------------------------------------------------------------------------------------------------------------------
5100072-00 3550295 POWER SUPPLY 5/24V 5 CHANNEL ART * * * *
------------------------------------------------------------------------------------------------------------------------------------
5100073-00 3549909 PWR SUPPLY 500W 4OUTPUT SWITCHMODE ART * * * *
------------------------------------------------------------------------------------------------------------------------------------
5100097-00 35 53 471 Power Supply 24V 240W NES/DRP ART, EXACT * * * *
------------------------------------------------------------------------------------------------------------------------------------
5300003-10 2978703 CABLE 15' IP344 * * * *
------------------------------------------------------------------------------------------------------------------------------------
5300015-03 1764765 MONITOR 16" TRINITRON #365-1063-01 * * * *
------------------------------------------------------------------------------------------------------------------------------------
5300015-04 2951106 CABLE MONITOR #530-1870-01 95X * * * *
------------------------------------------------------------------------------------------------------------------------------------
5300021-00 1558027 PROCESSOR ARRAY CSPI 2MB MEMORY #SC-1 95X,921,BED * * * *
------------------------------------------------------------------------------------------------------------------------------------
5300035-07 3551921 MEMORY 32MB SIMM SUN #X132P/A5 SPARC20 EXACT,HR,HR+ * * * *
------------------------------------------------------------------------------------------------------------------------------------
5300039-02 3552994 SPARC 20 MOTHERBOARD MODEL 50/71 * * * *
------------------------------------------------------------------------------------------------------------------------------------
5450000-01 3551939 NEEDLE BIOMEDICAL 10" SST 921,961,HR+,ART * * * *
------------------------------------------------------------------------------------------------------------------------------------
5450001-00 3551947 CAP LUER LOK 931,921,961,HR+,ART * * * *
------------------------------------------------------------------------------------------------------------------------------------
5460000-02 4788188 LASER CABLE FIBER OPTIC 15 FT 93X,95X * * * *
------------------------------------------------------------------------------------------------------------------------------------
5460000-04 1556831 LASER GENERATOR FIBER OPTIC 3B 95X * * * *
------------------------------------------------------------------------------------------------------------------------------------
5510000-00 4788584 SERVO CONTROLLER LINEAR 7AMPS 93X,95X * * * *
------------------------------------------------------------------------------------------------------------------------------------
5510009-01 1555759 KEYBOARD SUN 1 & 1+ #320-1005 921 * * * *
------------------------------------------------------------------------------------------------------------------------------------
5510009-02 1555775 CPU PCB BOARD 4/60 SUN SPARC 1 SPARC 1 * * * *
------------------------------------------------------------------------------------------------------------------------------------
5510009-03 2953268 CPU PCB BOARD 4/65 SUN SPARC 1+ SPARC 1+ * * * *
------------------------------------------------------------------------------------------------------------------------------------
5510009-04 1555742 GX COLOR FRAME BUFFER SPARC 1, 1+ SPARC 1,1+ * * * *
------------------------------------------------------------------------------------------------------------------------------------
* Omitted information is the subject of a request for confidential treatment
pursuant to Rule 406 under the Securities Act of 1933 and has been filed
separately with the Securities and Exchange Commission.
107
<PAGE>
TRANSFER
REQUIRED WORLD PRICE TO CREDIT
SIEMENS LEAD TIME BASE DISTRIBUTOR FOR
CTI PART # PART # DESCRIPTION WHERE USED (# WEEKS) PRICE (50% DISC) RETURNS
------------------------------------------------------------------------------------------------------------------------------------
5510009-05 1555825 POWER SUPPLY 85 WATT 300-1038 SPARC 1,2 SPARC 1, 2 * * * *
------------------------------------------------------------------------------------------------------------------------------------
5510010-02 2953292 CPU PCB BOARD SPARSTATION IPX #501-1810 921,961 * * * *
------------------------------------------------------------------------------------------------------------------------------------
5510010-06 29 54 241 SCSI Cable 120mm ART * * * *
------------------------------------------------------------------------------------------------------------------------------------
5510010-07 29 54 258 Floppy Disk Cable ART, EXACT * * * *
------------------------------------------------------------------------------------------------------------------------------------
5510010-08 2954266 Drive Floppy 1.4MB SUN #370-1354 * * * *
------------------------------------------------------------------------------------------------------------------------------------
5510011-01 2977101 MOUSE/PAD SUN4 #365-1059 921,961 * * * *
------------------------------------------------------------------------------------------------------------------------------------
5510011-05 2951650 MONITOR 16" COLOR SPARC #365-1130 921,961 * * * *
------------------------------------------------------------------------------------------------------------------------------------
5510011-07 2951841 DISK DRIVE 207 MB SPARC 2 #370-1327 921,961 * * * *
------------------------------------------------------------------------------------------------------------------------------------
5510011-08 2976541 BOARD S-BUS GX COLOR GRAPHICS * * * *
------------------------------------------------------------------------------------------------------------------------------------
5510022-02 3547341 CPU SPARC VMEBUS 80MHZ32MB MEMORY HR,HR+ * * * *
------------------------------------------------------------------------------------------------------------------------------------
5510023-04 3552192 BATTERY REPLACEMENT FOR -00 REV 3 BOARD 921/961/ACS II * * * *
------------------------------------------------------------------------------------------------------------------------------------
5510024-00 3547283 MEMORY 64MB DRAM DUA PORT HR,HR+ * * * *
------------------------------------------------------------------------------------------------------------------------------------
5510024-01 Memory Module 256MB RAM C1-VME * * * *
------------------------------------------------------------------------------------------------------------------------------------
5510025-00 3547325 ADAPTER HOST BUS VMEBUS FAST SCSI-2 EXACT,HR,HR+ * * * *
------------------------------------------------------------------------------------------------------------------------------------
5510026-01 3549552 DRIVE OPTICAL 1.3GB 5.25" ERASABLE 921,HR+ * * * *
------------------------------------------------------------------------------------------------------------------------------------
5510027-00 3546574 DRIVE TAPE 4MM DAT EXACT,HR,HR+ * * * *
------------------------------------------------------------------------------------------------------------------------------------
5550001-02 3551962 PCB BRUSH BLOCK ASSY ART * * * *
------------------------------------------------------------------------------------------------------------------------------------
5610018-04 3545329 CIRCUIT BREAKER 2-POLE 2.5 AMP RAIL MTG 921,961,bed * * * *
------------------------------------------------------------------------------------------------------------------------------------
5610023-10 3546889 CIRCUIT PROTECTOR 5 AMP 961 * * * *
------------------------------------------------------------------------------------------------------------------------------------
5610026-01 35 46 905 Circuit Breaker 2 pole 10A ART * * * *
------------------------------------------------------------------------------------------------------------------------------------
5610026-02 35 46 913 Circuit Breaker 2 pole 6A ART * * * *
------------------------------------------------------------------------------------------------------------------------------------
5610028-02 3551004 CIRCUIT BREAKER AM/S 12AMP 921,HR+ * * * *
------------------------------------------------------------------------------------------------------------------------------------
5610029-01 3549651 CIRCUIT BRKR 250V 2.5A 2-POLE THERMAL MA VERTICAL BED * * * *
------------------------------------------------------------------------------------------------------------------------------------
5610029-02 3551277 Circuit Breaker 250V 12A 2-Pole Thermal EXACT, HR+ * * * *
------------------------------------------------------------------------------------------------------------------------------------
5630006-00 3050556 FAN 220V 50/60HZ 175CFM 93x,95x * * * *
------------------------------------------------------------------------------------------------------------------------------------
5630015-04 2978497 FAN 220V 50/60HZ #146DF-2181 * * * *
------------------------------------------------------------------------------------------------------------------------------------
5630016-00 2951114 FAN PATRIOT DC 12V 6.75" DIA 921,961 * * * *
------------------------------------------------------------------------------------------------------------------------------------
5630018-02 2953417 FAN 10" 560CFM 230V W/.110" TERM 921,961 * * * *
------------------------------------------------------------------------------------------------------------------------------------
5630023-00 2977028 FAN 230VAC 100CFM BALL BEARING 921,961 * * * *
------------------------------------------------------------------------------------------------------------------------------------
5630030-00 3547275 FAN 4.69" X 1.0" 12 VOLT 1.8 WATT EXACT,HR,HR+ * * * *
------------------------------------------------------------------------------------------------------------------------------------
* Omitted information is the subject of a request for confidential treatment
pursuant to Rule 406 under the Securities Act of 1933 and has been filed
separately with the Securities and Exchange Commission.
108
<PAGE>
TRANSFER
REQUIRED WORLD PRICE TO CREDIT
SIEMENS LEAD TIME BASE DISTRIBUTOR FOR
CTI PART # PART # DESCRIPTION WHERE USED (# WEEKS) PRICE (50% DISC) RETURNS
------------------------------------------------------------------------------------------------------------------------------------
5630031-00 3547002 FAN TUBE AXIA 6.75" DIA 2.0" DEEP 220/230V ART * * * *
------------------------------------------------------------------------------------------------------------------------------------
5650013-01 4789046 ENCODER OPTICAL BEI #E152-500T 93x,95x * * * *
------------------------------------------------------------------------------------------------------------------------------------
5650013-02 9452525 ENCODER OPTICAL BEI #EX152-1000T ART,953B * * * *
------------------------------------------------------------------------------------------------------------------------------------
5650017-08 3553000 GEARMOTOR TYP IM-15 409A6185-3 953 * * * *
------------------------------------------------------------------------------------------------------------------------------------
5650030-00 2951122 ENCODER OPTICAL ROTATING 1800CPR 921,961,HR+, BED * * * *
------------------------------------------------------------------------------------------------------------------------------------
5650045-00 3545170 CLUTCH WARNER ELECTRIC 921,961,ART,HR+,BED * * * *
------------------------------------------------------------------------------------------------------------------------------------
5650049-00 3551988 ENCODER OPTICAL E2 2/3 CHANNEL ART,POINT SOURCE * * * *
------------------------------------------------------------------------------------------------------------------------------------
5650051-00 3549206 DRIVER STEP MOTOR FULL/HALK STEP 2A 35V ART * * * *
------------------------------------------------------------------------------------------------------------------------------------
5650053-00 3552630 GEAR/MOTOR/1/4 HP 5:1 130VDC MODEL #4179 ART * * * *
------------------------------------------------------------------------------------------------------------------------------------
5650054-00 3549131 DRIVER GEAR MTR 1/4-.29HP W/INTERFACE CRD ART * * * *
------------------------------------------------------------------------------------------------------------------------------------
5650062-00 35 53 414 Gear Motor Parallel Shft (serial # 19+) ART * * * *
------------------------------------------------------------------------------------------------------------------------------------
5650063-00 35 53 430 Driver Gearmotor Control (sesrial # 19+) ART * * * *
------------------------------------------------------------------------------------------------------------------------------------
5670002-00 3550113 FILTER RFI PWR LINE 12A@250VAC 921,ART,HR+ * * * *
------------------------------------------------------------------------------------------------------------------------------------
7020013-00 2954571 GREASE MULTI-LUBE "SPECIAL MOLY EP #608" 921,961,BED,HR+ * * * *
------------------------------------------------------------------------------------------------------------------------------------
7020021-00 3552184 LUBRICANT BALL SCREW * * * *
------------------------------------------------------------------------------------------------------------------------------------
7090005-00 3550089 ADHESIVE REMOVABLE THREADLOCKER 951 * * * *
------------------------------------------------------------------------------------------------------------------------------------
9300014-00 3546202 INSTRUCTIONS OPERATING ECAT EXACT & HR * * * *
------------------------------------------------------------------------------------------------------------------------------------
9340015-00 3550139 MANUAL SW VER 7.0 ECAT HR,ART,HR+ * * * *
------------------------------------------------------------------------------------------------------------------------------------
9340018-00 3550147 BINDER SOFTWARE DOC (VER 7.0 & NEWER) * * * *
------------------------------------------------------------------------------------------------------------------------------------
9340024-00 3552648 MANUAL SW VER 7.0.3 ECAT * * * *
------------------------------------------------------------------------------------------------------------------------------------
9380003-00 Svc Manual - EXACT 922/962 EXACT, HR+ * * * *
------------------------------------------------------------------------------------------------------------------------------------
9640451-00 3546624 TOOL DETECTOR RELEASE 921,ART * * * *
------------------------------------------------------------------------------------------------------------------------------------
9640483-00 2979206 TOOL ASM MOVER EXACT EXACT * * * *
------------------------------------------------------------------------------------------------------------------------------------
9640502-00 3549925 TOOL DETECTOR REMOVAL EXACT 31/47 EXACT * * * *
------------------------------------------------------------------------------------------------------------------------------------
9640687-00 3549305 TOOL KIT ROLL-A-LIFT ADAPTER ART,BED * * * *
------------------------------------------------------------------------------------------------------------------------------------
9640700-00 3548265 SYRINGE LUBRICATION 30CC ART ART * * * *
------------------------------------------------------------------------------------------------------------------------------------
9640701-00 3548257 SYRINGE LUBRICATION 10CC 921/961 921,961 * * * *
-----------------------------------------------------------------------------------------------------------------------------------
9640705-00 3549859 TOOL FLEX CABLE REMOVAL HR,HR+ * * * *
-----------------------------------------------------------------------------------------------------------------------------------
* Omitted information is the subject of a request for confidential treatment
pursuant to Rule 406 under the Securities Act of 1933 and has been filed
separately with the Securities and Exchange Commission.
109
<PAGE>
Exhibit I
Source Specifications
UNIFORM PHANTOM SOURCES
A solid suspension of (68) Ge encased in a cylindrical shell. The active volume
of the uniform distribution phantom is a right circular cylinder 20 cm in
diameter by 20 cm (6.28 liters). Each phantom is to be accompanied by an
approximately 1 cm (3) sample (aliquot) of the (68) Ge.
Phantom Type Nominal Activity
-----------------------------------------------------
High Activity (2D) 3.25 mCi (111 MBq)
Low Activity (3D) 1.2 mCi (44 MBq)
Absolute Activity Accuracy: +/-5% of measured value, traceable to National
Institute of Standards and Technology. Within -0%,
+25% of indicated recommended value.
External Contamination: guaranteed to be below detectable limits
(<0.005 uCi/cm (3)).
ANSI Classification: ANSI 96CC22212.
All sources must pass the following test conditions without leakage:
Temp. Range: . . . . . . -40 to +80(degree)C
Pressure Range: . .. . . 25 kN/M (2) abs. to atmosphere
Impact Test: . . . . . . . 50 gram hammer from 1 meter and
source free dropped ten times to a
steel surface from 1.5 meter.
Puncture Test: . . . . . 1 gram pin from 1 meter.
Uniformity: *differential non-uniformity measured
with resolution of 1cm (3) source volume.
Specific Gravity: 1.040-1.060; actual density measured
to+/-0.1% accuracy and provided with
the source user's manual.
ROD AND LINE SOURCES
These sources are solid (68) Ge, filled. They must be packaged in a stainless
steel tube*.
* Omitted information is the subject of a request for confidential treatment
pursuant to Rule 406 under the Securities Act of 1933 and has been filed
separately with the Securities and Exchange Commission. The following table
defines nominal required activity values.
<PAGE>
ECAT Scanner Number of Rods Nom. Activity (per rod)
EXACT 47 3 3.0 mCi (111 MBq) (transmission rod)
EXACT HR 3 5.0 mCi (185 MBq) (transmission rod)
EXACT HR+ 3 3.75 mCi (139 MBq) (transmission rod)
Accel 3 5.0 mCi (185 MBq) (transmission rod)
All EXACTs 1 <1.2 mCi (44 MBq) (set -up rod)
* The set-up rod must have a minimum strength of .5 mCi (18 MBq).
Absolute Activity Accuracy: +/-5% of measured value, traceable to National
Institute of Standards and Technology.
Within -0%, +25% of indicated
recommended value.
External Contamination: guaranteed to be below detectable limits
(<0.005 uCi/cm (3)). Leak test certificate
is shipped with each source.
ANSI Classification: 96CC22212.
Temp. Range: -40 to +80(degree)C
Pressure Range: 25 kN/M (2) abs. to atmosphere
Impact Test: 50 gram hammer from 1 meter and source free dropped ten times to a
steel surface from 1.5 meter.
Puncture Test: 1 gram pin from 1 meter.
Uniformity: *differential non-uniformity measured with
resolution of 1mm length.
All Sources:
The following requirements pertain to all sources used in ECAT scanners:
- Classified as an FDA Class 1 medical device and compliant with
all relevant FDA expectations
- CE marked under the requirements of the European Union Medical
Device Directive
- Registered as sealed sources compliant with NRC regulations
- Designed and manufactured under an ISO-9001 certified quality
system
* Omitted information is the subject of a request for confidential treatment
pursuant to Rule 406 under the Securities Act of 1933 and has been filed
separately with the Securities and Exchange Commission.
-2-
<PAGE>
EXHIBIT J
Intellectual Property Notices
1. Appearance of syngo(TM) in the Products
The brandname syngo(TM) shall appear on each Product in the following
style and location:
(i) 'syngo(TM) speaking' label at each monitor frame.
(ii) 'syngo(TM) speaking' during the startup of each Product on
each monitor for at least 5 seconds.
(iii) The 'about Product' box of the help dialogue of the Product
shall include an 'about syngo(TM)' box with
o the label 'syngo(TM) speaking'
o syngo(TM) is a registered trademark of Siemens Aktiengesellschaft,
2000; all rights reserved
o The syngo(TM)release number
o The service pack number
o Installation date of syngo(TM) in the Product
o
2. syngo(TM) styleguide
Whenever used in the Product syngo(TM) shall be written as follows:
(i) Usage of the label syngo(TM) 'speaking'
(ii) Usage of the label 'syngo(TM)'
112